• install source built kernel with updated mmc drivers to fix 'freezing issue'
• add configs for external keyboard docks to fix 'keyboard dock wake issue'
• disable dm-verity (because it's needed to modify /system partition)

Prerequisites:
You need to have the latest stock firmware and TWRP recovery installed. See 'Settings -> About Tablet' on your device and choose the file that matches your stock firmware version. Do not install these files on mismatching firmware versions!

How to install:
1. Download zip below matching your stock firmware and copy it to your device's sdcard.
2. Boot to TWRP recovery.
3. Install zip in TWRP.

Do not mirror my builds! Please post a link to this page instead.

vi10plus-fix-freeze-kbwake-RemixOS-B2016080801.zip
http://konstakang.com/devices/chuwi_vi10plus/stock-fix-freeze-kbwake
md5:968beb706a3bad6d53bcf12219b792be

vi10plus-fix-freeze-kbwake-Android-20160803.zip
http://konstakang.com/devices/chuwi_vi10plus/stock-fix-freeze-kbwake
md5:d7243d2ccd6081896bf7032e840940b1

Here's how to fix 'keyboard dock wake issue' on Hi10 Plus, Hi10 Pro, Hibook & Hibook Pro devices that don't need fix for 'freezing issue'. This patch will:

• add configs for external keyboard docks to fix 'keyboard dock wake issue'

How to install:
1. Disable dm-verity.
2. Download zip below and copy it to your device's sdcard.
3. Boot to TWRP recovery.
4. Install zip in TWRP.

vi10plus-fix-kbwake.zip
http://konstakang.com/devices/chuwi_vi10plus/stock-fix-freeze-kbwake
md5:b298502a706299087fcdec74de0efc7b

Here's how to add Widevide support on Vi10 Plus, Hi10 Plus, Hi10 Pro, Hibook, Hibook Pro & Hi12 to fix playback of DRM protected content with various media streaming apps. This patch will:

• add Widewine blobs from Cube iWork8 Ultimate

How to install:
1. Disable dm-verity.
2. Download zip below and copy it to your device's sdcard.
3. Boot to TWRP recovery.
4. Install zip in TWRP.

vi10plus-widevine.zip
http://konstakang.com/devices/chuwi_vi10plus/stock-fix-freeze-kbwake
md5:09892471a4b74585937da8f53a43dfd3

Here’s how to fix too high minimum brightness on Vi10 Plus, Hi10 Plus, Hi10 Pro, Hibook, Hibook Pro & Hi12. This patch will:

• install lights HAL that allows decreasing display brightness to minimum value set in Android framework

How to install:

1. Disable dm-verity.
2. Download zip below and copy it to your device’s sdcard.
3. Boot into TWRP recovery.
4. Install zip in TWRP.

vi10plus-fix-minbrightness.zip
http://konstakang.com/devices/chuwi_vi10plus/stock-fix-freeze-kbwake
md5:0862707567ca81265a639fa79eae7f57

Sources:

• Kernel

Thanks:

• Jide Technology for releasing Linux kernel source code for Chuwi Vi10 Plus
• festlv for the keybord dock wake fix

Do not mirror my builds! Please post a link to this page instead.

recovery-twrp3020-nexbox_a95x.img
http://konstakang.com/devices/nexbox_a95x/TWRP
md5:ae69ee66d014d5a1229c747107aaeca2

recovery-twrp-3.0.2-0-nexbox_a95x.zip (TWRP/stock recovery flashable)
http://konstakang.com/devices/nexbox_a95x/TWRP
md5:64881a9061fb0149c709d94ce38fac81

This device is rooted out-of-the-box and it has unlocked bootloader. Stock recovery also allows flashing zips that are signed with generic test key. I haven't found a way to use adb when connected with an USB cable. There's no way to boot the device into bootloader to use fastboot either. There's still about a dozen ways to install TWRP - here's a few.

