Mobile Phone Codes

[Guest jutley]

Hi Everybody!

Here is a list af all codes of LG RD 2030, as i know:

1. 2539** => Lets u to enter AKEY ( if u go inside and dont enter AKEY, ur

mobile will automatically restart).

2.

3. dial any no then press key then press key , ur mobile will

automatically restart saying "msccup.c 0160"

4. write a message "ODM " and send to 3737

u will receive a message saying ur mobile Activation date.

Techie experts...in older version R23REL11 by judt dialing 951753951753 we can enter to service menu.

Thats all.

if anybody knows extra, please tell.

Hello, I have managed to collect some information for these phones.

Samsung

All type of phones (old modeles):

NAM programming: 47*869#08#9

Test mode: *759#813580 or 5809540*45680

exit test mode - 02

A-Key: menu + 0, code 25##

Method for using

*759#813580

this code enters u into a testmode.(from here u can change phones setting directly if it is available in menu or not sound interesting Na)

then after u can press any two digit code

if u entered wronge digit press # at any time to cancel.

Step 1) enter *759#813580

Step 2) press #

Step 3) press 25 (for backlight On)

Step 4) press #

Step 5) press 70

Step 6) press 153 (which replace old value here u can remember that value and type it back if u want to revert)

Step 7) Press SMS Menu key(right soft key) this will store new settings

Step press #

Step 9) press 02 (for restart the phone)

step 3 and 4 are needed when u r in dark as ones u enter *759#813580 lights goes off

if you want to increase battery life

*759# 813580 70 (press) cancel 153 (then press) SMS ( button on top right) 02 and SMS . C ya ALL bye .

Samsung A500

1. Enter ## and the 6 digit OTKSL

2. SERVICE MENU will appear and 1.Basic will be highlighted

3. Press OK

4. Device will display NAM CDMA/ Phone Number

5. Enter 10 digit MIN

6. Press OK (3 times)

7. Display will return to Service Menu. Press END.

8. Programming is complete

Samsung N240 and N400

1. Enter ## and type in the 6 digit OTKSL

2. The display will show SVC MENU and 1. Phone Number

3. Press OK

4. Enter the 10 digit MIN and press OK

5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)

6. Press OK

7. The display will return to the SVC MENU

8. Press END to complete the programming

Samsung Uproar

1. Press MENU key

2. Enter 9 2 0

3. Enter the OTKSL

4. At SVC Menu screen press OK

5. Enter MIN and press OK 4 times

6. Enter SID (4654) and press OK

7. Press END key

8. Programming is complete

Samsung N300

1. Press ## followed by the OTKSL

2. SVC menu will be displayed

3. Press 1 for Phone #

4. Enter the 10 digit MIN and press OK

5. MIN that was entered will be displayed press OK

6. SVC Menu will display press 3 for NAM

7. Enter the 4 digit Home SID press OK

8. Press END and handset will power cycle

Samsung i300

1. Tap on the Phone Icon with stylus

2. Press #907*9#0 ENTER LOCK should appear on screen

3. ENTER OTKSL

4. SVC MENU will appear press 1

5. Enter 10 digit MIN and then press SAVE

6. Press SAVE again

7. Press 3 and then press SAVE 6 times

8. Enter the HOME SID and press SAVE once

9. Press END key twice

Samsung A400 and A460

1. Enter ## and OTKSL

2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)

3. Enter 10 digit MIN and press OK

4. At 1.Basic Menu press the END key

5. Handset will power cycle

Samsung 3500 8500 6100 N200

1. Press MENU

2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)

3. Enter OTKSL

4. Press 1 at SVC MENU Screen

5. Enter MIN and press OK

6. Press OK 4 times

7. Enter SID (4654) and press OK

8. Press END key

9. Programming is complete

Qualcomm

QCP-800 programming: menu + 3 + 0.

SPC: "000000" or may be other SPC typed by user.

QCP-820/1920/2035: type "111111" and press Jog Dial.

Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.

QCP 1960 and 2760

1. Press softkey under the work MENU

2. Press 8 0

3. Enter the OTKSL

4. Press softkey for OK

5. Enter MIN and press softkey for OK

6. No SID is require for this handset

7. Press softkey for EXIT

8. Programming is complete

LG

LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user

A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key

LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.

A-Key: type 2539** and enter A-key

LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.

A-Key: type 2539** and enter A-key

LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.

