3143 replies to this topic

[elrond_bs]

There's a working link for TPT with 160MB system here. That should do it.

Edited by elrond_bs, 16 December 2012 - 11:11 PM.

[mio180]

Okey gogggle is our friend so I checked the TPT helper site offline and downloaded Gen3-v2a.zip.
Fine. "Turn your phone off and take the battery out. Put the battery back in and power on holding the vol+ and menu buttons.
You should see green text appear on the screen, then once its finished you should boot into Clockwork recovery."
"Vol+" + "Power" is not enough. I tested with two cards. "Vol+" + "Menu" + "Power" is the solution and a minute battery out
Super, I have Play Store now but cannot use as phone because it does not find mobile network!
OMG!
:oHelp please...

[De@n]

mio180, on 16 December 2012 - 11:41 PM, said:

Okey gogggle is our friend so I checked the TPT helper site offline and downloaded Gen3-v2a.zip.
Fine. "Turn your phone off and take the battery out. Put the battery back in and power on holding the vol+ and menu buttons.
You should see green text appear on the screen, then once its finished you should boot into Clockwork recovery."
"Vol+" + "Power" is not enough. I tested with two cards. "Vol+" + "Menu" + "Power" is the solution and a minute battery out
Super, I have Play Store now but cannot use as phone because it does not find mobile network!
OMG!
:oHelp please...

Your phone is gen3?

[mio180]

I found this here (#1990358)
this: "su chmod 777 /data/radio/* && chown radio.radio /data/radio/*"
But getting "unknown id: chmod"
:huh:pffff.

[mio180]

De@n, on 17 December 2012 - 12:02 AM, said:

Your phone is gen3?

Well, I do not know what is it now ...but was gen2 before.

[mio180]

elrond_bs, on 16 December 2012 - 11:10 PM, said:

There's a working link for TPT with 160MB system here. That should do it.

I was faster... ohh, sh*t!
Is it bricked or can I reTPT with your linked one?

[Snap.IT]

mio180, on 17 December 2012 - 12:51 AM, said:

I was faster... ohh, sh*t!
Is it bricked or can I reTPT with your linked one?

You can downgrade gen2 updated to gen3 with a gen2 TPT.

[Snap.IT]

Mettafox, on 16 December 2012 - 09:53 PM, said:

I move all options, Applications, Private Applications, Dalvik Cache, less Application Data, because causes instability.
Is secure move Application Data with all options selected?

Yes. There is nothing that would cause instability OR make it less secure. Whoever told you that is wrong.

[mio180]

Snap.IT, on 17 December 2012 - 01:40 AM, said:

You can downgrade gen2 updated to gen3 with a gen2 TPT.

Thank you! As being pretty upset I did it before your post not knowing that I made a better brick or worse.
I used the Gen2-v2a2.zip from the official site of tpt but:
1. the checksum did not matched
2. after the green line gone to 100% a small text appeared "error" but it said "~finished successfully"

Looks like everything is working well now except for:
- the Google Now what collapses without FC... (???)
- and there is some DLNA / UPnP error bubbleUPnP or similar apps do not see the network and close
(Es File Explorer discovered the network and no problem logging in)

[dhoomktoo1]

I am using exdialer as my default dialer. Dialing works fine but I am not able to find original cm dialer in the launcher app drawer. although I can see the phone.apk in settings - manage apps but not able to start default dialer.. Wonder if anyone can help me to get it back into my app drawee

[mio180]

Oh, it is a shame that I posted as a silly kid. Now I read back over 50 pages and realized that 5 pages back would have been good enough for most of my problem.
But as always... an updated list style issue menu at the topic sidebar would be perfect!
:oDLNA / UPnP still does not work - I hope that it is just a bug what can be solved while it was working well with 2.3!

[elrond_bs]

@Mio180: if the checksum didn't match why do you install? That means it is not downloaded/moved correctly. And why not using my link for Gen2 160mb system v10 custom?

Wipe everything and install again. But be more careful.

@ dhoomktoo1: Default dialer should be in the drawer, so it is a serious problem. If your system is 160MB or more, wipe and install again. If not, use the TPT from the link above.