Booting from SD card:
1. Download recovery-twrp3020-nexbox_a95x.img and rename it as recovery.img
2. Copy TWRP recovery.img to the root of your external SD card
3. Power down your device
4. Power up your device by pressing (and holding) reset button found in AV port (use a thin non-metal object - e.g. toothpick, plastic straw, etc)
5. Your device will boot into TWRP
6. Use TWRP to install the recovery flashable TWRP zip or use TWRP's 'flash image' option to install the TWRP recovery.img
7. Reboot recovery

Using stock recovery:
1. Download recovery-twrp-3.0.2-0-nexbox_a95x.zip and copy it to your external SD card or USB stick
2. Power down your device
3. Power up your device by pressing (and holding) reset button found in AV port (use a thin non-metal object - e.g. toothpick, plastic straw, etc)
4. Select 'apply update from EXT' -> 'update from sdcard/udisk' -> recovery-twrp-3.0.2-0-nexbox_a95x.zip
5. Reboot recovery

Using shell:
1. Download recovery-twrp3020-nexbox_a95x.img and rename it as recovery.img
2. Copy TWRP recovery.img to your internal storage, external SD card, or USB stick
3. Open e.g. Terminal Emulator and change into the directory you saved the TWRP recovery.img (/sdcard, /storage/sdcard1, or /storage/udisk0, respectively)
4. Execute following commands

su
dd if=recovery.img of=/dev/block/recovery

5. Reboot recovery

How to install proper root management:
1. Download SuperSU zip and copy it to your device's sdcards or USB stick
2. Boot to TWRP recovery
3. Install SuperSU zip in TWRP

How to restore stock recovery:
1. Download zip below and use any of the methods described above
2. Reboot recovery

recovery-stock-NEXBOX-A95X-201608151721.zip
http://konstakang.com/devices/nexbox_a95x/TWRP
md5:62477d5abc1872e5e40e56de30baf054

recovery-stock-NEXBOX-A95X-201606282036.zip
http://konstakang.com/devices/nexbox_a95x/TWRP
md5:d536cf298d3b578bcab49a33b2f142a3

Sources:

• Device

Do not mirror my builds! Please post a link to this page instead.

cm-12.1-20170128-UNOFFICIAL-KonstaKANG-chuwi_vi10plus.zip
http://konstakang.com/devices/chuwi_vi10plus/CM12.1

Google apps:
The Open Gapps Project

Working:

• Wifi
• Audio (playback/input/routing/headphones/etc)
• Bluetooth
• Camera
• Hardware video decoding & encoding
• Hardware acceleration and OpenGL rendering
• HDMI
• Houdini
• Keyboard dock
• Network/wifi location
• SD cards
• Stylus pen (HiPen H2)
• USB storage (MTP and PTP) & adb
• USB OTG (storage, mouse, keyboard)
• USB-tethering
• Wifi-tethering
• Touchscreen/multi-touch
• Sensors

Not working:

• ???

Issues:

• Audio not routed through HDMI

Sources:

• CM-CHT
• Kernel

Thanks:

• CyanogenMod team & everyone who's been working on CM12.1

Do not mirror my builds! Please post a link to this page instead.

http://konstakang.com/devices/chuwi_vi10plus/TWRP

Prerequisites:
1. Download and install Intel Android USB driver (Windows) or setup udev rules (Linux).
2. Download and install Android SDK tools and platform-tools to get adb and fastboot.

Unlocking the bootloader:
1. Enable developer settings by clicking 'Settings -> About tablet -> Build number' several times. Enable 'Settings -> Developer options -> OEM unlocking' (not sure if necessary) and 'Settings -> Developer options -> Android debugging'.
2. Plug in your device via USB cable and open terminal window as an administrator (Windows). Boot device into bootloader by executing

adb reboot bootloader

You can also boot to bootloader by holding volume down button when powering on the device (or when selecting to boot to Android if you have a dual-boot device).
3. Execute in terminal

fastboot oem unlock

Unlocking bootloader doesn't erase userdata on this device.

Installing TWRP:
1. Change into the directory you saved the TWRP recovery image, boot to bootloader as above, and execute

fastboot flash recovery recovery-twrp3020-cht_cr_mrd_w.img

You can also just boot TWRP recovery image by executing

fastboot boot recovery-twrp3020-cht_cr_mrd_w.img

You can boot to TWRP by executing 'adb reboot recovery'. It's also possible to boot to recovery by booting to bootloader first (as above), using volume keys to select 'recovery' option and using power key to confirm.

2. Install boot image that disables dm-verity before you modify your /system partition in any way. Otherwise dm-verity will prevent your device from booting.