A-Key: type 2539** and enter A-key

LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. Scroll to MIN and press OK

5. Enter 10 digit MIN scroll to SAVE and press OK

6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)

7. Enter SID (4654) and scroll to SAVE and press OK

8. Programming is complete

LG5350

1. Enter ## and enter the OTKSL and press the left soft key under the word

[Guest jutley]

These are the d600 codes:

*2767*688# = Unlocking Code

*#8999*8378# = All in one Code

*#4777*8665# = GPSR Tool

*#8999*523# = LCD Brightness

*#8999*3825523# = External Display

*#8999*377# = Errors

#*5737425# = JAVA Something{I choose 2 and it chrashed}]

*#2255# = Call List

#*536961# = Java Status Code

#*536962# = Java Status Code

#*536963# = Java Status Code

#*53696# = Java Status Code

#*1200# = AFC DAC Val

#*1300# = IMEI

#*1400# = IMSI

#*2562# = ??? White for 15 secs than restarts.

#*2565# = Check Blocking

#*3353# = Check Code

#*3837# = ??? White for 15 secs than restarts.

#*3849# = ??? White for 15 secs than restarts.

#*3851# = ??? White for 15 secs than restarts.

#*3876# = ??? White for 15 secs than restarts.

#*7222# = Operation Typ (Class C GSM)

#*7224# = I Got !! ERROR !!

#*7252# = Oparation Typ (Class B GPRS)

#*7271# = Multi Slot (Class 1 GPRS)

#*7274# = Multi Slot (Class 4 GPRS)

#*7276# = Dunno

#*7337# = EEPROM Reset (Unlock and Resets WAP Settings)

#*2787# = CRTP ON/OFF

#*3737# = L1 Dbg data

#*5133# = L1 Dbg data

#*7288# = GPRS Attached

#*7287# = GPRS Detached

#*7666# = SrCell Data

#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)

#*7284# = Class : B,C or GPRS

#*2256# = Calibration Info

#*2286# = Battery Data

#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)

#*2679# = Copycat feature (Activate or Deactivate)

#*3940# = External loop test 9600 bps

#*4263# = Handsfree mode (Activate or Deactivate)

#*4700# = Half Rate (Activate or Deactivate)

#*7352# = BVMC Reg value

#*8462# = Sleeptime

#*2558# = Time ON

#*3370# = EFR (Activate or Deactivate)

#*3941# = External looptest 115200 bps

#*5176# = L1 Sleep

#*7462# = SIM phase

#*7983# = Voltage/Frequenci (Activate or Deactivate)

#*7986# = Voltage (Activate or Deactivate)

#*8466# = Old time

#*2255# = Call ???

#*5187# = L1C2G trace (Activate or Deactivate)

#*5376# = ??? White for 15 secs than restarts.

#*6837# = Official Software Version

#*7524# = KCGPRS

#*7562# = LOCI GPRS

#*7638# = RLC allways open ended TBF (Activate or Deactivate)

#*7632# = Sleep mode Debug

#*7673# = Sleep mode RESET

#*2337# = Permanent Registration Beep

#*2474# = ???

#*2834# = Audio Path

#*3270# = DCS support (Activate or Deactivate)

#*3282# = Data (Activate or Deactivate)

#*3476# = EGSM (Activate or Deactivate)

#*3676# = Flash volume formated

#*4760# = GSM (Activate or Deactivate)

#*4864# = Dunno doesn't work on newer versions

#*5171# = L1P1

#*5172# = L1P2

#*5173# = L1P3

#*7326# = Accessory (I got Vibrator)

#*7683# = Sleep variable (

#*7762# = SMS Brearer CS (Activate or Deactivate)

#*8465# = Time in L1

#*9795# = wtls key

#*2252# = Current CAL

#*2836# = AVDDSS Management (Activate or Deactivate)

#*3877# = Dump of SPY trace

#*7728# = RSAV done# (Everything went to standart but nothing was deleted)

#*2677# = ARM State (None or Full Rate)

*#8999*636# = Have no clue what it is, i see 20 lines

*#9999# = Software version

*#8999*8376263# = HW ver, SW ver and Build Date

*#8888# = HW version

*#8377466# = Same HW/SW version thing

*#7465625# = Check the locks

*7465625*638*Code# = Enables Network lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

Posted 22:04 16 Feb 06 by moizeshah (student)

moizeshah

22:06 16 Feb 06

23 Posts

student

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*27*Code# = Disables CP lock

