3143 replies to this topic

[bezerra]

Ganster, on 25 November 2012 - 04:40 PM, said:

Yes, may be later I build "final" CM9 build with latest OMX patches. Now I haven't much time for correct all.

it will be great Ganster! Thanks

[anantk]

fileek, on 24 November 2012 - 04:48 PM, said:

masterlud: Enable auto-rotate on homescreen, turn the phone to landscape and run camera app again. It should be OK.

No. Unfortunately Camera app is broken in this latest 1124 ROM.

Camera show visible disturbance a lot when you start camera app, while taking picture. Even if you change it to landscape with auto-rorate enable, same issue. Only solution I could find is to toggle camera mode to Camcorder mode and then back to camera mode. Then camera is stable. There were no issues with camera app in 1116 ROM. Anyway Panorama mode still shows visible disturbance.

Anyone else is also facing this issue to confirm?

Edited by anantk, 25 November 2012 - 06:41 PM.

[masterlud]

Can we make our TaskManager to look like samsung galaxy s2 or s3

[novoiperkele]

Thank you! - Kiitos!

[himoz]

reedo_17, on 25 November 2012 - 10:38 AM, said:

ive installed that and ive ticked mount as ext4 and rebooted but still the options are faded.

for me too but it works with ext2 formated

[reedo_17]

himoz, on 25 November 2012 - 08:55 PM, said:

for me too but it works with ext2 formated

ive done it now i partitioned my Sd

[huibuhh]

Installed the rom today. My experiences:
- wlan hardly reconnects after hot reboot or does not even try to. Then you have to go the settings and click 'connect' manually.
- 4.2 camera: camcorder and panorama initially showed glitches, panorama pictures weren't taken correctly but this somehow magically fixed after some time and some reboots. Then i crashed the camcorder by trying to test the quick motion option. As this option wasn't reset afterwards from now on i could not get the camcorder get to work again. Fingers off quick motion everyone!
- google voice search - no matter if started via widget or from app drawer - does not work. If i don't mix them up the none-google-now-version just opens a blank google search page after listening ends and the google-now-version gives an error message like "sorry, voice search has been quit". Any idea how to get it to work?

Apart from that i didn't notice any bugs. The UI is pretty smooth and everything seems to be doing fine. Having the 4.2 camera and gallery running on our blade definitely rocks. I'm loving it! Thanks to everyone involved for your hard work. Much appreciated!
I think having a release with 4.2 camera and keyboard nevertheless would be a good thing even though they are not included in CM10. But they do more good than harm...

KonstaT, does the final CM10 release mean that you stop development for the blade (personally i could understand a certain kind if tiredness after that long time and the always repeating questions in this thread) or do you plan to do some CM10.1 releases to keep track with the upcoming commits?

[keyboardshortcut]

Thanks Konstat and Ganster and everyone involved!

It is a privileged for us to use your ROM.
I've seen it growing from July to November!
Awesome work!

[elrond_bs]

I tested this ROM extensively for a week (both 18.11 & 24.11 versions) on my GEN2 European Blade. Tested most apps that I use (more than 150), games, etc. NOTE: Results could be different on different phones. Here's my review:

In short: the ROM is very fast, smooth and stable. Faster than GB and ICS.

Problems/bugs (not including those on page 1):
- (fixable) Home button (including on navigation bar), recent apps and lock screen doen't work (disabled) on fresh install.
   How to fix (thanks to Sulthekk) : Open Terminal Emulator, type "su", press enter on keyboard, select "Allow" when asked for SU permissions. Now type exactly this code:

sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name,value) VALUES ('device_provisioned','1');"

- (fixable) Camera preview for video - It is bugged. To fix it, flash Camera 4.2 ARM6 (by KonstaT) from here.
- Occasional picture distortion in Camera and Video players, not really a big problem. Usually fixed by rotating the phone or switching between apps.
- Autobrightness doesn't work correclty for me. I won't try to explain (too long), but it is the same in all Cyanogenmod ROMs (CM7, CM9, CM10). Works correctly in stock based ROMs (like SS-RLS7)
- Wifi usually doesn't reconnect after reboot and it is stuck on connecting. I don't even consider it a real problem. To fix it - turn off Wifi, then back on.
- Mpeg4 video playback is broken in last version (was OK in 18.11), H/W decoding is not working correctly with B-frames, S/W is bugged, slow and resizing doesn't work correctly. BUT, this is a work in progress by Ganster, I'm sure he'll fix it soon.

