STEP 1 Download usb drivers here below

http://developer.motorola.com/docstools/US...r/?pubid=987654

STEP 2 Download the debranded Firmware here (note you can also use the uk one with motionblur its your choice for debranded use the RUTEM_U3_01.14.2 Central Europe

http://and-developers.com/sbf:ruth#bootloaders

STEP 3 Download RDSLite Latest is v4.5.3 here below

http://www.motorolafans.com/forums/a1200-a...nload-here.html

STEP 4 Install the USB Drivers and the RDSLite program and reboot PC

STEP 5 Extract the firmware file you downloaded a while ago to c:\Program files\Motorola\RSDLite place the folder you extracted there.

STEP 6 Start the RSDite program now where it says filename press the select area and find the downloaded firmware in c:\Program files\Motorola\RSDLite and select the (sbf) file some details will apear on the right hand side.

STEP 7 Now power down your phone and press the up button on the dpad and press the power button for 4 seconds and release the power button only you should see a bootmenu displayed reading the boot vershion and a simple battrey check etc.Now plug in your usb cable it should start loading usb driver wait for it to finish and your ready you should see where it says (port type) your usb connected in RDS Lite this means your ready to flash.

STEP 8 Press the start button on the RDS Lite and just relax while your device gets flashed,debranded etc. you will see a progress status on the right hand side wait till it reaches 100% but please do not disconect it will reboot the phone automaticly and restart the phone.And just wait untill android comes up and fully running untill you disconnect it should read (PLEASE START PHONE MANUALY) on RDS Lite when this shows it is safe to unplug.

STEP 9 Hopefully you now have a debranded phone and or unbricked your phone if it all went wrong for you please read carfully word by word and try the procedure again thankyou and enjoy.

 

 

While Google has not yet publicly released Android Lollipop, we are happy to confirm that the upgrade will come to:

• Moto X (1st Gen. & 2nd Gen.)
• Moto G (1st Gen. & 2nd Gen.)
• Moto G with 4G LTE
• Moto E
• Droid Ultra, Droid Maxx, and Droid Mini

Moto E is getting Lollipop.

The Network Unlock Code can be found online for only £3.

This is a device which has not seen a lot of traction on MoDaCo, but the bootloader can be unlocked, and the kernel source is readily available.

MoDaCo may give the Moto E it's own forum if there is enough interest.

This works out to about £96 at the time of this post.

£79.95 locked to o2.

We need a new forum for this phone.

It will get android 4.4.3 update soon and will get atleast 1 major update too i.e android 4.5

is anybody know if there's a MIUI for Droid 4?

Remember to backup your rom

about:

This aio tool will bring all tools into one place

things that this AIO tool dose

Options For Hacks

* Root with motofail2go_razri by @djrbliss

* Unlock bootloader for newbies

* Unroot

* Enable init.d

* Remove init.d

Options For Sdcard

* Swap Sdcards

* Stock Sdcards

Options for Build.prop Mods for Games on market

* Build Samsung s2

* Build Moto Stock

Options for LCD Density Modd

* Density 240

* Density 250

* Density 260

* Density 270

Options for other Mods

* Enable 3g mode only in settings

how can i use the aio tool

* Extract active anywere you like

* Make sure your phone is connected to pc

* Run Razr i tools

* it will install a adbd hack look for a new app on your phone

* Select both boxes

* remove phone form pc then plug back it

* Select a option

how can i use the aio tool bootloader unlocker

* Select option 2 aio tool will show you your unlock key

* aio to will open you internet explorer to goto moto unlock site

* Enter your unlock code you got form aio tool on motorolas web site

* once you get your unlock code enter it into aio tool it will do the rest for you

changelog

(1)added enable 3g mode

(2) added unlock bootloader

Download

Get it here

Get it here <--------old

Any ideas?

with this modded settings.apk you can enable mass storage

you will get 3 opinions in status bar one new one

works on deodex and odex roms

copy to sdcard and move to system/app and set permissions to rw-rw-r

reboot

or you can use adb

adb remount

adb push settings.apk system/app

adb reboot

download here http://db.tt/jkooH36D

I have a cell phone of the Motorola XT926 model Rarz Maxx Verizon Hd

There are some Room to be 4.2 and also remove the motorola interface and have the issue of google stock.

Been looking through the forum but can not find it

thanks

John

root@smi:/ # df

df

Filesystem             Size   Used   Free   Blksize

/dev                   484M    76K   484M   4096

/system                  1G   734M   469M   4096

/cache                 629M    10M   619M   4096

/data                    5G   640M     4G   4096

/pds                     7M     4M     3M   4096

/mnt/asec              484M     0K   484M   4096

/mnt/obb               484M     0K   484M   4096

/mnt/sdcard             14G     8G     6G   32768

[/code]
[u][b]


Things working are : [/b][/u]

(1) Media Transfer Protocol 

(2) External SDcard being mounted to /sdcard

(3) /data/media is no longer used as /sdcard

(4) Working after reboot


[u][b]How Too use : [/b][/u]

(1) Extract to desktop

(2) Ensure USB debugging is enabled and phone is connected to pc

(3) run run.bat 



Download for unlocked bootloaders here 


Download for locked bootloaders here 

looks very promising if development goes well we will be looking at a howler of a phone

Coach purses Outlet

Coach Outlet Online

This is my first Android phone. Is there another rooting method I should be using?

Dick

But i spent a lot of money in my Razr and it have wifi problem...

too weak signal, seems like every droid razr in my country have this problem... anyone have the same?

some help?

thanks in advance

Anyone have any ideas about custom ROMS and modding it? Since Motorola aren't updating 2.1 does anyone know if it's possible?

