ClockWorkMod 220.127.116.11 by Lucky76
Acer Liquid Gallant Duo E350
PLEASE READ BEFORE CONTINUING CAREFULLY FOLLOWING LINES. THANKS
WARNING As always do not take any responsibility for any of your brick * Gallant Duo E350 Acer Liquid, then these steps at your own risk, and please be sure to perform them only after you understand what you do and you understand the meaning.
Any operating errors could affect the use of your smartphone forcing you to send it in for repair in service.
Flashing is a dangerous action and should be done very carefully.
This is Porting of the famous Recovery mod to version 18.104.22.168 beta for our device. Should be functional enough and if you notice bugs please report here so I'll try to fix.
Then you will see the installation guide that is identical to that of the root and at the bottom of this post the link to the complete package of PaulOBrien including recovery of my mod.
Big Thanks to Bruno Martins have compiled this Recovery from cyano 10.1 source and i have ported for us device Acer Liquid Gallant Duo.
1. If you already have done the Root of your Gallant duo continued with the guide below.
2. If you have not done the Root of your Gallant duo passed through the post from Root and follow the guide then return to this.
Installation Guide ClockworkMod
Tips Pre Flash
1. Having your own device with charge battery to 100%
2. Please read the guide below can be at least a couple of times prior to start.
Follow the step by step guide below:
1. Have necessarily like the Windows operating system (tested by me with win 7 64 bit)
2. Download the pack with the tools in the link below
3. Unzip the zip file you just downloaded to a directory on your PC.
4. Turn off your Duo Gallant and remove the battery
5. Connect your Gallant Duo to your PC via USB cable
6. The Gallant will not be recognized so you'll have to manually install the drivers in the zip file you downloaded and depending on your operating system (XP, Vista, 7).
7. Once you have installed the usb drivers properly you can run the program for the Flash file via the "flash_tools.exe." Good start it as an administrator with the right mouse button.
8. You will see the first line of the program Flash Tools "Download Agent" automatically compiled.
9. Disconnect the USB cable from your Gallant Duo and keep it without a battery.
10. Now you have to upload the file "MT6575_android_scatter_emmc.duo.modaco.txt" created by PaulOBrien and you'll have to click on the button to the left "Scatter-loading."
11. When you will open the window of Windows find this file in the folder going to scatter. Select file MT6575_android_scatter_emmc.duo.modaco.txt.
12. Now you have to choose what to Flashing. On the bottom window you will see many writings and in this case the Root you check the box next to the word RECOVERY.
13. After clicking within the area corresponding to the RECOVERY need to click just above the word RECOVERY.
14. We will open a new window in Windows and in this case you get inside the Images folder where you will find two files.
15. Now to install the ClockworkMod 22.214.171.124 you must click on the file cwm126.96.36.199.lucky76_1.img.
16. At this point you are ready to file the new Flashing the ClockworkMod recovery 188.8.131.52.
WARNING I remind you that you do this to flash your own risk. Flashing is dangerous and could result in an unusable vosto Device. So if you have it all figured out and you are sure and aware of what you're doing, continue with the steps below .......
17. To get started you will need the Flash at this point click on Download.
18. You will come out a dialog warning / alert with the yellow triangle and black exclamation mark telling you not all the images have been properly loaded .... etc..
19. Click on Yes
20. Hook up your Gallant Duo to your PC via the USB cable within a few seconds.
21. You'll see a line starting at the bottom gradually followed by a Red and Yellow and finally there will come a window with a Green Circle Square on side written Download OK.
22. Flash the new ClockworkMod recovery 184.108.40.206 is over/end.
23. Disconnect the USB cable from the Duo Gallant and replace the battery in the device.
24. Now before restarting usually have to go into recovery mode
25. To enter recovery mode you have to press and hold Vol + (up) and Power on the device with the Power button (starting of the engine). Hold down both buttons until you see from the new Recovery. Now you can release the Vol + and Power.
26. With the volume keys you can get on and off in the options of the new recovery. With the Power Button can confirm your choices in the various menus.
27. To restart go to the written reboot system now (System Reboot) ---> To select this option press the Power button as mentioned.
28. Wait Rebooting the System.
29. If you want to enter in Recovery when the phone is on I recommend use app Quick Boot.
Link Download Fully Pack R2 with tool and file Scatter. -----> Here
md5 ---> 4a055ab7ab0ff9d51647c77961886fbc
Link Download only File Immagine of Recovery Clockworkmod ---> Here
md5 ---> 30022fcc55440c784bae7746f5a8f6fb
Link Download only File Imagine of Recovery 220.127.116.11 ---> Here
md5 ---> 552346dca388cb2993546a5295dd55d5
Link Download ZIP Flash Recovery 18.104.22.168 Normal -----> Here
md5 ---> cdf297dfde3c082d71cd80545dacSPAM
If you have installed 22.214.171.124 Recovery you can flash this .zip file into it.
Big Thanks to Bruno Martins have compiled this Recovery from cyano 10.1 source and i have ported for us device Gallant Duo.
PaulOBrien -----> Root and pack R1
Clockworkmod -----> For their recoverymod ----> Koush Dutta
Bruno Martins ----> Base 126.96.36.199 for Devices MTK 6575/77
Lucky76 ----> Porting for Acer Liquid Gallant Duo and Acer Z110
Tuttoandroid.net -----> For all my post ----> Here
Edited by lucky76, 09 February 2013 - 10:34 PM.