Guest Firestorm79 Posted April 19, 2013 Report Share Posted April 19, 2013 nah not working, let me tell you guys step by step what I've done: 1) I installed any adb/superuser etc. Then ran 'San Diego' from the C drive. 2) The Tool successfully pushed adb insecure on to my phone, but then there was a one line message saying: 'run adb, click box, unplug mobile then replug usb, then press any key to continue' 3) I go into my phone apps, run adb insecure, and it gives me that stupid message about 'superuser access is needed, but could not be acquired. are you rooted and did you give permission?' 4) I ignore it and carry on by pressing any key. 5) I get the full menu and press '7', 6) the shell says pushing busybox, pushing su binary, pushing superuser app, etc I get the restore option, so I hit restore. 7) Shell says 'successful, going to reboot device! Waiting for device to show up again...' 8) THEN I GET THIS MESSAGE: mount: Operation not permitted mv: can't create '/system/xbin/su': Read-only file system mv: can't create '/system/app/Superuser.apk': Read-only file system cp: can't create '/system/xbin/busybox': Read-only file system Unable to chmod /system/xbin/su: No such file or directory Unable to chmod /system/xbin/su: No such file or directory Unable to chmod /system/app/Superuser.apk: No such file or directory Unable to chmod /system/xbin/busybox: No such file or directory rm failed for /data/local.prop, No such file or directory reboot: Operation not permitted You can close all open command-prompts now! After reboot all is done! Have fun! Bin4ry Press any key to continue . . . Link to comment Share on other sites More sharing options...
Guest Firestorm79 Posted April 19, 2013 Report Share Posted April 19, 2013 In fact here's the full message from start of my process to finish...: Please make your decision:7 * daemon not running. starting it now on port 5037 * * daemon started successfully * ============================================= [ This script will root your Android ] [ phone with adb restore function Script ] [ by Bin4ry thanks toGoroh_kun and tkymgr ] [ for the idea Edited by Ricky wyatt for ] [ Orange San diego ] ============================================= New Rooting Your Phone Press any key to continue . . . Pushing busybox.... 3770 KB/s (1085140 bytes in 0.281s) Pushing su binary .... 2899 KB/s (23755 bytes in 0.008s) Pushing Superuser app 3973 KB/s (1468798 bytes in 0.361s) Making busybox runable ... Now unlock your device and confirm the restore operation. Please look at your device and click RESTORE! If all is successful i will tell you, if not this shell will run forever. Running ... Successful, going to reboot your device! Waiting for device to show up again.... mount: Operation not permitted mv: can't create '/system/xbin/su': Read-only file system mv: can't create '/system/app/Superuser.apk': Read-only file system cp: can't create '/system/xbin/busybox': Read-only file system Unable to chmod /system/xbin/su: No such file or directory Unable to chmod /system/xbin/su: No such file or directory Unable to chmod /system/app/Superuser.apk: No such file or directory Unable to chmod /system/xbin/busybox: No such file or directory rm failed for /data/local.prop, No such file or directory reboot: Operation not permitted You can close all open command-prompts now! After reboot all is done! Have fun! Bin4ry Press any key to continue . . . Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted April 19, 2013 Report Share Posted April 19, 2013 Maybe it's time to start from scratch by reinstalling the Xolo ICS rom. You may need to clear cache as well, do not install SU from the playstore. Link to comment Share on other sites More sharing options...
Guest glossywhite Posted April 19, 2013 Report Share Posted April 19, 2013 Uninstall the one you downloaded from the playstore (both if necessary) and run root again. Don't forget to kill any instance of adb first. ^ This. To root, all you need is on modaco. Try reflashing Xolo ICS, by enabling debugging mode if not enabled, then: fastboot.exe -i 0x8087 flash update update.zip Your settings and installed apps will remain unchanged by using this. Finally, try my root/unroot kit: Link to comment Share on other sites More sharing options...
Guest vaibhav D Posted April 21, 2013 Report Share Posted April 21, 2013 (edited) thanks Edited April 21, 2013 by vaibhav D Link to comment Share on other sites More sharing options...
Guest vaibhav D Posted April 27, 2013 Report Share Posted April 27, 2013 (edited) the 37 mb update is visible now. should i update my phone ? Edited April 30, 2013 by vaibhav D Link to comment Share on other sites More sharing options...