Thanks

Please share It! :rolleyes:

Check this page for info on unlocking Motorola BackFlip.....

http://www.instructables.com/id/How-to-Unl...otorola-Phones/

If you are on Orange PAYG, don't forget to check your current Phone Fund - found I had £11 towards a new PAYG mobile :( Won't be picking up a DEXT myself as my new Pulse arrived last week!

Orange Pay-As-You-Go Shop

(Sorry - can't find a way to link directly to the phone...)

UPDATE 02/05/2011

Blur Launcher Added back by request (Blur widgets now working)

ADWLauncher Removed

Button Lights Fixed

MusicMod Lockscreen moded added

Blur music controls in locksreen tweaked a little (make sure Music Mod lockscreen is stopped)

system apps zipaligned(in case you wanted to do it again..)

Boot.img removed from nandroid (doesn't restore, flash 3.12 Brazil if you are running an older build)

Some scripts cleaned up

Etc

Version 2.0 is in the work based on 3.23, now with full traslation.

Download Here

Argen2stone 1.9

IF YOU WANT TO MIRROR IT, PM ME THE LINK, SO I CAN TRACK THE DOWNLOAD COUNTS WITH MY BIT.LY ACCOUNT, Dropbox mirrors are not allowed

UPDATE 20/04/2011

Blur Launcher removed

ADW Launcher 1.3.6 ported from latest CM7 released (nadlabak's fixes included)

Added back some apks to get Motoblur social accounts working again(requested)

CM7 MMS replaces blur text messaging. Messaging moded redirected to CM7's MMS

MusicMod Lockscreen ported for Music from Argen2stone. Enable/disable the service in app drawer

Buil.prop changes:

windowsmgr.max_events_per_sec -> 65 scrolling optimized

dalvik.vm -> 48m stability

ro.mot.hw.dispbl.anim -> 1 Instant screen off with power key locking the phone

slow fps set to 90

ro.romversion increased to 3

debug.sf.hw -> 1 enables HW acceleration, better UI experience

Changes in scripts:

loaded smartass scaling governor

loaded conservative scaling governor

conservative governor set on boot as it is configured on init scripts.

sdcard read speed fix applied to init.rc loaded on boot

THIS NANDROID CONTAINS BOOT.IMG TOO, COMPATIBLE FOR ALL PHONES WITH OLDER BUILDS. AFTER RESTORING THE SYSTEM NANDROID GO TO ADVANCE RESTORE AND

CHOOSE RESTORE BOOT.IMG, AFTER APPLYING IT REBOOT. IF YOU GOT STUCK ON M LOGO MORE THAN 3 MINS, PULL YOUR BATTERY OFF, TURN ON, AND CHOOSE "REBOOT" IN CWM

Link: Argen2stone 1.8

Mirrors:

Argen2stone18ByChibani

Argen2stone18ByEvealex624shared

Mirrors are welcome

UPDATE 30/03/2011

Changelog:

-Deodexed again, with full Brazil apks.

-Added back 3G Hotspot and DLNA

-New theme BLURRED preinstalled, you can find it on the theme menu too. Based on Gingy's DX

-Gingerstone Rebuilt and moded music control lockscreen

-Honeystone with minor changes

-New bootanimation Honeycomb takeover, found here on XDA

-Bootsound preinstalled and enabled -> Tron Theme music

-2nd-init hack applied

-Folder init.d Liberty ROM's scripts ported 98% of them

-Script roottools updated:

*added Blurred to theme list, new options to enable/disable bootsound and change fps for fastmo an slowmo video recording on "set build properties"

*new option adjust init scripts:

-This menu is meant to make easier the config of init.d.conf(controller of init.d located on /data/liberty, so if you mess something just wipe):

-Dalvik VM Size*

-Enable clear cache on boot

-Change ring delay*

-Enable script firstboot on boot

-Enable fix permissions on boot

-Change WiFi scan period*

-Enable editprops on boot (this applies the values marked with * to build.prop )

-Set minimum memory (RAM)

-Change LCD density*

-Enable better scrolling speed*

-Enable overclock on boot (set the scaling in option 14)

-Black screen phone delay*

-Enable CWM on boot (choosing reboot you boot normally after the reboot to CWM)

-Adjust custom scaling frequencies (use the Stock vsel in table if you dont have idea)

-zipalign system apps on boot

-zipalign data apps on boot

*new option to download and change bootsound: currently 16...

-libs for MP3 playback changed with DX's thanks to Deadsix17

-Music player from Droid X visuals(100+ presets), audio effects and music control on lockscreen

-MusicMod apk is renamed to music.bak if you liked it on 1.0, doesn't support visuals, audio effects nor music controls on lockscreen

-build.prop fixed to show all your installed apps from the Market (thanks Jrummy)

-bash added to bin, type bash in terminal to start

-roottools symlinked, type allinone to skip download of latest roottools and start the menu

-Interactive Governor working. ONLY available with Overclock on boot enabled(any scaling).

-ro.modversion line added to build.prop, useful when i add updates for the rom via roottools

-more stuff i dont remember

Apply the same way as 1.0 and enjoy

Note: motoginger, blackdroid and gingerblue were not updated, but you can try them.

LINK: Argen2stone v1.5

Source: GrupoAndroid.com

have to buy £20 top up, but is it a bargain?

i have debranded my flipout, folowing the tutorial but still I can't use my sim in another network... can someone give me a free option ? thanks !

Worked perfectly, now if I only could find a decent ROM for the M2... :P