How to restore stock recovery:
1. Download zip below suitable for your device and copy it to your device's sdcard.
2. Boot to TWRP recovery.
3. Install zip in TWRP.
4. Reboot recovery.

http://konstakang.com/devices/chuwi_vi10plus/stock-recovery

Sources:

• Device

Do not mirror my builds! Please post a link to this page instead.

lineage-13.0-20171020-UNOFFICIAL-KonstaKANG-chuwi_vi10plus.zip
http://konstakang.com/devices/chuwi_vi10plus/CM13

Google apps:
The Open Gapps Project

Working:

• Audio (playback/input/routing/headphones/etc)
• Bluetooth
• Camera
• Hardware acceleration and OpenGL rendering
• Hardware video decoding & encoding
• HDMI
• Houdini
• Keyboard dock
• Network/wifi location
• SD cards
• Sensors
• Stylus pen (HiPen H2)
• Touchscreen/multi-touch
• USB OTG (storage, mouse, keyboard)
• USB storage (MTP and PTP) & adb
• USB-tethering
• Wifi
• Wifi-tethering

Not working:

• ???

Issues:

• SELinux is disabled
• Distortion in photos (issue with mismatching Lollipop camera drivers & Marshmallow display drivers)
• Audio not routed through HDMI

Sources:

• CM-CHT
• Kernel

Thanks:

• CyanogenMod/LineageOS team & everyone who's been working on CM13

The following information I found on the internet.   It will come with a 5.7-inch FHD+ display with Corning Gorilla glass, 6GB of RAM, 128GB of storage, Helio P23, yep, NFC, 16MP + 5MP dual rear AI camera, 8MP Front, Android 8.1, Face and Fingerprint unlock. 

How the company is comparing it with Samsung and Cat rugged phones?

What do you say?

Do not mirror my builds! Please post a link to this page instead.

RemixOS-20160812-nexbox_a95x.zip
http://konstakang.com/devices/nexbox_a95x/RemixOS
md5:30f5f0de965e75cac148b701d9cdc406

Working:

• Wifi
• Audio
• Ethernet
• Hardware video decoding & encoding
• Hardware acceleration and OpenGL rendering
• HDMI
• Remote control
• SD cards
• USB OTG (storage, mouse, keyboard)

Not working:

• ???

Issues:

• There's bluetooth options in few places even though this device doesn't have bluetooth
• SELinux is in permissive mode (same as stock - bootloader passes this on cmdline and there's nothing I can do about it)
• It's still an early release - expect minor problems

Thanks:

• Jide for Remix OS

I've uploaded the stock recovery to Mega in case someone wants to take a look. DOWNLOAD

Do not mirror my builds! Please post a link to this page instead.

RemixOS-B2016092102-chuwi_vi10plus.zip
http://konstakang.com/devices/chuwi_vi10plus/RemixOS
md5:bae3c864d458192ed782d1ded5b10c9f

Working:

• Wifi
• Audio (playback/input/routing/headphones/etc)
• Bluetooth
• Camera
• Hardware video decoding & encoding
• Hardware acceleration and OpenGL rendering
• HDMI
• Keyboard dock
• Network/wifi location
• SD cards
• Stylus pen (HiPen H2)
• USB storage (MTP and PTP) & adb
• USB OTG (storage, mouse, keyboard)
• Touchscreen/multi-touch
• Sensors

Not working:

• ???

Changes I've made compared to the original firmware:

• include source built kernel with updated mmc drivers to fix 'freezing issue' on Vi10/Hi10 Plus
• add configs for external keyboard docks to fix 'keyboard dock wake issue'
• remove suspicious TeleyService & YouTubeOem apps that are bundled with stock Remix OS on Chuwi devices
• add Widevine blobs from Cube iWork8 Ultimate to fix playback of DRM protected content with various media streaming apps
• disable dm-verity
• enable/disable 'reboot to Windows' option on different devices

Sources:

• Kernel

Thanks:

• Jide for Remix OS
• Jide Technology for releasing Linux kernel source code for Chuwi Vi10 Plus
• festlv for the keybord dock wake fix
• matrixsoul for B2016092102 dump

As we know, Hi10plus suffers from SD card reader malfunction. And this dual boot anvironment desperatelly needs some common data space (available both: from Android and from MSwin)! Ideas to stick some micro pendrive for constant use is cumbersome (projecting pendrive is very prone to mechanical damage).

Thus, I would like to propose very 'simple' solution: enabling (somehow) MSwin partition r/w access from Android!

Win's partition is half empty, there is still over 20GB space for data!