Edited by elrond_bs, 17 December 2012 - 05:12 PM.

[mio180]

Hi elrond_bs,
I downloaded (mine) several times but getting each time the exactly same chksum what was still different the one seen on the site.
It is working perfect (of course it has bad cam, no google voice, and some known bug or issue)
Felt too late when I downloaded what you linked and I was pretty tired when realized it is not jut an *.img but a bunch of file.
I found that a too hard job without tpt helper...
OK. I go and use your linked image if you promise it has DLNA support
What else can be better if I start it again?
Thank you!

[96frozen]

bump

[Snap.IT]

elrond_bs, on 17 December 2012 - 05:11 PM, said:

@Mio180: if the checksum didn't match why do you install? That means it is not downloaded/moved correctly. And why not using my link for Gen2 160mb system v10 custom?

Wipe everything and install again. But be more careful.

@ dhoomktoo1: Default dialer should be in the drawer, so it is a serious problem. If your system is 160MB or more, wipe and install again. If not, use the TPT from the link above.

If you change the standard dialer into another dialer then that dialer will start by default.

To get back to the standard dialer enter settings -> apps click your installed dialer (exdialer) and clear it's setting as standard dialer.

[elrond_bs]

Yes, but his dialer doesn't show in app drawer. Even if you install 5 other dialers, the stock one is still there (except, if you deliberately hide it).

[Snap.IT]

elrond_bs, on 17 December 2012 - 09:20 PM, said:

Yes, but his dialer doesn't show in app drawer. Even if you install 5 other dialers, the stock one is still there (except, if you deliberately hide it).

It's much more likely that something changed after the installation of exdialer since it changed after that. If you use a theme with icons the icon for dialer that used to open the JB dialer will open exdialer instead if it's selected as default dialer.

It's not like the dialer magically dissapeared. It's still there.

[bloobzor]

Hi, i haven't been following the blade scene in a while, I still use swedish snow RLS7 on a blade that used to be a gen 1 (updated it to 2 by using the ss RLS7 TPT)
Now I want to install this rom but I am a bit confused on how I have to do it


1. run gen1 to gen2 V10a by using TPThelper
2. turn off phone, power back on by holding volume+ and menu button
3.in clockwork flash the rom
4. install gabbs
5. done

Is this correct? Where do I place the actual rom on my sdcard so iI can find it in clockwork?
Also I keep reading that 16.11 (i think?) is the best version of this rom, I never use youtube on my phone, should I use this version?

Sorry for these stupid questions.

Edited by bloobzor, 18 December 2012 - 12:43 AM.

[dhoomktoo1]

Snap...I have already tried clearing the defaults for exdialer. But still not able to get back the default dialer. As you rightly said ..it must be there since the calling is working all right ..but I just can't seem to find it in the app drawer. Phone.apk is there in system / app folder. Can also see the it in settings / manage app. Just can't seem to find a way to start the default dialer...weird

EDIT : took a nandroid backup and reinstalled the ROM on top with out any wipes. Dialer back in app drawer and works likes a charm. Thanks for all your help.

Edited by dhoomktoo1, 18 December 2012 - 11:28 AM.

[jonmac73]

bloobzor, on 18 December 2012 - 12:02 AM, said:

Hi, i haven't been following the blade scene in a while, I still use swedish snow RLS7 on a blade that used to be a gen 1 (updated it to 2 by using the ss RLS7 TPT)
Now I want to install this rom but I am a bit confused on how I have to do it


1. run gen1 to gen2 V10a by using TPThelper
2. turn off phone, power back on by holding volume+ and menu button
3.in clockwork flash the rom
4. install gabbs
5. done

Is this correct? Where do I place the actual rom on my sdcard so iI can find it in clockwork?
Also I keep reading that 16.11 (i think?) is the best version of this rom, I never use youtube on my phone, should I use this version?

Sorry for these stupid questions.

sounds fine, although full CWM backup first & format/wipe before starting, but TPT will do that anyway.
I came from SS too, so many more usability features and not much performance drop. I used 1611 after reading on here - not tried latest so can't comment but everything works that I need so am happy.