436 replies to this topic

[borisgregoris]

After using for a few months a stable ICS ROM, I decided to do the update for the JB.

I was very excited about this release. It's very fast and smooth.

But now after sync to my google account, I have trouble doing whatever. When I turn on the connections, either through 3G or Wifi, the mobile becomes extremely slow.

The transfer rate was very slow and comes to a halt in downloads, through Google Play, or simply to synchronize contacts. Slow to the point of not transferring some photos of contacts.

I'm using S2E, but from what I've read on this forum, nobody had problems with this program. And this only happens if I turn on the connectivity.

I've flashed this ROM several times, and the symptoms are always the same.

And of course I've follow the instructions. As usual, I did Wipe Data / Factory Reset, Wipe Cache, Format System, Wipe Dalvik and Cache.

My only hope now is that someone can help me overcome this problem, because I have no more ideas.

Thank you all.

[DrPaua]

borisgregoris, on 19 November 2012 - 03:38 PM, said:

[...]
I'm using S2E, but from what I've read on this forum, nobody had problems with this program. And this only happens if I turn on the connectivity.
[...]

I've had completely different problems with S2E, but this helped for me: http://www.modaco.co...00#entry2031634

[RaAmon]

ZeeLog, can you see your PM?  I'm not sure to be doing well to send you personal messages...  I have sent you a couple and I am not sure if I have done well and you can see them ... :-S

[borisgregoris]

borisgregoris, on 19 November 2012 - 03:38 PM, said:

After using for a few months a stable ICS ROM, I decided to do the update for the JB.

I was very excited about this release. It's very fast and smooth.

But now after sync to my google account, I have trouble doing whatever. When I turn on the connections, either through 3G or Wifi, the mobile becomes extremely slow.

The transfer rate was very slow and comes to a halt in downloads, through Google Play, or simply to synchronize contacts. Slow to the point of not transferring some photos of contacts.

I'm using S2E, but from what I've read on this forum, nobody had problems with this program. And this only happens if I turn on the connectivity.

I've flashed this ROM several times, and the symptoms are always the same.

And of course I've follow the instructions. As usual, I did Wipe Data / Factory Reset, Wipe Cache, Format System, Wipe Dalvik and Cache.

My only hope now is that someone can help me overcome this problem, because I have no more ideas.

Thank you all.

RESOLVED!

Just replaced the sd-card yesterday night, and now i have the faster ROM that my Blade ever seen.

[razzmataz1478]

ZeeLog, when you build for skate what device config do you use?

[RaAmon]

Very nice build for ZTE Skate!   Fantastic implementation of PA/JB!

Boots fast, network fast too, nice sensitivity and response... With full functionality (within the limitations already known and general JB in Skate) implements 4.1.2 with KonstaKANG Gapps updated and all fits into a /system of 170 MB!  The paranoid 2.5.5 shows significant developments in the customization of the UI for each application. Very, very powerful. Interesting options for settings too. In all, excelent build for Skate, near perfect for all day use.

For if you conceive, you advancement that has some small minor fault:

1) After start the phone, just when shows the lock screen, there is some graphical glitches, and specular image for aprox. 2 secs

2) Camera: mainly ok, but some vertical banding just in the moment of press the shutter; the preview acceptable (some stairs/jumps); the result (photo captured) its ok. Panorama mode has too much graphical interferences (checksboard effect) and its difficult compose a panorama; the preview no helps whatsoever. Video capturing: acceptable too, but a bit of jumps and stairs recorded when the camera moves; the result captured its acceptable too, but not fine (stairs, micro jumps...).

3) Gallery -> Settings => black screen, no options for adjustement

4) Lock Screen -> from lock screen, to prees lock button again, no darks instantaneous; make a "flash" with the lock screen

5) StatusBar -> toggle for 2G/3G & data doesn't seems work ok

6) StatusBar -> lose some interesting configuration options presents in ZeeLog previous versions and another builds of PA/JB from Tilal and C3C0

Would be nice implement in JB the solution founded by C3C0 for enable native Wifi tethering in ICS for Skate ( http://www.modaco.co...2/page__st__800 )

Thank you very much for your incredible work ! and sorry for the Babylon-tanslated english   :-)

[zeelog]

razzmataz1478, on 23 November 2012 - 04:29 PM, said:

ZeeLog, when you build for skate what device config do you use?

for both builds I used coldfusionx device config

RaAmon, on 24 November 2012 - 05:57 PM, said:

Very nice build for ZTE Skate!   Fantastic implementation of PA/JB!

Boots fast, network fast too, nice sensitivity and response... With full functionality (within the limitations already known and general JB in Skate) implements 4.1.2 with KonstaKANG Gapps updated and all fits into a /system of 170 MB!  The paranoid 2.5.5 shows significant developments in the customization of the UI for each application. Very, very powerful. Interesting options for settings too. In all, excelent build for Skate, near perfect for all day use.