Guest Inumanoj Posted April 27, 2013 Report Share Posted April 27, 2013 I get the same error as firestorm79, Please make your decision:7 * daemon not running. starting it now on port 5037 * * daemon started successfully * ============================================= [ This script will root your Android ] [ phone with adb restore function Script ] [ by Bin4ry thanks toGoroh_kun and tkymgr ] [ for the idea Edited by Ricky wyatt for ] [ Orange San diego ] ============================================= New Rooting Your Phone Press any key to continue . . . Pushing busybox.... 3770 KB/s (1085140 bytes in 0.281s) Pushing su binary .... 2899 KB/s (23755 bytes in 0.008s) Pushing Superuser app 3973 KB/s (1468798 bytes in 0.361s) Making busybox runable ... Now unlock your device and confirm the restore operation. Please look at your device and click RESTORE! If all is successful i will tell you, if not this shell will run forever. Running ... Successful, going to reboot your device! Waiting for device to show up again.... mount: Operation not permitted mv: can't create '/system/xbin/su': Read-only file system mv: can't create '/system/app/Superuser.apk': Read-only file system cp: can't create '/system/xbin/busybox': Read-only file system Unable to chmod /system/xbin/su: No such file or directory Unable to chmod /system/xbin/su: No such file or directory Unable to chmod /system/app/Superuser.apk: No such file or directory Unable to chmod /system/xbin/busybox: No such file or directory rm failed for /data/local.prop, No such file or directory reboot: Operation not permitted You can close all open command-prompts now! After reboot all is done! Have fun! Bin4ry Press any key to continue . . . ............................................................................................................................ I am not sure if a working fix has been posted, can someone help me step by step....? sorry complete n00b, i've tried glossy's version as well, similar error. During the boot, everything fails and there is no second boot and no root! I have ICS 4.0.4, did everything with USB debugging enabled and INTEL driver ver 1.1.5 I have no idea what I am doing wrong. Please help.. Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted April 27, 2013 Report Share Posted April 27, 2013 I get the same error as firestorm79, I have no idea what I am doing wrong. Please help.. Have you tried killing any instance of adb running and trying the tool again? Plug the phone out first and reboot(make sure the phone is fully finished booting). Link to comment Share on other sites More sharing options...
Guest utternoob Posted April 27, 2013 Report Share Posted April 27, 2013 Looks to me like it has been blocked by the updates that have been pushed out. Did you install any? Link to comment Share on other sites More sharing options...
Guest glossywhite Posted April 27, 2013 Report Share Posted April 27, 2013 Re-install stock Xolo using fastboot. Link to comment Share on other sites More sharing options...
Guest Inumanoj Posted April 27, 2013 Report Share Posted April 27, 2013 @bluemoonrising I did, killed adb, tried many times over.... either gets stuck at If all is successful i will tell you, if not this shell will run forever. or the usual happens. Tried rebooting as well. ........ @utternoob I haven't updated anything as far as i know. ........ @glossy By stock xolo, u mean a factory reset? Would it delete all my apps and data? But no I haven't tried this yet ......... and thank you guys for your response... Should i reset it to factory? Link to comment Share on other sites More sharing options...
Guest glossywhite Posted April 27, 2013 Report Share Posted April 27, 2013 @bluemoonrising I did, killed adb, tried many times over.... either gets stuck at If all is successful i will tell you, if not this shell will run forever. or the usual happens. Tried rebooting as well. ........ @utternoob I haven't updated anything as far as i know. ........ @glossy By stock xolo, u mean a factory reset? Would it delete all my apps and data? But no I haven't tried this yet ......... and thank you guys for your response... Should i reset it to factory? Hello :) Your data, settings and apps are safe, unless you intentionally wipe /cache and /data partitions, which you won't when you re-install the Xolo ROM via fastboot :) Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted April 27, 2013 Report Share Posted April 27, 2013 @bluemoonrising I did, killed adb, tried many times over.... either gets stuck at If all is successful i will tell you, if not this shell will run forever. or the usual happens. Tried rebooting as well. ........ @utternoob I haven't updated anything as far as i know. ........ @glossy By stock xolo, u mean a factory reset? Would it delete all my apps and data? But no I haven't tried this yet ......... and thank you guys for your response... Should i reset it to factory? boot into fastboot then open c:\sandiego\tools then click command prompt and then type: fastboot -i 0x8087 flash update c:\sandiego\tools\xolo\update.zip (make sure you have the "xolo uppdate.zip" in c:\sandiego\tools\xolo) then go into recovery on phone and choose the update.zip Link to comment Share on other sites More sharing options...
