witts end stuck at cwm screen
Posted 27 August 2013 - 03:27 PM
Posted 27 August 2013 - 03:34 PM
Huawei Ascend P1 (Untouched, for now)
iPhone 4 16gb Jailbroke (6.1.3 semi-tethered) (Sold)
HTC ONE V (Unlocked Bootloader/TWRP installed) running CM10 (Sold)
ZTE Crescent (OSF2)- Paranoid Android 4.1 (Sold)
Samsung Galaxy I5500- CM7 (Sold)
My Ported Roms:
| AtomicMod (Beta) |
Posted 27 August 2013 - 05:13 PM
Posted 27 August 2013 - 11:47 PM
Also do you have a vivicity?San Fran 2? Touch plus?
Posted 28 August 2013 - 03:44 PM
TPT is a way of flashing part of the low-level firmware on your phone. After successfully flashing the files below you will regain access to clockworkmod. You need a different type of TPT depending on what variant of the Blade you have. If you have a China Unicom v880 or any other Chinese variant then you must not flash a TPT designed for European Blades, and vice versa. Be aware that flashing a modified or corrupt TPT can permanently brick your phone. Choose the appropriate file below.
European Gen1 TPT
Use this if your phone is a European GSM variant and if it is Gen1 or has been upgraded to Gen2 via TPT. This will flash stock Gen1 firmware.
European Gen2 TPT
Use this if your phone is a European GSM variant and if it was sold as Gen2 or upgraded to stock Gen2 via windows. This will flash stock Gen2 firmware.
China Unicom v880 Gen2 TPT
Use this if your phone is a China Unicom v880 (unsure, but may work on Chinese u880/x880). This will flash the stock Gen2 firmware taken from the B15 android 2.2.2 update.
Flashing a TPT
1.Download the applicable TPT file from above.
2.Unzip and put the “image” folder onto the root directory of your SD card.
3.Disconnect and reconnect your SD card and check the integrity of the TPT files. There is a file called "image.hash" in the image folder which contains all the files' md5 hashes in plain text. Make sure that the md5 of all the files match, or you may brick your phone.
4.Turn on your phone with the SD card inserted and with menu and volume up held.
5.The screen will either stay black or show green text (if you see the green android immediately then it didn't work), and will restart into clockworkmod when done. Wait at least 5 minutes for it to restart if you don’t see anything.
6.When it is finished (even if it didn't work), then remove the image directory from the SD card to prevent accidental flashing later on.
7.You can now flash a ROM using clockworkmod. If it doesn't work, then using a different SD card may help.
If you have a European variant then it is safe to try both Gen1 and Gen2 TPTs separately in case you have made a mistake.
I would anyday recommend flashing a TPT to recover it than the windows method given below. But in case you don't recover your blade using the TPT method,use the method below.
Posted 28 August 2013 - 03:44 PM
Posted 30 August 2013 - 01:48 AM
In short, don't use that tool. There's a knack to getting my phone to goto tpt flash mode. First you need to be holding the menu and volume up key. Whilst continuing to hold them down, you then hold the power button.
Then it should flash the tpt.
If it doesn't, then either:
You don't have the tpt image.bin file saved within a folder named image on your sd card
The shortcut on the vivicity is different from my phone.My phone is the Orange San Francisco 2. Try researching or trying differing combos maybe?
If this all fails, just follow the steps in the thread on this forum:
Posted 30 August 2013 - 01:50 AM
Posted 02 September 2013 - 06:57 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users