For if you conceive, you advancement that has some small minor fault:

1) After start the phone, just when shows the lock screen, there is some graphical glitches, and specular image for aprox. 2 secs

2) Camera: mainly ok, but some vertical banding just in the moment of press the shutter; the preview acceptable (some stairs/jumps); the result (photo captured) its ok. Panorama mode has too much graphical interferences (checksboard effect) and its difficult compose a panorama; the preview no helps whatsoever. Video capturing: acceptable too, but a bit of jumps and stairs recorded when the camera moves; the result captured its acceptable too, but not fine (stairs, micro jumps...).

3) Gallery -> Settings => black screen, no options for adjustement

4) Lock Screen -> from lock screen, to prees lock button again, no darks instantaneous; make a "flash" with the lock screen

5) StatusBar -> toggle for 2G/3G & data doesn't seems work ok

6) StatusBar -> lose some interesting configuration options presents in ZeeLog previous versions and another builds of PA/JB from Tilal and C3C0

Would be nice implement in JB the solution founded by C3C0 for enable native Wifi tethering in ICS for Skate ( http://www.modaco.co...2/page__st__800 )

Thank you very much for your incredible work ! and sorry for the Babylon-tanslated english   :-)

many thanks for your feedback

New release up pa_blade:

LATEST DOWNLOAD:

Version 2.6.0 ROM: http://goo.im/devs/z...2012-150614.zip

CHANGELOG:

Fixed video hw decoding playback (youtube hq support)

video playback improvements (credit Ganster, KonstaT)

[NxtStep]

Great update zeelog, many thanks! YouTube HQ works fine for me, although video playback is still laggy. (Tried it with bsplayer and mx player with a 720p video, it might be too much.)

Are you planning to build PA based on AOSP 4.2 in the future? (I don't really know whether it is yet possible to build 4.2 for our blade.) The PA team announced that they are maintaining the CM-based source as well, are you going to build from these sources any longer?

Edited by NxtStep, 25 November 2012 - 08:04 PM.

[emotty]

zeelog, on 25 November 2012 - 03:46 PM, said:

New release up pa_blade:

Cheers downloading now

[Dragos Ret]

Well i have some questions to make nothing major, about running and hardware probs , but there is some s*** that really pisses me off, i don't know if that's about haveing too many apps or s***, but every time i restart my device, i need to re-install some of the old apps , it gives me the low memory error, and then apps begin to stop responding, i re-install them and everything it's ok untill i restart it again, i use link2sd , app2sd and all that crap to improove my space management, but i am allways with this problem . can you help me about what can i do to stop this?

[flixblixclix]

good job.... camera and camcorder works brilliantly...... and also very smooth interface......

[HDuser]

I really appriciate your effords, Please dont mind my silly request i was thinking if you could add permission manager and Gaurd Provider?

[DrPaua]

Dragos Ret, on 26 November 2012 - 01:41 AM, said:

Well i have some questions to make nothing major, about running and hardware probs , but there is some s*** that really pisses me off, i don't know if that's about haveing too many apps or s***, but every time i restart my device, i need to re-install some of the old apps , it gives me the low memory error, and then apps begin to stop responding, i re-install them and everything it's ok untill i restart it again, i use link2sd , app2sd and all that crap to improove my space management, but i am allways with this problem . can you help me about what can i do to stop this?

use only the built-in S2E or, if that doesn't work, install it from here: http://www.modaco.co...00#entry2031634
i think it's possible that two or more of them work against each other like two anti-virus-programs on your pc

[RaAmon]

ZeeLog, please, when you consider that the developments are significant, you should be grateful if you will carry out a compilation for Skate.  Currently continued using your 2.5.5_18NOV2012 and except the small defects listed in my previous post, it works superbly. The most uncomfortable, for me, is the fault of the 2g/ 3g switch in the notification bar ... Does that works well in the Blade??

Thank you very much.

[blader95]

Ftw new update has battery drainage both on screen and standby

[birdibird]

No drainage here.
2.6.0 is an amazing update! Never felt so smooth and youtube HQ works!
Amazing work!!
credits to all who contributed to the making of this great rom

only panorama still needs some work I figure
edit: actually it works, just needed some time
(using camera 4.2)

Edited by birdibird, 27 November 2012 - 11:46 AM.

[reedo_17]

So is whats better this rom or KonstaT's rom?

[eloimuns]

Hi guys and Zeelog,
can you do a new build for Skate please



You're doing a great project in blade! Please port in skate.
Thanks

[flixblixclix]

reedo_17, on 26 November 2012 - 08:40 PM, said:

So is whats better this rom or KonstaT's rom?

obviously this rom is much smoother and fast when compared to other JB rom... btw comparing dev efforts s not a good habit.....

Edited by flixblixclix, 27 November 2012 - 05:12 PM.

[emotty]

reedo_17, on 26 November 2012 - 08:40 PM, said:

So is whats better this rom or KonstaT's rom?

Its not better its different


Try it