Jump to content


Acer Liquid E Bricked

- - - - -
Started by shreyas1234 , May 26 2012 06:19 PM

  • Please log in to reply
6 replies to this topic

#1
shreyas1234
Posted 26 May 2012 - 06:19 PM

shreyas1234

    Newbie

  • Members
  • Pip
  • 18 posts
  • Devices:Acer Liquid E (S100)
guys pls help me,i was using liquid next 1.9.2 rom when i flashed the official 2.2 rom with acer download tool.Now my cell works with every button combo but it only vibrates and does not show any on-screen responses Posted Image
I tried and flashed 2 or 3 different bins for my device but each time i boot my phone, it keeps on vibrating and all the three notification led's blink at the same time
Plaese Help A.S.A.P


>> No Flashing dinfo.bin.
>> .bin Class is : A1
>> Read MgFl Header Ok!!
>> AMSS FileFlag : 63
>> OS FileFlag : 95
>> Please do Not remove USB cable, unless the program indicates you can do it.
>> Download Process Started at AMSS mode.
>> Hex file Start
>> Hex file Succ !!
>> AMSS Start
>> AMSS Succ !!
>> Cmd [AMSS => Fastboot]
>> Wait UsbEvent [AMSS => Fastboot]
>> No UsbEvent [AMSS => Fastboot], Now quit process...
>> Process finished. [Not Succ]
>> Process Result : Download Process was failed...
>> Process finished, USB cable can be removed now.

#2
cliclicli
Posted 26 May 2012 - 10:44 PM

cliclicli

    Newbie

  • Members
  • Pip
  • 23 posts
  • Devices:acel liquid S100
you must only recharge your battery....when you plug an ac adapter...the screen is in withe color loop for few seconds?

Edited by cliclicli, 26 May 2012 - 10:44 PM.

#3
shreyas1234
Posted 27 May 2012 - 04:22 AM

shreyas1234

    Newbie

  • Members
  • Pip
  • 18 posts
  • Devices:Acer Liquid E (S100)
tried but it just vibrates once and after a few seconds it starts vibrating continuously and the three led'd at top all blink at the same time and no screen response

#4
vosal
Posted 27 May 2012 - 09:54 AM

vosal

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:liquid e
Try to put him in download mode, start ith putt off the battery and the usb cable first than put the battery in and try to start the liquid with the kay combo volume up, photocamera key and power. Now you can put the usb cable and your liquid should be recognized by acer tools, reflash the bin and your phone will came to normaly

#5
shreyas1234
Posted 27 May 2012 - 10:34 AM

shreyas1234

    Newbie

  • Members
  • Pip
  • 18 posts
  • Devices:Acer Liquid E (S100)
i can flash the bin perfectly but after flashing my cell does not boot up and starts vibrating like hell and the three led's at top keep blinking

#6
shreyas1234
Posted 27 May 2012 - 02:48 PM

shreyas1234

    Newbie

  • Members
  • Pip
  • 18 posts
  • Devices:Acer Liquid E (S100)
here is the latest log

=================================================================
===================== Debug Log Start !! ========================
=================================================================
Program version is       : acer Download Tool [RD] v1.282 (20110214) --  Edit By Ma
Process Starting Time is : 20 : 13 : 48



[FileChecking] : [Info] : dinfo.bin full path : D:\A1_DL_Tool_[Intra][Single]_v3.100_20091027\DevInfo.bin
[VerInfo] : [Error] : MergedFile is not A4.
[VerInfo] : [Info] : merged os file is : Acer_LiquidE_4.005.05_AAP-GEN2
[MergedOSFileClass] : [Info] : MergedOSFile Class is : A1
[FM] : [Info] : FM  not Ok.
[FM] : [Info] : FM  not Ok.
[FM] : [Info] : FM  Ok!!
[ReadFlHd] : [Info] : File for Read is : D:\A1_DL_Tool_[Intra][Single]_v3.100_20091027\ACER_A1_Bin\acer_MergedOSFile.bin


[FF] : [Info] : AMSS : 63
[FF] : [Info] : OS   : 127


[Mode] : [Info] : Download Process started at AMSS mode
[SerialPort] : [Info] : TryTimes is : 0
[SerialPort] : [Info] : Port open !
[SerialPort] : [Info] : Discard in, out Buf !
[GetPhVer@DMSS] : [Warning] : AMSSVer, buf[0], buf[1] Not Recognized
[GetPhVer@DMSS] : [Warning] : AMSSVer, buf[0], buf[1] Not Recognized
[GetPhVer@DMSS] : [Warning] : AMSSVer, buf[0], buf[1] Not Recognized
[GetPhVer@DMSS] : [Warning] : OSVer, buf[0], buf[1] Not Recognized
[GetPhVer@DMSS] : [Warning] : OSVer, buf[0], buf[1] Not Recognized
[GetPhVer@DMSS] : [Warning] : OSVer, buf[0], buf[1] Not Recognized
[UserSelect] : [Info] : User select A1
[Hex] : [Info] : Connect COM Port.
[Hex] : [Info] : Connect --- Port Open Ok !
[Hex] : [Info] : Connect --- Discard in and out buffer Ok !
[SerialPort] : [Info] : ConnCOMPort Rst : False