But how to do it? Win's partition is visible from apk like StorageSpace or DiskInfo as

/dev/block/mmcblk0p14

However if you try to mount it in typical Linux way:

su

mkdir /data/aaa

mount /dev/block/mmcblk0p14 /data/aaa

it produces an error message:

root@cw_vi10plus_eu:/ # ls /dev/block/mmcblk0/dev/block/mmcblk0root@cw_vi10plus_eu:/ # mount /dev/block/mmcblk0p14 /data/aaaUsage: mount [-r] [-w] [-o options] [-t type] device directory1|root@cw_vi10plus_eu:/

Now, I want/need to change the partition sizes on the 64GB internal storage. I would prefer to reduce the Win10 partition to maybe 10GB and add all the rest to the Android partition.

Or, second-best would be to remove the Win10 partition completely, and have to whole internal storage for Android.

How do I go about preferably the first choice?

Thank you, Ross 

(moved from general...., sorry, my fault)

Design

It has a 2.5D double curvature design; this confers a different grip experience that is far from a traditional ruggedized phone. The shiny black PC material on the back panel gives Vernee Active a beautiful, modern look. According to Vernee, it is a smartphone at the military level. It is made of aluminum alloy frame together with TPU on the top and bottom. This combination went through almost 300 endurance tests, where the six sides and the four corners endured the fall tests without any problems. In addition, it presents double CD reinforced screws.

The Kevlar material has been used for the back shell. Thus it will have the ability to resist sliding and wear and stains. In addition, this material has a unique tactile feel, which combined with the shiny black frame will give you a unique grip. Vernee constantly adjusted the design and gave the Vernee Active phone a size of 156.7 x 80 x 11.2mm, so the Active has a traditional 5.0-inch smartphone body. However, the company managed to fit a 5.5-inch screen. The precise weight and size offer a good feeling when holding it, being easier to transport, standing out from other ruggedized mobiles.

Resistances

The Vernee Active has the IP68 waterproof certificate. It is also dustproof and fall resistant. No matter the water, the snow, the highlands or the desert, it will work perfectly, no matter how the environment changes.The Vernee Active has waterproof structural safety, which will prevent you from worrying about water. You can submerge up to 1.5m deep and work without problems for 30 minutes inside water. Also, not only is 99% dustproof, its excellent sealing allows you to prevent sediment from entering. Even in a muddy environment, the Vernee Active can be used without problems. Likewise, it will be your great companion. It does not matter if it is located in the North Pole or a very hot desert area; it resists temperatures between -30 ° C and 60 ° C.

Screen

It has a 5.5-inch JDI screen resolution 1980 x 1080. It is protected by Corning Gorilla Glass, and after several tests of resistance to shock, it was found that the tenacity is five times higher than that of normal glass. Due to the saturation of 85% of the color and the unique technology of light sensation, it will be able to see even under the sun.

Hardware

The Vernee Active is equipped with a Helio P25 Octa-core processor with powerful performance. Compared to the last generation, performance increased by 25% and energy consumption decreased by 30%. It is considered one of the fastest ruggedized phones. Being equipped with 6GB of RAM and 128GB of storage, plus the Helio P25 with customized VOS system, the Vernee Active will give you a very fast and fluid experience. It does not matter if they are heavy games or multiple applications, the system will always work quickly.

Camera

The smartphone has a 16.0MP Sony rear camera and 8.0MP front camera. It is compatible with PDAF technology and will capture everything incredibly; you can also take pictures underwater. The large aperture F2.2 and RWB technology help to obtain an excellent picture, even at night.

Connectivity

It is equipped with the incredible network of 6 modes of 28 bands. You can use the 4G network in most countries, so you will not have to change your phone when you travel. The Vernee Active supports dual-band 2.4GHz / 5.GHz WiFi, being super-fast when you browse the Internet. Also, it supports the Bluetooth 4.0 and OTG function, very convenient for connecting other devices. Also, the latest NFC technology will allow you to have a more secure and faster connection. It is compatible with the P sensor, the L sensor, the gravity sensor, the gyroscope and the compass. This will accompany you at any time when you are away from home. Likewise, it has a GLONASS + GPS dual navigation system, which will give it an even better outdoor use experience.

