10 replies to this topic

[luunatiq]

i did a bad thing, i've done 3 steps
1. i was on stock gb non branded b893 and i wanted to root and install infusion so first i followed this http://huaweig300.co...he-huawei-g300/ ..all ok
2. then i installed cwm from this http://www.modaco.co...-mac-and-linux/ ...again all ok,  i entered cwm all was fine
3. but then when i tried to make a gingerbread backup id didn't work so i thaught i had to unlock bootloader so i applied BootloaderG300.exe. from http://huaweig300.co...rkmod-recovery/
and now my phone is entering boot logo and restarting ..like a bootloop

if i press volume up + power still bootloop
volume down + power ..bootloop,
have i bricked it? please help..i know i was a fool messing with all of this so please help

[kyan31]

Wait, so did you apply the bootloader unlock on a gingerbread ROM, or ICS?

[luunatiq]

on a gingerbread rom, b893

[kyan31]

Why would you do that

Gingerbread isn't locked to start with. I'm sorry, bit there is probably a high chance that you now have a £100 brick. Unlockbootloader.exe was never designed for gingerbread so you shouldn't of attempted to take a risk like that. Next time, if you don't know what your doing, make sure you ask someone on the forums for help.

[luunatiq]

....does anybody else has another opinion? 10x diehard

[kyan31]

Ok, there might be a way you can fix the phone. First:

Download ICS stock B9xx

Place it on the root of your external SD card.

Turn on the phone and hold both volume +/- simultaneously until a pink bar shows up.

The bar will progress and once it's finished, your phone should boot on ICS.

NOTE: If the bar only progresses to a certain point, and doesn't get to the end, your phone is most likely bricked for good. Your could try and get help from a more experienced person, but I'm sure they would tell you the same.

[luunatiq]

i will try that... isn't anyway to erase all and start from buttom, cause i have an imei backup

[kyan31]

luunatiq, on 19 November 2012 - 09:52 PM, said:

i will try that... isn't anyway to erase all and start from buttom, cause i have an imei backup

That's the only easy reliable way.

[kyan31]

Tell me if you got it to work.

[luunatiq]

hey:D it worked, the solution is: first force upgraded the vendor then force upgraded b926 china version and it worked , imei is ok, all fine, didn't worked with middle package and upgrade to b895(i was on b893)...thank you very much @kyan31

[kyan31]

Your welcome