Guest Inumanoj Posted April 27, 2013 Report Share Posted April 27, 2013 (edited) I dont think i have the update.zip i used with me anymore, so i download a new one or does it come with modaco package? Edited April 27, 2013 by Inumanoj Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted April 27, 2013 Report Share Posted April 27, 2013 I dont think i have the update.zip i used with me anymore, so i download a new one or does it come with modaco package? You can download from here :- http://www.xolo.in/xolocare/xolo-x900-software-upgrade Do not accept any more updates once you're sorted. Link to comment Share on other sites More sharing options...
Guest Inumanoj Posted April 28, 2013 Report Share Posted April 28, 2013 Thank you! This fixed my problem! I was searching for a solution for quite a while now! Cheers to guys! :) Link to comment Share on other sites More sharing options...
Guest Inumanoj Posted April 28, 2013 Report Share Posted April 28, 2013 Just a couple more questions guys, 1) Signal booster didn't work for me fails to copy and is unable to chmod 2) Enable Sd card and Enable Mass storage aren't they the same? Which one should I choose, if I want to use a micro sd in my phone? What's the maximum allowed? Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted April 28, 2013 Report Share Posted April 28, 2013 (edited) Just a couple more questions guys, 1) Signal booster didn't work for me fails to copy and is unable to chmod 2) Enable Sd card and Enable Mass storage aren't they the same? Which one should I choose, if I want to use a micro sd in my phone? What's the maximum allowed? For question 1) :- Signal boost files are here in case you don't have them already :- Download Copy the SignalBoost folder you downloaded into C:\SanDiego\tools. Then create a new text document and paste the following into it ;- adb.exe kill-server adb.exe start-server adb.exe wait-for-device adb remount sleep 5 adb push C:\SanDiego\tools\SignalBoost\app\signalboost.apk /system/app adb push C:\SanDiego\tools\SignalBoost\etc\rild.conf /system/etc adb push C:\SanDiego\tools\SignalBoost\lib\libganril.so /system/lib adb push C:\SanDiego\tools\SignalBoost\lib\libkineto.so /system/lib adb push C:\SanDiego\tools\SignalBoost\lib\librilswitch.so /system/lib adb reboot sleep 5 adb.exe kill-server save the text file into C:\SanDiego\tools and rename it to a .bat file. Plug your phone in and run the .bat file you just created. You can of course just copy & paste over the AIO version in the sandiego.bat As for question 2) I think the mass storage option combines the 2 storage areas(USB & SD card) together. Presumably you need to enable the SD card first before using the mass storage option. Perhaps someone else could confirm? I think it's possible to use a 64GB micro SD card but given the cost I don't believe anyone has been brave enough to try yet. I'm thinking of getting a 32GB card and enabling it myself, I'm just trying to decide which of the cards on Amazon are actually real class 10 or fake lower spec ones relabeled :angry: Edit :- reading the manual(something I suggest to other people but didn't do myself, whoops) it says "This will install an application on your phone so you can open it to enable mass storage or mtp". So I'm guessing it's not massively important. In fact I think Ricky did discover a way(clever sod that he is) to combine the storage areas into one big partition but he wouldn't publish it in public. It was very technical and he didn't want everybody trying it and permanently bricking their phones, and especially didn't want all the inevitable PMs that would result(can't blame him on that). If you fancy trying it you would need to PM him and ask pretty please. Edited April 28, 2013 by BlueMoonRising Link to comment Share on other sites More sharing options...
