If you have anything to add, please post below!
Updated By Ricky Wyatt 31/07/2012
- We have now found the intel MEDFIELD flasher and drivers but cant be used untill we find the right GT Flag
- The flasher and drivers can be found here http://www.mediafire...67cezkql2z4j4jc
- We can now flash the Xolo x900 Gingerbread 2.3..7 so debranding San Diego found here http://www.modaco.co...ireless-screen/
- We still cant get root
- We Found out that the chinese intel K800 uses a different boot.bin radio.bin recovery and modem
----------------------------------------------------------------------------------------------------------------------------
- Bootloader can be accessed via 'adb reboot bootloader', which is then accessible using 'fastboot -i 0x8087' and the appropriate command
- Recovery can be accessed via 'adb reboot recovery'
- Powering on with volume down and power held also works for the above
- Recovery will only flash valid signed zips
- ADB is not available in recovery
- There seem to be different signatures for Intel's own devices, the Lava devices and the San Diego
- Test builds of Gingerbread and ICS are signed with test keys and will not flash on retail recovery images
- We have a build of ICS - but we can't flash it for the above reason
- 'fastboot boot' does not work on the device - it seems to push but does not boot
- 'fastboot flash' appears to complete - I flashed a recovery image - but it bricked the device
- Fastboot flash of the boot image is untested for obvious reasons
- We have access to engineering test Gingerbread and ICS images for research
- The boot and recovery binaries can be extracted by trimming to the second gzip header and using cpio
- As of yet we have found no usable vulnerabilities in init files
- As of yet we have no usable kernel exploits
- Turning the device on with the camera button pressed seems to access a special mode (displaying 'MEDFIELD' in USB settings), maybe for Intel's own flash tools? (a-la-nvflash)
- The software update client can be launched with 'adb shell am start -n com.softwareupdate/com.softwareupdate.SoftwareUpdateSettings'
- The software update client can be configured to use the test server with 'adb shell am start -n com.softwareupdate/com.softwareupdate.ServerSetActivity'







Sign In
Create Account



Back to top