Games, Apps not working (correctly). NOTE: these apps are, most likely, not working on Jelly Bean (not because of the ROM)
- Assasin's Creed, Hero of Sparta, Gangster Miami - crash very frequently (once in a minute or so)
- Fling, Rise of Glory - problem with textures, not playable
- Asphalt 5 - reports SD card not available (but works in ICS, this is a know Jelly Bean bug for some older apps, if anyone knows a fix, please share)
- Daroon Player, CamScanner

Everything else works well (and I really put it through a lot during testing) - monumental achievement for KonstaT and the other devs!

Recommended tweaks for faster working ROM:
- Go to Settings->Performance. Select Processor and change CPU governor to SmartassV2, then enable "Set on boot". Go back 1 step and select I/O scheduler, change it to "sio" and enable "Set on boot"
- Go to Settings->Developer options: click on the OFF button in the upper right corner (it must be ON). Scroll down and find "Window animation scale", "Transition animation scale" and "Animator duration scale" and change them to ".5x".

Edited by elrond_bs, 26 November 2012 - 02:17 AM.

[flixblixclix]

still camcorder doesnt work on this rom but paranoid 2.60 made it work .....

[styrofoam]

hello guys,

Recommended tweaks for faster working ROM:

- Go to Settings->Performance. Select Processor and change CPU governor to SmartassV2, then enable "Set on boot". Go back 1 step and select I/O scheduler, change it to "sio" and enable "Set on boot"
- Go to Settings->Developer options: click on the OFF button in the upper right corner (it must be ON). Scroll down and find "Window animation scale", "Transition animation scale" and "Animator duration scale" and change them to ".5x".

@elrond bs: You wrote 5x or 0.5x? Because I tried 5x and this is very bad! lol! It should be 0.5x! Thanks for the settings!

Edited by styrofoam, 26 November 2012 - 08:03 AM.

[sugur]

There's a network connectivity problem on this rom, every time i install this rom and connect via 3g network the connection drops and freezes, needs to reboot every time .. removed this rom and installed ICS of KonstaKANG , theres no issue on that...any replies??

[Walwon]

KonstaT, on 24 November 2012 - 12:32 PM, said:

Final CM10 build.

cm-10-20121124-KonstaKANG-blade.zip

Thank you for your work, KonstaT!
Is this biuld final because you have a new phone or will you start developing a 10.1 ROM for the Blade?
I hope the latter is true. ;-)

[pppp3k]

elrond_bs, on 26 November 2012 - 01:29 AM, said:

I tested this ROM extensively for a week (both 18.11 & 24.11 versions) on my GEN2 European Blade. Tested most apps that I use (more than 150), games, etc. NOTE: Results could be different on different phones. Here's my review:

In short: the ROM is very fast, smooth and stable. Faster than GB and ICS.

Problems/bugs (not including those on page 1):

- Wifi usually doesn't reconnect after reboot and it is stuck on connecting. I don't even consider it a real problem. To fix it - turn off Wifi, then back on.
-\

I run 16.11 with Camera 4.2 ARM6 and HQ patch flashed manually. This combination has no problems with wi-fi reconnection.

[anantk]

pppp3k, on 26 November 2012 - 10:03 AM, said:

I run 16.11 with Camera 4.2 ARM6 and HQ patch flashed manually. This combination has no problems with wi-fi reconnection.

With the combination (16.11 with Camera 4.2 ARM6 and HQ patch), how is camera app behaving? Do you see visible disturbance while capturing pictures through normal camera mode? Whether panorma mode and Camcorder works properly without any visible disturbance while recording?

[uncle.uncle]

The ROM is running great but i can not find an UPNP app to work for my DLNA media player, nor my LG TV. Both apps can not find the media player or Tv. I have the same apps Bubble UPNP and LG remote on my tablet and they both work.

Any Ideas

Uncle

[Loki86]

it's possibile to add transparent notification area and circle battery mod like cm9?
by the way very great rom, thanks

[elrond_bs]

styrofoam, on 26 November 2012 - 07:53 AM, said:

hello guys,

Recommended tweaks for faster working ROM:

- Go to Settings->Performance. Select Processor and change CPU governor to SmartassV2, then enable "Set on boot". Go back 1 step and select I/O scheduler, change it to "sio" and enable "Set on boot"
- Go to Settings->Developer options: click on the OFF button in the upper right corner (it must be ON). Scroll down and find "Window animation scale", "Transition animation scale" and "Animator duration scale" and change them to ".5x".

