Bits to take note of are
rickywyatt, on 23 July 2012 - 09:22 AM, said:
hi as you read iv flashed my osd with the xolo update all is working eg camera wifi internet wifi bluetooth
as always if you follow this guide you do as your own risk i or modaco will not take responsibility if you brick your phone
----------------------------------------------------------------------------------------------------------------------------------------------------
step (1)is to download the update here is the link
http://www.xolo.in/s...iles/update.zip
step (2) is to use winrar or 7zip to open the update and you will see a file called recovery.bin extreact it to desktop
step (3) is to download flasher from my post
step (4) next extract flasher folder form flasher.zip and move to c:/
sped (5) is to move recovery.bin to flasher folder
step (6) is to move the update.zip flasher folder
step (7) is to open the flasher and select an option
step (8) is to go into setting and reset phone only if flashing xolo update
jikobutsu, on 23 July 2012 - 03:55 PM, said:
You need to be in fastboot mode to flash the recovery, that is why you get waiting for device, because either you are trying to flash recovery from booted device or adb drivers are not installed:
http://api.viglink.c..._10639388059031
rickywyatt, on 07 August 2012 - 11:15 PM, said:
connect phone to pc and mount the sdcard move the update.zip to the root of you sdcard.
then turn off phone hold vol - hold the power button untill you see the boot screen.
it will boot into fastboot then connect to pc click the flasher. bat it will begin to flash once done let phone boot once
if it dint reboot hold power button.
then shut phone down this time hold the vol+ and then hold the power button untill you see the boot screen then let go of power it will boot into recovery.
next move with vol -+ so press vol - and highlight the one that says update from sdcard
then tap the camera then highlight the one that says update.zip then tap the camera it will install the update one done let the phone boot then reset from setting
The flasher.bat is now called flasher logo.bat and you need to select option 1.
Ensure you disable any firewewall programs when you run the flash logo.bat
When running the flash logo.bat it is working even though it appears nothing is happening on the screen- so be patient, don't kill the program.
When doing the second part of holding the power and vol+ it when to the same screen as power and vol-. When at the recovery screen i pressed and held power and vol+ and it when into the screen that allowed you to install the update.zip it talks about.
Hope this is of some help
Edited by aty, 06 October 2012 - 10:39 AM.