17 replies to this topic

[mikeioannina]

1) Open/create an image in GIMP with a resolution of 240x320

2) Flip the image horizontally (make sure you FLIP don't ROTATE by 180 or text etc will be reversed)

3) Save The image as ".bmp" and expand the advanced settings menu

4) Choose The format as "16bit format R5 G6 B5"

5) Save the file as "logo.bmp"

6) Make sure the file size is 153670 bytes

7) Download the attached sample zip and replace "logo.bmp" in cache folder with your own

8) Flash the zip through CWM Recovery and enjoy the new boot logo


The attached zip includes a custom splash image made by me for RacerMod rom, try it and tell me if you like it

Attached Files

•  splash-racermod.zip   156.6K   33 downloads

Edited by mikeioannina, 05 December 2012 - 01:26 AM.

[d2sarwono]

err.. will this work on other phone??..

[mikeioannina]

d2sarwono, on 14 January 2013 - 12:41 PM, said:

err.. will this work on other phone??..

Which phone?

[idrisov]

This is only for gen 2?

[mikeioannina]

idrisov, on 17 January 2013 - 04:55 PM, said:

This is only for gen 2?

I haven't tested on gen1 but it should work without modification

[satp0lpp]

cannot install via cwm
(status 0)
installation aborted.

[mikeioannina]

satp0lpp, on 20 January 2013 - 10:46 AM, said:

cannot install via cwm
(status 0)
installation aborted.

Which CWM version?

[satp0lpp]

CWM version 4.0.1.5

[mikeioannina]

satp0lpp, on 20 January 2013 - 07:44 PM, said:

CWM version 4.0.1.5

I haven't tested with this version, maybe you need the latest gingerbread 5.0.2.8 cwm. Check my RarerMod thread.

[jogjadroid]

nice tutorial
will try later on my free time

[satp0lpp]

mikeioannina, on 20 January 2013 - 10:51 PM, said:

I haven't tested with this version, maybe you need the latest gingerbread 5.0.2.8 cwm. Check my RarerMod thread.

same,, also not work

[Raphael Machado]

Hello mike,
I tested with 5.0.2.8 cwm and same problem:

Quote

cannot install via cwm
(status 0)
installation aborted.

[mikeioannina]

Raphael Machado, on 24 January 2013 - 07:04 PM, said:

Hello mike,
I tested with 5.0.2.8 cwm and same problem:

I don't have time to test this now, I'm working on RacerMod :/
Maybe at a later date

[Raphael Machado]

No problem bro.
We can wait!

[noobzone]

I had the same problem with the installation. error 0. after a little bit of search I found it was the binary. just replace the "update-binary" in \META-INF\com\google\android with a update binary from a rom or something that you know it can be installed on your racer. just a temp-fix until the perm-fix

EDIT: are you sure it is the same path? I installed with no error but still got the same android green robot... I didn't change the script only the binary

Edited by noobzone, 28 January 2013 - 11:47 PM.

[mikeioannina]

noobzone, on 28 January 2013 - 11:44 PM, said:

I had the same problem with the installation. error 0. after a little bit of search I found it was the binary. just replace the "update-binary" in \META-INF\com\google\android with a update binary from a rom or something that you know it can be installed on your racer. just a temp-fix until the perm-fix

EDIT: are you sure it is the same path? I installed with no error but still got the same android green robot... I didn't change the script only the binary

This guide changes the initial zte logo. The partition path is the same for all zte phones

[noobzone]

never heard of that logo o.O gen1 usually give the green android robot and then comes the bootanimation

[dreluo]

Raphael Machado, on 24 January 2013 - 07:04 PM, said:

Hello mike,
I tested with 5.0.2.8 cwm and same problem:

Same problem as you say.