I tried to unlock my T-mobile Vivacity following the instructions here http://www.getandroi...acity-for-free/ and now my phone gets stuck on CWM based recovery v4.0.1.5. The up and down keys work but I can not select anything by pressing the home key as it does not respond. How can I update CWM recovery to a later version as at the moment I can't do anything. If I start up holding the down key I get the FTM logo.
Help: tried to unlock now home key not working
Started by
atic
, May 05 2013 11:43 AM
#1
Posted 05 May 2013 - 11:43 AM
#2
Posted 05 May 2013 - 02:57 PM
How can I add stock rom in update.zip if the Home key isn't working? If I scroll down back key enabled appears on the screen, I have tried using the power button at this point but still noting happens.
#3
Posted 05 May 2013 - 08:11 PM
go to ZTE web site look up device in downloads follow instructions it will flash your phone back to 2.3.5
#4
Posted 06 May 2013 - 12:17 AM
If you place cwm 6 on this forum in an folder named image and rename the .bin file too image.bin then it will install when you just turn on the phone.
You'll need an sd card reader or to get into android to do that though.
You'll need an sd card reader or to get into android to do that though.
#5
Posted 06 May 2013 - 10:49 AM
I made a backup with QPST, if I install a differant CWM version it will not allow me to restore my backup as it says "One very important note! Backups created with the older recovery won't work with the new version"
#6
Posted 06 May 2013 - 12:13 PM
From here http://www.getandroi...acity-for-free/
Steps 1-7, are done
steps 8-10, I can't do because I cant enable debugging mode
steps 11-16, I can re-do and I have a backup from step 12
step 16, I can't do as I cannot select anything with the Home key, or the power button. Is there anyway to apply sdcard:update.zip?
I don't think the phone is rooted. Can I flash CWM with ADB commands?
Steps 1-7, are done
steps 8-10, I can't do because I cant enable debugging mode
steps 11-16, I can re-do and I have a backup from step 12
step 16, I can't do as I cannot select anything with the Home key, or the power button. Is there anyway to apply sdcard:update.zip?
I don't think the phone is rooted. Can I flash CWM with ADB commands?
#7
Posted 06 May 2013 - 01:12 PM
Hi atic
I think I've just had this problem, it wont let you select usb debugging? Try steps 8 to 10 again (leave it for a few minutes) and see if you get a windows update. If not here's a link to the ADB method. http://sanfranciscoa...i-zte-crescent/
I think I've just had this problem, it wont let you select usb debugging? Try steps 8 to 10 again (leave it for a few minutes) and see if you get a windows update. If not here's a link to the ADB method. http://sanfranciscoa...i-zte-crescent/
Like the custom ROM on your phone? Why not buy the dev a beer!!
#8
Posted 07 May 2013 - 08:44 PM
Any luck?
#9
Posted 11 May 2013 - 03:00 PM
No no luck because I can not do steps 8 to 10.
When I turn on the phone I get this screen http://www.jayceooi.com/wp-content/uploads/2011/08/SGS2-ClockworkMod-Recovery-Mode.jpg
except it is called CWM-based Recovery v4.0.1.5.
I can use the volume keys to move up and down but can not select anything else because none of the capacitive keys work.
Same problem as this thread from last year
http://www.modaco.co...od-please-help/
When I turn on the phone I get this screen http://www.jayceooi.com/wp-content/uploads/2011/08/SGS2-ClockworkMod-Recovery-Mode.jpg
except it is called CWM-based Recovery v4.0.1.5.
I can use the volume keys to move up and down but can not select anything else because none of the capacitive keys work.
Same problem as this thread from last year
http://www.modaco.co...od-please-help/
#10
Posted 12 May 2013 - 12:31 AM
Sounds like you have installed cwm on your boot partition instead of recovery.
You'll need to use adb in ftm mode via your pc to revert to stock tpt and recovery/rom. I'm afraid this is beyond my knowledge.
You'll need to use adb in ftm mode via your pc to revert to stock tpt and recovery/rom. I'm afraid this is beyond my knowledge.
#11
Posted 13 May 2013 - 05:23 PM
Don't know if you've seen this or not, It's save a few devices. Maybe worth a try...http://www.modaco.co...-dead-vivacity/
Like the custom ROM on your phone? Why not buy the dev a beer!!
#12
Posted 14 May 2013 - 07:41 AM
atic, on 11 May 2013 - 03:00 PM, said:
No no luck because I can not do steps 8 to 10.
When I turn on the phone I get this screen http://www.jayceooi.com/wp-content/uploads/2011/08/SGS2-ClockworkMod-Recovery-Mode.jpg
except it is called CWM-based Recovery v4.0.1.5.
I can use the volume keys to move up and down but can not select anything else because none of the capacitive keys work.
Same problem as this thread from last year
http://www.modaco.co...od-please-help/
When I turn on the phone I get this screen http://www.jayceooi.com/wp-content/uploads/2011/08/SGS2-ClockworkMod-Recovery-Mode.jpg
except it is called CWM-based Recovery v4.0.1.5.
I can use the volume keys to move up and down but can not select anything else because none of the capacitive keys work.
Same problem as this thread from last year
http://www.modaco.co...od-please-help/
#13
Posted 08 June 2013 - 07:07 PM
surfungus, on 13 May 2013 - 05:23 PM, said:
Don't know if you've seen this or not, It's save a few devices. Maybe worth a try...http://www.modaco.co...-dead-vivacity/
Thank you, this rescued my phone.
#14
Posted 08 June 2013 - 11:20 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users







Sign In
Create Account

Back to top









