Guest sonora Posted February 2, 2009 Report Share Posted February 2, 2009 (edited) Follow step by step instructions below. Operating system requirements: * Microsoft XP 32 bit version. Please note: I have successfully updated mine using XP 32 bit version and it works flawlessly. I have not tried the updater on XP 64 bit version and Vista 32 bit version, however I tried on Vista 64 bit version but it did not recognise the Vista updater. Software requirements: * ActiveSync 4.5 File name: setup.msi Download: http://www.microsoft.com/windowsmobile/en-...px?ProductID=76 * Samsung Updater select Country: Singapore and Operating System XP File name: i900DZHK3_updater_xp Download: http://www.samsungmobile.com/support/omnia/index.jsp * PHM Registry Editor Version 0.70 File name: regedit.mrln_arm.cab Download: http://www.pspmyspace.com/omnia/2008/12/ph...ersion-070.html ATTENTION! * Backup all your data first before updating. * Ensure phone battery is fully charged. * If using laptop switch main power on. * Do not unplug cable or do anything while the phone is updating. * Flashing may kill your phone and void the warranty, DO IT AT YOUR OWN RISK!!! Lets get started! 1). Install ActiveSync 4.5 into your computer/laptop from the supplied CD that comes with the phone or download if you haven't done it. 2). Connect your device to computer/laptop via USB and the ActiveSync will immediately recognise your device. A. If you bought your phone from Singapore then all you need to do is download the updater of the respective country, it will work right away. If from other countries, you will get "Incorrect Software Version" message when trying to update. To change preconfiguration settings: * Press the "dial" key to the left of the optical pad to bring up the dialer * With the onscreen keypad input *#1546792*# * Select 'Preconfiguration' * Enter code *#81230*# and select OK * Select "Singapore" with the default operator SingTel * Accept this, DEVICE WILL HARD RESET B. After hard reset, place regedit.mrln_arm.cab in my storage or any folder you can remember where you put it then using File Explorer find the cab file, tap to install. Run PHM Registry Editor GO TO HKCU\Control Panel\Version\CustomVersion Change the version to DZHH1 tap OK. 3). A. Install the updater double click it, on the updater screen you tick the 2 boxes then click the verify device and omnia will download all the necessary files and flash itself. Everything will run by itself. You just need to wait, everything else just follow the instruction shown on your monitor or omnia. B. Change back preconfiguration settings of your country or you may leave it as is for future updates after you had successfully updated your device just follow step 2A. Check if you have the latest firmware: Go to Settings>System>Version Your device version should now reads: PDA: i900DXHK3/DZHK3 Phone: i900DXHK3 Congratulations! Edited February 4, 2009 by sonora Link to comment Share on other sites More sharing options...
Guest mnakaie Posted February 4, 2009 Report Share Posted February 4, 2009 Thank you, Ill try it soon Link to comment Share on other sites More sharing options...
Guest Chris64 Posted February 8, 2009 Report Share Posted February 8, 2009 Step 2B, 3A and 3B are not in the Paul`s post dude Working good. Thanks. Link to comment Share on other sites More sharing options...
Guest Jeroi Posted February 14, 2009 Report Share Posted February 14, 2009 PLZ help. I keep getting stuck with this; PDA Device Found! ------------------------------------------------------------------------------------- PDA Device ready to download! Please Press Start Button if You want to download image now... ------------------------------------------------------------------------------------- PDA 1 starts downloading... Don't plug it out until the label becomes blue!!! ------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------- Step 1. Eboot image Downloading Downloading EBOOT... EBOOT image downloaded. PDA Reboot to download Eboot twice!!! ------------------------------------------------------------------------------------- PDA Device Found! ------------------------------------------------------------------------------------- PDA Device ready to download! ------------------------------------------------------------------------------------- PDA 1 starts downloading... Don't plug it out until the label becomes blue!!! ------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------- Step 1. Eboot image Downloading Downloading EBOOT... EBOOT image downloaded. Step 2. PDA image Downloading Downloading PDA region #1(DISKIMAGE)... PDA Image Length : 120342687 PDA image downloaded. Step 3. Customer image Downloading Downloading CSC... GetSize : 7454720 CSC finished. Step 4. Phone image Downloading Downloading PHONE... Switch USB to Phone Success... Error! PhoneUSB Detect Failed Port Create retry (25) Port Create retry (24) Port Create retry (23) Port Create retry (22) Port Create retry (21) Port Create retry (20) Port Create retry (19) Port Create retry (18) Port Create retry (17) Port Create retry (16) Port Create retry (15) Port Create retry (14) Port Create retry (13) Port Create retry (12) Port Create retry (11) Port Create retry (10) Port Create retry (9) Port Create retry (8) Port Create retry (7) Port Create retry (6) Port Create retry (5) Port Create retry (4) Port Create retry (3) Port Create retry (2) Port Create retry (1) Port Create retry (0) Download failed!! What to do? phone version; PDA: i900DXIA2/OMNIA PHONE: i900DXHK3 I have tried and tried but no luck. Thanks for any input Link to comment Share on other sites More sharing options...