Guest vaibhav D Posted April 30, 2013 Report Share Posted April 30, 2013 i create For question 1) :- Signal boost files are here in case you don't have them already :- Download Copy the SignalBoost folder you downloaded into C:\SanDiego\tools. Then create a new text document and paste the following into it ;- adb.exe kill-server adb.exe start-server adb.exe wait-for-device adb remount sleep 5 adb push C:\SanDiego\tools\SignalBoost\app\signalboost.apk /system/app adb push C:\SanDiego\tools\SignalBoost\etc\rild.conf /system/etc adb push C:\SanDiego\tools\SignalBoost\lib\libganril.so /system/lib adb push C:\SanDiego\tools\SignalBoost\lib\libkineto.so /system/lib adb push C:\SanDiego\tools\SignalBoost\lib\librilswitch.so /system/lib adb reboot sleep 5 adb.exe kill-server save the text file into C:\SanDiego\tools and rename it to a .bat file. Plug your phone in and run the .bat file you just created. You can of course just copy & paste over the AIO version in the sandiego.bat As for question 2) I think the mass storage option combines the 2 storage areas(USB & SD card) together. Presumably you need to enable the SD card first before using the mass storage option. Perhaps someone else could confirm? I think it's possible to use a 64GB micro SD card but given the cost I don't believe anyone has been brave enough to try yet. I'm thinking of getting a 32GB card and enabling it myself, I'm just trying to decide which of the cards on Amazon are actually real class 10 or fake lower spec ones relabeled :angry: Edit :- reading the manual(something I suggest to other people but didn't do myself, whoops) it says "This will install an application on your phone so you can open it to enable mass storage or mtp". So I'm guessing it's not massively important. In fact I think Ricky did discover a way(clever sod that he is) to combine the storage areas into one big partition but he wouldn't publish it in public. It was very technical and he didn't want everybody trying it and permanently bricking their phones, and especially didn't want all the inevitable PMs that would result(can't blame him on that). If you fancy trying it you would need to PM him and ask pretty please. i rename the text document file and rename it to a .bat file. Plug my phone but when i open the file he open in text document nothing is happening ......... Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted April 30, 2013 Report Share Posted April 30, 2013 You are double clicking the bat file and not just editing are you? Don't take this as sarcasm as I don't know your level of understanding. Have you got the files listed in the bat file in the folders noted? Increase the sleep time (the second to last line) to 20 from 5 to give you a bit more time to see what messages you're getting. Link to comment Share on other sites More sharing options...
Guest Ashbeard Posted May 1, 2013 Report Share Posted May 1, 2013 I managed to root my phone using this tool, but some other things will not work. For instance the Kernel mods and flibblesan's tweaks. Oddly, the GL drivers worked fine. I am wondering if the 27MB update had something to do with this. I downgraded by using the update.zip and the stock recovery, but perhaps the downgrade didn't remove all the changes? Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted May 1, 2013 Report Share Posted May 1, 2013 I managed to root my phone using this tool, but some other things will not work. For instance the Kernel mods and flibblesan's tweaks. Oddly, the GL drivers worked fine. I am wondering if the 27MB update had something to do with this. I downgraded by using the update.zip and the stock recovery, but perhaps the downgrade didn't remove all the changes? If you managed to get Xolo ICS on to it, the next thing after rooting would be to add flibblesans mods. They SHOULD install fine normally(ensure adb is dead first), did you do anything else in between? Link to comment Share on other sites More sharing options...
Guest Ashbeard Posted May 1, 2013 Report Share Posted May 1, 2013 If you managed to get Xolo ICS on to it, the next thing after rooting would be to add flibblesans mods. They SHOULD install fine normally(ensure adb is dead first), did you do anything else in between? Flibblesan's mod bricks it and I have to reinstall ICS from recovery. So the thing I should be doing is making sure adb insecure is dead before I install the other mods? Link to comment Share on other sites More sharing options...
Guest Ashbeard Posted May 1, 2013 Report Share Posted May 1, 2013 Flibblesan's mod bricks it and I have to reinstall ICS from recovery. So the thing I should be doing is making sure adb insecure is dead before I install the other mods? OK I think it's working now. I installed Flibble before the OpenGL drivers. Still have to see about the kernel tweaks. Link to comment Share on other sites More sharing options...
Guest BlueMoonRising Posted May 2, 2013 Report Share Posted May 2, 2013 Couldn't help you with the kernel tweaks as not only have I never used them I don't even know what they're for. :blush: What are they exactly(or even roughly)? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now