@elrond bs: You wrote 5x or 0.5x? Because I tried 5x and this is very bad! lol! It should be 0.5x! Thanks for the settings!

I wrote it, as it is shown for EN-US language. With a point, meaning exactly 0.5x

[ziofaggio]

elrond_bs, on 26 November 2012 - 01:29 AM, said:

I tested this ROM extensively for a week (both 18.11 & 24.11 versions) on my GEN2 European Blade. Tested most apps that I use (more than 150), games, etc. NOTE: Results could be different on different phones. Here's my review:

In short: the ROM is very fast, smooth and stable. Faster than GB and ICS.

Problems/bugs (not including those on page 1):
- (fixable) Home button (including on navigation bar), recent apps and lock screen doen't work (disabled) on fresh install.
   How to fix (thanks to Sulthekk) : Open Terminal Emulator, type "su", press enter on keyboard, select "Allow" when asked for SU permissions. Now type exactly this code:

sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name,value) VALUES ('device_provisioned','1');"

- (fixable) Camera preview for video - It is bugged. To fix it, flash Camera 4.2 ARM6 (by KonstaT) from here.
- Occasional picture distortion in Camera and Video players, not really a big problem. Usually fixed by rotating the phone or switching between apps.
- Autobrightness doesn't work correclty for me. I won't try to explain (too long), but it is the same in all Cyanogenmod ROMs (CM7, CM9, CM10). Works correctly in stock based ROMs (like SS-RLS7)
- Wifi usually doesn't reconnect after reboot and it is stuck on connecting. I don't even consider it a real problem. To fix it - turn off Wifi, then back on.
- Mpeg4 video playback is broken in last version (was OK in 18.11), H/W decoding is not working correctly with B-frames, S/W is bugged, slow and resizing doesn't work correctly. BUT, this is a work in progress by Ganster, I'm sure he'll fix it soon.

Games, Apps not working (correctly). NOTE: these apps are, most likely, not working on Jelly Bean (not because of the ROM)
- Assasin's Creed, Hero of Sparta, Gangster Miami - crash very frequently (once in a minute or so)
- Fling, Rise of Glory - problem with textures, not playable
- Asphalt 5 - reports SD card not available (but works in ICS, this is a know Jelly Bean bug for some older apps, if anyone knows a fix, please share)
- Daroon Player, CamScanner

Everything else works well (and I really put it through a lot during testing) - monumental achievement for KonstaT and the other devs!

Recommended tweaks for faster working ROM:
- Go to Settings->Performance. Select Processor and change CPU governor to SmartassV2, then enable "Set on boot". Go back 1 step and select I/O scheduler, change it to "sio" and enable "Set on boot"
- Go to Settings->Developer options: click on the OFF button in the upper right corner (it must be ON). Scroll down and find "Window animation scale", "Transition animation scale" and "Animator duration scale" and change them to ".5x".

can the wifi reconnect problems be solved with the app "blade wifi fix"?
https://play.google....dewififix&hl=it

sorry for my english

[mrcake]

ziofaggio, on 26 November 2012 - 01:30 PM, said:

can the wifi reconnect problems be solved with the app "blade wifi fix"?
https://play.google....dewififix&hl=it

sorry for my english

No

sugur, on 26 November 2012 - 08:26 AM, said:

There's a network connectivity problem on this rom, every time i install this rom and connect via 3g network the connection drops and freezes, needs to reboot every time .. removed this rom and installed ICS of KonstaKANG , theres no issue on that...any replies??

Yes, read the first paragraph of the OP.

KonstaT, on 17 July 2012 - 10:10 AM, said:

This is my work in progress port of CyanogenMod 10 for ZTE Blade. This ROM is mainly for developers/testers/advanced users - people who are aware that this ROM is still under development. I'm really not interested in hearing whining about non-working things (and questions when they will be fixed), instead your ideas/input on the remaining issues is welcome. Sources and instructions are available in the second post for you to build CM10 yourself.

WiiSky70, on 24 November 2012 - 01:34 PM, said:

- Update support for those users running Android 4.0.4 (CM9)

I updated from KonstaT's CM9 rom to this without any problems or losing of data and apps, only had to wipe cache and sytem.

Edited by mrcake, 26 November 2012 - 04:05 PM.