Can you tell me how to put my hudl into bootloader mode please? What I'm doing is connecting my hudl up, pressing the volume up/reset pin while hudl is on, it then powers down, I've done this with the rktool open and shut but still no luck. I've also tried with my device off, but I still can't get it to work. I think I've updated my drivers properly, I manually installed the drivers supplied with the rktools and it says they are up to date etc.. Thanks for any advice mate
I found that holding the Vol Up and pin reset together didn't work very well as I was holding in the pin reset too. If you power off then hold the Vol up button, then just press the reset hole (with a good quality paperclip ) quickly, it went into the bootloader ok.
I also went to this site http://www.rockchip.nl/downloads/
and installed the RK3188 autoinstaller driver package which is here https://www.copy.com...verAssitant.zip
Not sure if it helped because I think I was just having trouble getting it into bootloader, rather than having driver installation trouble.
Anyway it all worked in the end. Good luck!
If you are aready rooted you could try Quick Boot from the Play Store to boot into bootloader for you.
Edited by rob4x4, 18 December 2013 - 07:59 PM.