Jump to content
Ryrzy

Visual Kitchen by Vistang

Recommended Posts

I have a question :

1. Place you OEM files in OEM directory

Should I put this DXID1 OEM from Nicklashidegardto in this folder ?

In this folder is folder OEM_Lang_0409

existing OEM_Lang_0405 ??? (Czech Language)

You added to ROM\XIP folder LangDB. When I cook ROM to different language 0405 Czech do I have to change file inside this directory "bcc99e16-6581-56e6-4886-ea8f477c0fb6.dsm" ?

4. Place you EXT packs in EXT directory : What should I place here ?

I now this is the basic question for you bat how to made bios.exe from bios.bin ?

Please quick manual for i900_EXEcutor.exe ?

Is this right :

1. run i900_EXEcutor (Language-English)

2. tab EXE - Assemble

3. load eboot.nb0_section "where can i find this file ??"

4. load phone.bin_section

5. press bottom GO...

6. please read, where your new_exe_firmware shall be created...

thanks for help

Download an original ROM in your language, extract the exe with i900EXEcutor and you get: customer.csc, pda.bin, eboot.nb0 and phone.bin.

Then extract the pda.bin with i900EXEcutor and you get: SYS, ROM, OEM.

Take the OEM and use it with the SYS in the first post.

Find in \ROM\XIP\OEMXIPKernel\boot.rgu MUIs value and change them with your language code.

Cook your ROM, take the pda.bin and open i900EXEcutor and put pda.bin (cooked), original eboot.nb0 and original customer.csc and if you want also the phone.bin then assemble the ROM and enjoy!!

Share this post


Link to post
Share on other sites

"Find in \ROM\XIP\OEMXIPKernel\boot.rgu MUIs value and change them with your language code." I do it no problem

I have cooked PDA.bin

Where can I download official DXID1 English ?

and PUIE1 ??? (this is the phone part where can i find it and how can I replace it ?)

Is it the problem to extract it from any cooked ROM.exe (eboot.nb0 and original customer.csc) is this same if I extract it from the official ?

For you it`s a basic question for me big help.

Last official with czech language is

i900UHHJ3.exe "WM 6.1 Pro 5.2.20270 (20270.1.3.1) PDA i900BPHJ4-UHHJ3 Phone i900XXHJ1"

--------------------------

My ROM is working thanks all, perfect work. Extract from nick ROM.

I am happy as flea :D :)

Edited by DelBossco

Share this post


Link to post
Share on other sites
"Find in \ROM\XIP\OEMXIPKernel\boot.rgu MUIs value and change them with your language code." I do it no problem

I have cooked PDA.bin

Where can I download official DXID1 English ?

and PUIE1 ??? (this is the phone part where can i find it and how can I replace it ?)

Is it the problem to extract it from any cooked ROM.exe (eboot.nb0 and original customer.csc) is this same if I extract it from the official ?

For you it`s a basic question for me big help.

Last official with czech language is

i900UHHJ3.exe "WM 6.1 Pro 5.2.20270 (20270.1.3.1) PDA i900BPHJ4-UHHJ3 Phone i900XXHJ1"

--------------------------

My ROM is working thanks all, perfect work. Extract from nick ROM.

OK i saw you solved byself!

Good Cooking!!

Share this post


Link to post
Share on other sites
I don't think is a registry problem, because this kitchen doen't check the registry like the sztupy's one..., but i also think that if you download the kitchen and the SYS/XIP and you recoock it must work!

BTW if you have some problem try to use the old kitchen and see what error gives you the BuildOS that checks alltings!

Solved by changing Sys/XIP to 23509.

One more question.

how i can preconf this wake modes?

Do you know anything about how to make the "sleeping" bug problem goes out?

Still waiting for help out there

Thanks Smaury

Edited by Bruno Adler

Share this post


Link to post
Share on other sites

Staff I have this questions: the wifi no working, not appers and the shutting down the backlight that makes me have to do a soft reset. And where do I find the key to the choice of the third screen?

ScreenShot1.jpgScreenShot2.jpgScreenShot1.jpg

Without file icon of wifi No wifi

Share this post


Link to post
Share on other sites
"Find in \ROM\XIP\OEMXIPKernel\boot.rgu MUIs value and change them with your language code." I do it no problem

I have cooked PDA.bin

Where can I download official DXID1 English ?

and PUIE1 ??? (this is the phone part where can i find it and how can I replace it ?)

Is it the problem to extract it from any cooked ROM.exe (eboot.nb0 and original customer.csc) is this same if I extract it from the official ?

For you it`s a basic question for me big help.

Last official with czech language is

i900UHHJ3.exe "WM 6.1 Pro 5.2.20270 (20270.1.3.1) PDA i900BPHJ4-UHHJ3 Phone i900XXHJ1"

--------------------------

My ROM is working thanks all, perfect work. Extract from nick ROM.

I am happy as flea :( :D

How did you solve it?? Did you use the eboot.nb0 and customer.csc from the original rom or from a cooked one??

Share this post


Link to post
Share on other sites

I found this, is it useful ?

http://bbs.xbeta.cn/thread-24444-1-1.html

I have basic question for cookers :

How should I implement 1% battery zylonite_battdrvr.dll and Certs.cab to my ROM ?

I overwrote original zylonite_battdrvr.dll in OEM\OEMDrivers\zylonite_battdrvr.dll\zylonite_battdrvr.dll

and I placed Certs.cab to EXT\ folder

Nothing has changed.

Thanks

Share this post


Link to post
Share on other sites
I found this, is it useful ?

http://bbs.xbeta.cn/thread-24444-1-1.html

I have basic question for cookers :

How should I implement 1% battery zylonite_battdrvr.dll and Certs.cab to my ROM ?