FDD_LTE/TDD_TLE/WCDMA/GSM/GPRS/EDGE/EVDO
TDD_LTE: 38/39/40/41
FDD_LTE： 1/2/3/4/5/7/8/12/17/19/20/26
TD-SCDMA: 34/39
WCDMA ： B1/2/4/5/8
C2K : BC0
GSM ： B2/3/5/8

Battery

The large 4200mAh battery gives the Vernee Active a long life. Due to many optimized functions, it can be on hold up to 580 hours. When used daily outdoors, the battery can last 2.5 days. A smart key has been placed on the left side of the Vernee Active. Pressing it will quickly enter the resistance mode and the waiting times will be extended to 620 hours. Depending on the situation, you can easily control the energy consumption and the time of use.

For more informatio please visit Vernee Active.

Youtube review

Do not mirror my builds! Please post a link to this page instead.

http://konstakang.com/devices/cube_iwork8ultimate/TWRP

Prerequisites:
1. Download and install Intel Android USB driver (Windows) or setup udev rules (Linux).
2. Download and install Android SDK tools and platform-tools to get adb and fastboot.

Unlocking the bootloader:
1. Enable developer settings by clicking 'Settings -> About tablet -> Build number' several times. Enable 'Settings -> Developer options -> OEM unlocking' (not sure if necessary) and 'Settings -> Developer options -> Android debugging'.
2. Plug in your device via USB cable and open terminal window as an administrator (Windows). Boot device into bootloader by executing

adb reboot bootloader

You can also boot to bootloader by holding volume down button in dual boot menu and selecting to boot to Android.
3. Execute in terminal

fastboot oem unlock

Menu appears on the device warning that unlocking the bootloader will erase the device. Use volume keys to select the option to approve and use power key to confirm. It will try to format the data partition but fails because the bootloader is pretty useless (see below). Bootloader will be unlocked, though.

Notes about the bootloader:
Android bootloader is not working properly because of how Windows partition are named (not prepended with 'android_' what the bootloader expects). You can see a warning message when booted to bootloader and some bootloader functions are not working properly. You can't use fastboot to flash any image! Good thing is that you can still use fastboot to boot images. It also possible to fix this by booting the tablet to Windows and use something like 'GPT fdisk' tool to rename the Windows partitions (add 'android_' prefix). This is not absolutely necessary though if you're not planning to use fastboot to flash images.

Installing TWRP:
1. Download both TWRP recovery image and TWRP flashable zip from this post. Save the TWRP flashable zip to your device's sdcard. Save the TWRP recovery image to a place you can access in terminal window.
2. Change into the directory you saved the TWRP recovery image, boot to bootloader as above, and execute

fastboot boot recovery-twrp3020-cht_cr_mrd.img

3. Install TWRP flashable zip from sdcard once booted to TWRP.
4. Reboot recovery.

You can boot to TWRP by executing 'adb reboot recovery'. It's also possible to boot to recovery by booting to bootloader first (as above), using volume keys to select 'recovery' option and using power key to confirm.

If you've renamed Windows partitions (see above), you can use 'fastboot flash recovery recovery-twrp3020-cht_cr_mrd.img' to install the recovery image.

Stock ROM is encrypted by default which means data partition is not accessible in TWRP before you format it (select 'Wipe -> Format Data' - doing a factory reset is not enough). Important! This will erase your data including internal sdcard. It's recommended to do this once when installing dm-verity disabled/unencrypted boot image or flashing a custom ROM (CyanogenMod, Remix OS).

How to restore stock recovery:
1. Download zip below suitable for your device and copy it to your device's sdcard.
2. Boot to TWRP recovery.
3. Install zip in TWRP.
4. Reboot recovery.

http://konstakang.com/devices/cube_iwork8ultimate/stock-recovery

Sources:

• Device

Prerequisites:
You need to have the latest stock firmware and TWRP recovery installed. See 'Settings -> About Tablet' on your device and choose the file that matches your stock firmware version. Important!!! Do not install these files on mismatching firmware versions!