-----------------------------------------------------------------
----------------- [Info] : Hex file Start -----------------------
-----------------------------------------------------------------
[HexFile] : [Info] : .hex for using is : C:\Users\SAM\Desktop\acer liquid download tool\A1_NPRG8650.hex
[Hex] : [Info] : Hex's Rx thread is ready !
[Hex] : [Info] : Hex's Tx thread is ready !
[Hex] : [Info] : Reset UsbEvent_Hex
[Hex] : [Info] : HexData Tx is finished.
[Hex] : [Info] : Send Cmd before USB dis-connected.
[Hex] : [Info] : and ten, USB is going to be dis-connected.
[Hex] : [Info] : USB dis-connected - OK!!
[Hex] : [Info] : Now, wait UsbEvent
[Hex] : [Info] : Re-get AMSS Com Port is : COM37
[Hex] : [Info] : We are goint to Re-connect COM Port.
[Hex] : [Info] : Connect COM Port.
[Hex] : [Info] : Connect --- Port Open Ok !
[Hex] : [Info] : Connect --- Discard in and out buffer Ok !
-----------------------------------------------------------------
----------------- [Info] : Hex file Finished --------------------
-----------------------------------------------------------------


-----------------------------------------------------------------
-------------------- [Info] : AMSS  Start -----------------------
-----------------------------------------------------------------
[AMSS] : [Info] : AMSS's Rx thread is ready !
[AMSS] : [Info] : AMSS's Tx thread is ready !
[AMSS] : [Info] : @ PartitionTable
[AMSS] : [Info] : @ PartitionTable_Rsp
[AMSS] : [Info] : PT Same
[Time] : [Info] : Start : 20 : 14 : 15
[AMSS] : [Info] : Timeout setting is : 20000
[AMSS] : [Info] : DBL  OK
[AMSS] : [Info] : Timeout setting is : 20000
[AMSS] : [Info] : FSBL  OK
[AMSS] : [Info] : Timeout setting is : 20000
[AMSS] : [Info] : OSBL  OK
[AMSS] : [Info] : Timeout setting is : 43000
[AMSS] : [Info] : AMSS  OK
[AMSS] : [Info] : Timeout setting is : 20000
[AMSS] : [Info] : APPSBOOT  OK
[AMSS] : [Info] : Timeout setting is : 34000
[AMSS] : [Info] : DSP1  OK
[Time] : [Info] : End : 20 : 16 : 36
[AMSS] : [Info] : AMSS All  OK.
[AMSS] : [Info] : goint to Close and Dispose COM Port.
[AMSS] : [Info] : AMSS Succ!!
-----------------------------------------------------------------
-------------------- [Info] : AMSS Finished ---------------------
-----------------------------------------------------------------


[ChangeMode] : [Info] : Change mode Start !! [AMSS => Fastboot  or  Restart]
[SerialPort] : [Info] : TryTimes is : 0
[SerialPort] : [Info] : Port open !
[Rx_getpk] : [Warning] : This Exp is not an Error.
[Rx] : [Warning] : RxData Length <= 0
[Rx] : [Warning] : SpFlag_PoolValueIndicator : 15
[SerialPort] : [Info] : Discard in, out Buf !
[ChangeMode] : [Info] : Port is Disposed
[UsbEvent] : [Info] : Wait UsbEvent [AMSS => Fastboot]
[UsbEvent] : [Error] : No UsbEvent [AMSS => Fastboot], timeout...
[FinalResult] : [Info] : one of Flag_Process is failed...

#7
shreyas1234
Posted 05 June 2012 - 05:09 PM

shreyas1234

    Newbie

  • Members
  • Pip
  • 18 posts
  • Devices:Acer Liquid E (S100)
thanx for your fast replies i've got my cell back repaired from the acer care centre

Back to Acer Liquid - Liquid.MoDaCo.com · Next Unread Topic →


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

  1. MoDaCo
  2. → Device Specific - Android Phones
  3. → Acer
  4. → Acer Liquid - Liquid.MoDaCo.com