48 replies to this topic

[Pablo87]

J, on 11 November 2012 - 10:26 PM, said:

What class sd card recommended for this? Class 4 is sufficient or speed writing / reading is too low?

Use class 10. Class 4 is just too slow.

[creedence]

Viento del Sur, on 11 November 2012 - 09:37 PM, said:

Int2ext + is faster than int2ext, because it leaves /data/data in the internal memory... It has been well tested in HTCMania Spanish forum.

Goes great with all CM's. With the H3's occur certain problems (installation and/or signal radio).

Goes great with EXT partition to 1g. More than 1g. mobile slows ...

Thank you for feedback. I think that you're right.

[creedence]

J, on 11 November 2012 - 10:26 PM, said:

What class sd card recommended for this? Class 4 is sufficient or speed writing / reading is too low?

With class 4 you will get bad performance. 8 or 10

[J'suii Jà mà i Là a]

I spend reading of 4.2 MB to 6 MB read and 15 mb reading 20mbs with use SD Speed Increase , no sufficient ?

[creedence]

It's enough. But if too slow, then flash the rom again without wipe and without a script. So you re-size the normal memory.

[triharas]

creedence, on 10 November 2012 - 02:18 PM, said:

I found a script.So you can increase the internal memory up to 2GB.

Many, many thanks to XDA TEAM.The "thank you" goes to croniccorey.Great work.

http://forum.xda-dev...d.php?t=1716124

I tested it: CM7,CM9,XF2 stable,XF2 nightly

When something new comes, I prefer a clean installation.

My method:  rom zip--unzip
int2ext--unzip
copy 40intext script
open nightly
system-->etc-->init.d-->paste 40intext
Create nightly zip
Recovery-->full wipe
Install zip from sd card(with script)
Do not forget:mount & storage -> format sdext
Do not forget: mount & storage -> mount sdext
Reboot-->Not scare, it takes long.
Enjoy
But there are several methods.Please read XDA thread.



Pictures:









2012-11-07 22.12.38.png
2012-11-08 17.42.59.png
2012-11-10 03.47.14.png
2012-11-10 03.47.32.png

I'm asking for feedback!We can help each other. Please test first and then criticize.

how long it takes to bootup. i have it 4 hours now stuck to the cyanogenmod bootscreen

[Mohamed Atiea]

I am on class 4 and 2GB partition and dont have a problem (PA C3C0), may be I didn't know how fast it will be on Class 8 or 10

[creedence]

Mohamed Atiea, on 13 November 2012 - 11:38 AM, said:

I am on class 4 and 2GB partition and dont have a problem (PA C3C0), may be I didn't know how fast it will be on Class 8 or 10

That's a good message. Thanks

[creedence]

triharas, on 13 November 2012 - 11:34 AM, said:

how long it takes to bootup. i have it 4 hours now stuck to the cyanogenmod bootscreen

It takes about 5 minutes.Something has gone wrong.
Have you partitioned correctly?Have you done full wipe?
Do wipe cache and dalvik cache.Reboot.
Please write some more!

Edited by creedence, 13 November 2012 - 01:44 PM.

[MiguelG]

I just installed the INT2EXT+ and it's much better then Link2SD.
My ext-sd partition is 1G and I never had so many apps at the same time

Thanks Creedence for pointing out this post on XDA!

On another note, I'm using C3CO Paranoid ROM and installed this script after several days using this ROM. I just followed the steps on the XDA post and BUM! 1G just for apps

[aamiel]

I have installed this on CFX2 and it is great with 1GB. I tried int2ext but found it quite laggy. int2ext+ is very smooth and the advantage over link2sd or S2E is that you don't have to worry about anything or set up anything.
I installed it by flashing, not playing with the zip files.
Now I will need to find out how to update a ROM without messing anything up. I guess I will have to then play with zip files or maybe just flash it again on top of the newly flashed ROM.

Thanks for the heads up. I really enjoy this way of doing things.

[creedence]

MiguelG, on 17 November 2012 - 01:25 AM, said:

I just installed the INT2EXT+ and it's much better then Link2SD.
My ext-sd partition is 1G and I never had so many apps at the same time

Thanks Creedence for pointing out this post on XDA!

On another note, I'm using C3CO Paranoid ROM and installed this script after several days using this ROM. I just followed the steps on the XDA post and BUM! 1G just for apps

So, it works without reinstalling. Thank you. Yippi!  

[creedence]

aamiel, on 17 November 2012 - 11:32 AM, said:

I have installed this on CFX2 and it is great with 1GB. I tried int2ext but found it quite laggy. int2ext+ is very smooth and the advantage over link2sd or S2E is that you don't have to worry about anything or set up anything.
I installed it by flashing, not playing with the zip files.
Now I will need to find out how to update a ROM without messing anything up. I guess I will have to then play with zip files or maybe just flash it again on top of the newly flashed ROM.

Thanks for the heads up. I really enjoy this way of doing things.

You can also just flash the zip in recovery. But then you have to mount the sd ext. Mount & storage - mount sdext. Thanks

[satanovsyn]

creedence, on 10 November 2012 - 03:01 PM, said:

Link2sd delete absolutely!This should not be in there in rom. This script may not be combined with link2sd.

Why? You tried it?

[creedence]

satanovsyn, on 22 November 2012 - 02:30 PM, said:

Why? You tried it?

I tried it. are two different scripts.
and also, if you have 1 GB of internal memory, for what you need link2sd?

Edited by creedence, 23 November 2012 - 02:06 PM.

[silva87]

I guys

can anyone explaine pace by pace increase the internal memory.. i have the android cyanogenmod 4.1.2 from paranoid
i´ve tried and the internal memory stays the same...
Can you help please

Edited by silva87, 08 February 2013 - 11:04 AM.

[jopsi332]

on cfx3 not working :C than go back to cfx2

[jopsi332]

why i cant flash gapps from tilal when i done this?
ext 500mb 32mb swap   8gb class6 microsd

[Olig16]

when i reach the step:
Do not forget:mount & storage -> format sdext
Do not forget: mount & storage -> mount sdext
I get an error message:
Error formatting sdext and also error mounting sdext.

[mrvlhs]

So if you do this you need to fresh install, correct? No other way?