Supported stock firmware versions:
Vi10 Plus & Hi10 Plus: Remix OS B2016080801
Vi10 Plus: stock Android 20160803
Hi10 Plus: Remix OS B2016092601
Hi10 Plus (z8350): Remix OS B2016092102
Hi10 Plus (z8350): Android 20161108
Hi10 Pro: Remix OS B2016081102
Hi10 Pro: stock Android 20161102
Hi10 Pro (z8350 - serial no HQ64): Android 20161208
Hibook: stock Android 20160422
Hibook Pro: stock Android 20160906
Hibook Pro: stock Android 20161025

How to disable dm-verity:
1. Download zip below suitable for your device and copy it to your device's sdcard.
2. Boot to TWRP recovery.
3. Install zip in TWRP.

http://konstakang.com/devices/chuwi_vi10plus/stock-disable-dmverity

How to gain root access in Android:
1. Disable dm-verity (see above).
2. Download SuperSU zip and copy it to your device's sdcard.
3. Boot to TWRP recovery.
4. Install SuperSU zip in TWRP.

I tried xposed-rootcloak but sees  warning:"Verified boot (DM verity) prevents the device from booting if the system partition is modified. Installing Xposed is not recommended."

I stopped there so as not to risk bricking the device.

I am not looking to root the device, just want to run some apps that detects and prevents rooted devices from running the app.

Thanks in advance!

Some discussion pages for the device

http://forum.xda-developers.com/showthread.php?t=2419808

http://forum.xda-developers.com/showthread.php?t=2234265    

http://forum.zopomobileshop.com/forum.php?mod=forumdisplay&fid=37&filter=typeid&typeid=15
 

Rooting the device
(There are different mtk6589 root procedures out there. Attempt at your own risk. I'm not responsible for any damage you make on your phone)

http://forum.zopomobileshop.com/forum.php?mod=viewthread&tid=337&fromuid=13412

http://forum.xda-developers.com/showthread.php?t=2130276

OEM ROMS

http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom


Custom ROMS
(beware that there are two versions of the phone. A normal and a B version)

http://www.needrom.com/phone-roms/zopo/zp980h-c2/

http://www.needrom.com/phone-roms/zopo/zp980/

http://www.needrom.com/phone-roms/zopo/c2/

http://forum.xda-developers.com/showthread.php?t=2408655    




The community around this phone is growing quite fast. Any of you have the phone? Any developers out the interested in the device? Use this thread to discuss and see if we can open a modaco ZOPO "Device Specific - Android Phones" folder.

Any questions (if I can answer), feel free to ask.

Any ideas on mods and ROMs that might help? Is the Fusion5 known as something else which might suddenly reveal more options? A quick Google doesn't turn up much definite info.

All help massively appreciated to squeeze some more power out of this rather nice underdog device.

As a camera it sounds decent, and apparently it is Vanilla Android underneath, Android 6.0 still gets security updates, so hopefully it is regularly patched.

Curious who I should ask for a kernel source

Note:
This solution will work on any 32 GB tablet. the trick is the gpt.bin file.
After the operation, be patient because the tablet will restart several times, then wait
Charge your tablet at least 60%
Note the responsibility and consequences of this is at your own risk
**This link (frimware) is my personal server, please Other friends Upload Center upload because after a while I removed**
Thanks to the users: Allember

gpt_2.rar

Cubot sent me an email explaining how to update.

I also follwed this site to update: http://vondroid.com/threads/download-android-kitkat-4-4-2-stock-firmware-for-cubot-s208-smartphone.29105/#.VMwMo2isUjl

Delete this topic please

For the Spark or Spark + SW21-WF-PORRIDGE-CM-13.0.5-ZNH0EAS9KB-RECOVERY.zip

For the Spark X WF-PORRIDGEK-CM-13.0.5-ZNH0EAS9KC-RECOVERY.zip

For the Swift if you find you are on 12.1 Cyanogen OS cm-13.0-ZNH0EAS2NH-crackling-signed-9c92ed2cde_recovery.zip and then SW27-WF-CRACKLING-CM-13.1.5-ZNH2KAS7EB-RECOVERY.zip

For the Storm cm-13.1.2-ZNH2KAS4YE-kipper (recovery).zip for 12.1 Cyanogen OS and then SW23-WF-KIPPER-CM-13.1.5-ZNH2KAS7EC-RECOVERY.zip

For the Swift 2 / 2 Plus or 2X SW33-WF-MARMITE-CM-13.1.5-ZNH2KAS7EB-RECOVERY.zip

After downloading the updates and getting to the final Cyanogen OS version, the Wileyfox updater should prompt you to download the TOS Android Nougat release.

If it does not, here is the SD Card update documentation:

Wileyfox SD Card update documentation

Any issues SHOUT!

Device Source

download for Build 27112017

Thanks:

• Lineage OS team & everyone who's still working on 13.0