Jump to content

Official image.bin for idea blade!!!!( STOCK ROM TPT FROM ZTE)


Guest alfu

Recommended Posts

hi,

I almost bricked my idea blade and for last two days I was Googling and experimenting several methods. but neither my phone support fastboot nor ftm mode. I tried maldovian image.bin, China unicorm tot, none succeeded. then just before 6 hours I found a thread in cyanogenmod forum, (indeed, they have a good idea blade forum) link to the official image.bin. SPECIAL THANKS GOES TO r-athale FOR HIS INFO.

the forum : forum.cyanogenmod.com/topic/49652-idea-zte-blade-india/#entry335808

link to image.bin: wwwen.zte.com.cn/endata/mobile/India/India_SoftWare/201205/P020120521626244417125.zip

WARNING! !!

ONLY FOR IDEA BLADE

READ THE PDF FILE IN THE ZIP CAREFULLY

INSTRUCTION :

flash it just like any other tot

download the zip

extract it

create a folder named 'image' in the root of your SD card

copy the image.bin file in the extracted folder to image folder

better you just format sdcard before copying

now remove battery of blade

reinsert after a while

hold down power on key+volume up key+menu button (not home button) together

now you should see black screen showing "updating from t-flash card" in green text

if not repeat procedure again

done, you will now be booted with idea blade stock firmware

would be helpful to reclaim warranty and save bricked phone.

Link to comment
Share on other sites

  • 3 weeks later...
Guest jonyblaze1

hi,

i have idea blade more thane 6 month.currently running on mmhmp-rsl9,i hav tried image.bin but it just giving error on updating, so please help if u hav any solution!!!!

Link to comment
Share on other sites

Guest jerrin

hi,

i have idea blade more thane 6 month.currently running on mmhmp-rsl9,i hav tried image.bin but it just giving error on updating, so please help if u hav any solution!!!!

could you post the error, it would be helpful

Edited by jerrin
Link to comment
Share on other sites

hi,

i have idea blade more thane 6 month.currently running on mmhmp-rsl9,i hav tried image.bin but it just giving error on updating, so please help if u hav any solution!!!!

ok, that means ur phone finds it wrong tpt . now try this, first check your Gen and make sure that it is gen2. if it is gen2 then try installing any cyanogenmod based rom like joyos or Lezo rom or stock cyanogenmod Kang's from burgers etc,(preferably Chinese based v880 rom).then try image.bin, this might work, I don't know exactly. btw mmhmp is a stock zte Libra based rom. it also got a image.bin. it might changed phone's Gen or baseband or blah blah blah..

Link to comment
Share on other sites

hi,

i have idea blade more thane 6 month.currently running on mmhmp-rsl9,i hav tried image.bin but it just giving error on updating, so please help if u hav any solution!!!!

sorry double post ...

Edited by alfu
Link to comment
Share on other sites

  • 2 weeks later...
Guest coolfox

...

link to image.bin: wwwen.zte.com.cn/endata/mobile/India/India_SoftWare/201205/P020120521626244417125.zip

...

I confirm that this software, takes Idea-Blade to stock firmware without rooting and recovery.

When the link was visible on ZTE's site, I had done this thinking that it's Android 2.3 stock firmware from Idea.

Proved wrong, then again rooted the phone and installed CM 7.2.

Link to comment
Share on other sites

Guest jonyblaze1

hi alfu,

i hav tried your step but it continue to get error from upgrading from sd card,so then i tried Moldova libra T card upgrading and now phone not taking startup pls help

Link to comment
Share on other sites

Guest android@sam

hi alfu,

i hav tried your step but it continue to get error from upgrading from sd card,so then i tried Moldova libra T card upgrading and now phone not taking startup pls help

First flash the stock gen2 tpt from below link and then try to install the stock firmware. I thing it should work.

http://www.mediafire.com/?9civd2253kvct99

Edited by android@sam
Link to comment
Share on other sites

Guest jonyblaze1

i am stuck in clockworkmod recovery v5.0.2.0.every time i finish installation zip fron sd card and reboot it come back into clockword recovery again,pls help...

Edited by jonyblaze1
Link to comment
Share on other sites

  • 1 year later...
  • 1 year later...

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.