319 replies to this topic

[perez1311]

i find it funny that people try to make a toaster out of a phone...

come on guys, overclocking a desktop cpu is as hard as it is and you are trying to do it on something that only has passive cooling?
maybe +50-70MHz will work fine but more than 100MHz is just overkill as it will not improve the performance that much since the device only has 512mb of ram anyway. you are just wasting battery.
if you don't believe me, test it for your self with some benchmarks.

as i said before, for what i've tested, the best is to leave everything as it is, it runs the best, at least for me.

_InCoGnIt_, on 04 March 2013 - 07:22 PM, said:

That was me. I have a German official Rom but i have a Portuguese Acqua.
I did exactly what you did and wifi is still dead...

German official Recovery
German stock Rom
CWM
CM10

I´m not gonna see a working JB on mine for sure

i have the german recovery and it works fine. have you tried flashing the recovery (the original one) again? Might not work but it's worth a try.

[KonstaT]

_InCoGnIt_, on 04 March 2013 - 07:22 PM, said:

That was me. I have a German official Rom but i have a Portuguese Acqua.
I did exactly what you did and wifi is still dead...

German official Recovery
German stock Rom
CWM
CM10

I´m not gonna see a working JB on mine for sure

Are you guys absolutely sure that you have done a proper full wipe before you install the ROM? = wipe data & factory reset, mounts & storage -> format system

This make even less sense that it did before. There is no magic, mystery or luck involved. It must be something that you do (or you don't do).

[Di0g0]

KonstaT, on 04 March 2013 - 08:10 PM, said:

Are you guys absolutely sure that you have done a proper full wipe before you install the ROM? = wipe data & factory reset, mounts & storage -> format system

This make even less sense that it did before. There is no magic, mystery or luck involved. It must be something that you do (or you don't do).

Before I installed this ROM I made the follow steps:

1. Wipe data/factory reset
2. Wipe cache partition
3. Open mounts and storage
4. format /system
5. format /cache
6. format /data
7. Advanced menu
8. wipe dalvik cache

And wifi doesn't work (this coming from the original TMN Rom)

[KonstaT]

Di0g0, on 04 March 2013 - 08:14 PM, said:

Before I installed this ROM I made the follow steps:

1. Wipe data/factory reset
2. Wipe cache partition
3. Open mounts and storage
4. format /system
5. format /cache
6. format /data
7. Advanced menu
8. wipe dalvik cache

And wifi doesn't work (this coming from the original TMN Rom)

Well, that's a bit excessive. There's no point in formatting certain partitions two or three times.

Wipe data/factory reset is enough in most cases. Mounts and storage -> format system is a precaution because CyanogenMod ROMs include certain backup tools (e.g. for Gapps) that are run on ROM install.

Question now is if wifi works coming from Medion ROM. I opened a new thread for wifi issue on Acqua. All discussion about that issue belongs to that thread from now on. There's no point in cluttering three/four threads here when this is clearly not a ROM specific issue.
http://www.modaco.co...blade-iii-roms/

[sam tyler]

sorry to go off topic, but KonstaT if you read this,could you offer any advice on  rooting and recovery on the zte grand x forum as so far the forum has only one ROM we have find some on info on root/recovery know its a lot to ask,and of course the rules here forbid p.m`s..devs about this sort of stuff.so if you have a spare 5 mins,some peals of wisdom would help us greatly on the grand x forum.many thanks.and sorry to put this on this forum.

Edited by sam tyler, 04 March 2013 - 08:52 PM.

[c300fan]

Viber no sound. But skype works.

Unencrypted open wifi hotspot does not work at all at blade iii.

Camera green screen . (((

Edited by c300fan, 04 March 2013 - 09:38 PM.

[_InCoGnIt_]

Now, i get back to stock German to try everything all over again... can´t have CWM working.
I make everything like in the other 5 or 6 times, the process is complete and says it´s OK but when i try to go to CWM it appears the stock one.

I´m still stuck in Stock German Rom but now whitout CWM.