*7465625*746*Code# = Enables SIM lock

#7465625*746*Code# = Disables SIM lock

*7465625*228# = Activa lock ON

#7465625*228# = Activa lock OFF

*7465625*28638# = Auto Network lock ON

#7465625*28638# = Auto Network lock OFF

*7465625*28782# = Auto subset lock ON

#7465625*28782# = Auto subset lock OFF

*7465625*2877# = Auto SP lock ON

#7465625*2877# = Auto SP lock OFF

*7465625*2827# = Auto CP lock ON

#7465625*2827# = Auto CP lock OFF

*7465625*28746# = Auto SIM lock ON

#7465625*28746# = Auto SIM lock OFF

*2767*3855# = E2P Full Reset

*2767*2878# = E2P Custom Reset

*2767*927# = E2P WAP Reset

*2767*226372# = E2P Camera Reset

#*6420# = MIC Off

#*6421# = MIC On

#*6422# = MIC Data

#*6428# = MIC Measurement

#*3230# = Trace enable and DCD disable

#*3231# = Trace disable and DCD enable

#*3232# = Current Mode

#7263867# = RAM Dump (On or Off)

*2767*49927# = Germany WAP Settings

*2767*44927# = UK WAP Settings

*2767*31927# = Netherlands WAP Settings

*2767*420927# = Czech WAP Settings

*2767*43927# = Austria WAP Settings

*2767*39927# = Italy WAP Settings

*2767*33927# = France WAP Settings

*2767*351927# = Portugal WAP Settings

*2767*34927# = Spain WAP Settings

*2767*46927# = Sweden WAP Settings

*2767*380927# = Ukraine WAP Settings

*2767*7927# = Russia WAP Settings

*2767*30927# = GREECE WAP Settings

*2767*73738927# = WAP Settings Reset

*2767*49667# = Germany MMS Settings

*2767*44667# = UK MMS Settings

*2767*31667# = Netherlands MMS Settings

*2767*420667# = Czech MMS Settings

*2767*43667# = Austria MMS Settings

*2767*39667# = Italy MMS Settings

*2767*33667# = France MMS Settings

*2767*351667# = Portugal MMS Settings

*2767*34667# = Spain MMS Settings

*2767*46667# = Sweden MMS Settings

*2767*380667# = Ukraine MMS Settings

*2767*7667#. = Russia MMS Settings

*2767*30667# = GREECE MMS Settings

*335# = Delete all MMS Messages

*663867# = Dump Mm file

#*536961# = WAPSAR enable / HTTP disable

#*536962# = WAPSAR disable / HTTP enable

#*536963# = Serial eable / Others disable

#*53696# = Java Download Mode

#*5663351# = WAP Model ID [Your Model]

#*5663352# = WAP Model ID [sEC-SGHXXXX/1.0]

#*566335# = WAP Model ID [sEC-SGHXXXX/1.0]

*2767*66335# = Check on which model it is

*2767*7100# = SEC-SGHS100/1.0

*2767*8200# = SEC-SGHV200/1.0

*2767*7300# = SEC-SGHS300/1.0

*2767*7650# = Nokia7650/1.0

*2767*2877368# = Reset WAP Model ID to standart

[Guest jutley]

Phone codes for Nokia

These Nokia codes will work on most Nokia Mobile Phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these codes.

Code Function

*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time

*#4720# Deactivate Half Rate Codec

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type

*#9999# Phones software version if *#0000# does not work

*#06# For checking the International Mobile Equipment Identity (IMEI Number)

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

*#147# This lets you know who called you last (Only vodofone)

*#1471# Last call (Only vodofone)

*#21# Allows you to check the number that "All Calls" are diverted to

*#2640# Displays security code in use

*#30# Lets you see the private number

*#43# Allows you to check the "Call Waiting" status of your phone.

*#61# Allows you to check the number that "On No Reply" calls are diverted to

*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to

*#67# Allows you to check the number that "On Busy Calls" are diverted to

*#67705646# Removes operator logo on 3310 & 3330

*#73# Reset phone timers and game scores

*#746025625# (or: *#SIM0CLOCK#) Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible

*#7760# Manufactures code

*#7780# Restore factory settings

*#8110# Software version for the nokia 8110

*#92702689# (or: *#WAR0ANTY#) Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again

*#94870345123456789# Deactivate the PWM-Mem

**21*number# Turn on "All Calls" diverting to the phone number entered

**61*number# Turn on "No Reply" diverting to the phone number entered

**67*number# Turn on "On Busy" diverting to the phone number entered

12345 This is the default security code

press and hold # Lets you switch between lines

[Guest awarner (MVP)]

Quite a list you have, nice work ;)

[Guest Tech]

dont understand how you can increase the battery life just by typing in some code - probably a "shortcut" or something to disable the IR beams/bluetooth