Guest aridoasis Posted February 14, 2009 Report Share Posted February 14, 2009 (edited) ^ ^ ^ @jeroi dude, looks like ur trying to flash one of taril's rom. check out his thread. this problem has happened many times and users have been able to resolve it. Edited February 14, 2009 by aridoasis Link to comment Share on other sites More sharing options...
Guest justpratik Posted February 18, 2009 Report Share Posted February 18, 2009 Follow step by step instructions below. Operating system requirements: * Microsoft XP 32 bit version. Please note: I have successfully updated mine using XP 32 bit version and it works flawlessly. I have not tried the updater on XP 64 bit version and Vista 32 bit version, however I tried on Vista 64 bit version but it did not recognise the Vista updater. Software requirements: * ActiveSync 4.5 File name: setup.msi Download: http://www.microsoft.com/windowsmobile/en-...px?ProductID=76 * Samsung Updater select Country: Singapore and Operating System XP File name: i900DZHK3_updater_xp Download: http://www.samsungmobile.com/support/omnia/index.jsp * PHM Registry Editor Version 0.70 File name: regedit.mrln_arm.cab Download: http://www.pspmyspace.com/omnia/2008/12/ph...ersion-070.html ATTENTION! * Backup all your data first before updating. * Ensure phone battery is fully charged. * If using laptop switch main power on. * Do not unplug cable or do anything while the phone is updating. * Flashing may kill your phone and void the warranty, DO IT AT YOUR OWN RISK!!! Lets get started! 1). Install ActiveSync 4.5 into your computer/laptop from the supplied CD that comes with the phone or download if you haven't done it. 2). Connect your device to computer/laptop via USB and the ActiveSync will immediately recognise your device. A. If you bought your phone from Singapore then all you need to do is download the updater of the respective country, it will work right away. If from other countries, you will get "Incorrect Software Version" message when trying to update. To change preconfiguration settings: * Press the "dial" key to the left of the optical pad to bring up the dialer * With the onscreen keypad input *#1546792*# * Select 'Preconfiguration' * Enter code *#81230*# and select OK * Select "Singapore" with the default operator SingTel * Accept this, DEVICE WILL HARD RESET B. After hard reset, place regedit.mrln_arm.cab in my storage or any folder you can remember where you put it then using File Explorer find the cab file, tap to install. Run PHM Registry Editor GO TO HKCU\Control Panel\Version\CustomVersion Change the version to DZHH1 tap OK. 3). A. Install the updater double click it, on the updater screen you tick the 2 boxes then click the verify device and omnia will download all the necessary files and flash itself. Everything will run by itself. You just need to wait, everything else just follow the instruction shown on your monitor or omnia. B. Change back preconfiguration settings of your country or you may leave it as is for future updates after you had successfully updated your device just follow step 2A. Check if you have the latest firmware: Go to Settings>System>Version Your device version should now reads: PDA: i900DXHK3/DZHK3 Phone: i900DXHK3 Congratulations! i understand and appriciate the way of instruction you have shown. but sorry to say that on my t-mobile uk branded omnia. i am unable to see default operator in preconfiguration . can u help me. Link to comment Share on other sites More sharing options...
Guest dexstar Posted February 24, 2009 Report Share Posted February 24, 2009 Can anyone help me get my phone back from taril rom back to UK vodafone? i am desperate! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now