Edited by _InCoGnIt_, 05 March 2013 - 09:41 AM.

[papars]

Install again CWM (using adb / fastboot).

[_InCoGnIt_]

papars, on 05 March 2013 - 07:43 AM, said:

Install again CWM (using adb / fastboot).

That´s what i did, like the other few times i made this process. It´s the first time that doesn´t work and i don´t know why

adb reboot bootloader
fastboot flash reovery recovery-cwm6027-atlas40.img
fastboot reboot

[zloduh]

_InCoGnIt_, on 05 March 2013 - 09:40 AM, said:

That´s what i did, like the other few times i made this process. It´s the first time that doesn´t work and i don´t know why

adb reboot bootloader
fastboot flash reovery recovery-cwm6027-atlas40.img
fastboot reboot

try adb reboot recovery

[_InCoGnIt_]

zloduh, on 05 March 2013 - 03:37 PM, said:

try adb reboot recovery

Same thing, right to stock recovery.

After a while i typed adb boot recovery-cwm6027-atlas40.img and went right to cwm. Iwas able to install CM10 but when i rebooted to recovery, the stock one appear again.
I try the wifi and still dead.

I think i´m gonna make a paper weight with the phone

Edited by _InCoGnIt_, 05 March 2013 - 10:56 PM.

[zloduh]

why not flash cm9? or go back to stock...

Edited by zloduh, 06 March 2013 - 05:43 AM.

[papars]

_InCoGnIt_, on 05 March 2013 - 09:44 PM, said:

Same thing, right to stock recovery.

After a while i typed adb boot recovery-cwm6027-atlas40.img and went right to cwm. Iwas able to install CM10 but when i rebooted to recovery, the stock one appear again.
I try the wifi and still dead.

I think i´m gonna make a paper weight with the phone

This wont work.  Basically you are booting CWM, not writing to the phone.
If you can boot to the CWM (as you say) then flash the CWM zip it should install it on the phone.

[_InCoGnIt_]

papars, on 06 March 2013 - 07:01 AM, said:

This wont work.  Basically you are booting CWM, not writing to the phone.
If you can boot to the CWM (as you say) then flash the CWM zip it should install it on the phone.

i will try that

Thanks papars.

[thmnss]

I'm exactly the same problem as you, I can not install any other recovery or cwm, tried quite a few times already and nothing .. I'm just stuck to the Medion recovery ... I do not know what to do in order to install cwm again ...

already got ... I installed the CM10.1 doing:

adb reboot bootloader
fastboot boot recovery-cwm6027-atlas40.img
Install the ROM CM10.1
Flash the recovery-clockwork-6.0.2.7-atlas40.zip

And it worked, not sure why but I have already CWM again

Edited by thmnss, 06 March 2013 - 05:02 PM.

[_InCoGnIt_]

thmnss, on 06 March 2013 - 04:40 PM, said:

I'm exactly the same problem as you, I can not install any other recovery or cwm, tried quite a few times already and nothing .. I'm just stuck to the Medion recovery ... I do not know what to do in order to install cwm again ...

already got ... I installed the CM10.1 doing:

adb reboot bootloader
fastboot boot recovery-cwm6027-atlas40.img
Install the ROM CM10.1
Flash the recovery-clockwork-6.0.2.7-atlas40.zip

And it worked, not sure why but I have already CWM again

Thanks man, i got cwm again by your method

[x6itru]

I have small problem with WiFi on blade 3, when I trying to download anything it just lost connection. ( I can browse the net but can't download anything.)

[satspyvk]

_InCoGnIt_, on 05 March 2013 - 09:40 AM, said:

fastboot flash reovery recovery-cwm6027-atlas40.img

reovery ??

You mean "recovery" , right ??


Cheers

[marink02]

I found out that there is a problem with bluetooth audio streaming in this ROM, after changing sample rate value for ad2p in /system/etc/audio_policy.conf from 48000 to 44100 and rebooting it works with some minor glitches.

[Komar1597]

@KonstaT:  In later versions of the kernel will be possible GPU overclock ?