I overwrote original zylonite_battdrvr.dll in OEM\OEMDrivers\zylonite_battdrvr.dll\zylonite_battdrvr.dll

and I placed Certs.cab to EXT\ folder

Nothing has changed.

Thanks

Hello,

delete the folder zylonite_battdrv.dll in Oem Driver. Copy my two folders in Visual kitchen Oem folder. true!!!!!

OEM.rar

Edited by tom131274

Share this post


Link to post
Share on other sites
To change the default Windws application you must go in \BaseApp and open the rgu, then you see different values for different links, for exaple: MSPIMG, MSCALENDAR, MSCLOCK, etc... you must change the "1"="directory" and put the directory to the app you want, for example for MSPIMG instead of "1"="pimg.exe" you can put "1"="\Windows\HTCAlbum.exe"

I don't know...

You have to delete the lnk file related to sharepix and delete the string from the Initflashfiles.dat in \OEM_Lang_0409

Go in the .rgu inside \OEM\OEMDrivers and find [HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome], create a Disable value just like that:

[HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome]

"Disable"=dword:000000FF

7F - disable everything except 'email setup' screen

BF - disable everything except 'password' screen

DF - disable everything except 'complete' screen and the finishing tap

EF - disable everything except 'location' screen

F7 - disable everything except 'pop-up menus' screen

FB - disable everything except 'stylus' screen

FD - disable everything except 'align' screen

FE - disable everything except tap on the first screen

FF - disable everything [displays first 'splash' screen and exits]

Check drivers or try to tap the power button and look if with that it works...

:D

hi

is there a way to disable the whole welcomehead...the screen the "welcomehead.96.png"???

thx

joe

Share this post


Link to post
Share on other sites
How can i port the sys to the omnia?

when i download it from Da_G´s thread at xda-developers?

i hope someone can help me

You have to download SYS and XIP, MUI and DPI.

On Da_G's repository DPIs are in the 0409 MUI rar.

So you have to download only the SYS, not the rollup, and 0409 MUIs (if you want to cook a non-english ROM you must download also your language MUIs)

Take \SYS\SHARED\COMMON, delete SimT_kit and .ROM .VM (if there are).

Open the MUI archive and take: lang folders, DPI 96 and resh240_resv400 folders (if you cook in an other language just take lang from your lang and make sure to don't have duplicates filders with different lang code.

Put allthings in the same dir and call it with the code of the build.

F.E. 28002

Take the MSXIPkernel and put it in a directory with the same name of the SYS one and the put the SYS in \SYS and the MSXIPKernel in \ROM.

I hope it's clear :-)

bye

Share this post


Link to post
Share on other sites
I found this, is it useful ?

http://bbs.xbeta.cn/thread-24444-1-1.html

It's the Monkybape's repository, is like the Da_G's one, but ROM are released in flash.dio, so you have to dump the flash.dio first and then you can port them!

To dump a Flash.dio you must use three tools and three commands, i attach an archive with tools and commands, all credits go to the providers of tools!

Dump_DIO_by_smaury.zip

Share this post


Link to post
Share on other sites

Thanks for your great help smaury

you are the profi ROMmaker

Is it a problem for you to make the manual: how to make the regional ROM in your language by using "Visual Kitchen by Vistang"

and by using http://bbs.xbeta.cn/thread-24444-1-1.html or http://forum.xda-developers.com/showthread.php?t=544445 ?

Which utility to use, how to use it, where can I copy it, where can I copy files, which directory, how to change kitchen?

I should only use these files in my language for my kitchen "ADC_Lang_0405" and DPI/Resolution this "ADC_Lang_0405 Base_Lang_0405_DPI_96_RESH_240_RESV_400"

I downloaded this from DA_g : - 28002 Rollup - All Packages (~200MB)

- Initflashfiles.dat for all languages

- 0405 CSY Czech Česká republika

and from bbs.xbeta.cn admin @ XBETA : - 0405 CSY 28005 and -DPI and RESV Part: 28005_All_DPI_All_RESV

It`s help for many coockers all over the world.

Thanks for your time and help.

Share this post


Link to post
Share on other sites
Thanks for your great help smaury

you are the profi ROMmaker

Is it a problem for you to make the manual: how to make the regional ROM in your language by using "Visual Kitchen by Vistang"

and by using http://bbs.xbeta.cn/thread-24444-1-1.html or http://forum.xda-developers.com/showthread.php?t=544445 ?

Which utility to use, how to use it, where can I copy it, where can I copy files, which directory, how to change kitchen?

I should only use these files in my language for my kitchen "ADC_Lang_0405" and DPI/Resolution this "ADC_Lang_0405 Base_Lang_0405_DPI_96_RESH_240_RESV_400"

I downloaded this from DA_g : - 28002 Rollup - All Packages (~200MB)

- Initflashfiles.dat for all languages

- 0405 CSY Czech Česká republika

and from bbs.xbeta.cn admin @ XBETA : - 0405 CSY 28005 and -DPI and RESV Part: 28005_All_DPI_All_RESV

It`s help for many coockers all over the world.

Thanks for your time and help.

To make a located ROM you just have to follow this tutorial:

You have to download SYS and XIP, MUI and DPI.

On Da_G's repository DPIs are in the 0409 MUI rar.

So you have to download only the SYS, not the rollup, and 0409 MUIs (if you want to cook a non-english ROM you must download also your language MUIs)

Take \SYS\SHARED\COMMON, delete SimT_kit and .ROM .VM (if there are).

Open the MUI archive and take: lang folders, DPI 96 and resh240_resv400 folders (if you cook in an other language just take lang from your lang and make sure to don't have duplicates filders with different lang code.

Put allthings in the same dir and call it with the code of the build.

F.E. 28002

Take the MSXIPkernel and put it in a directory with the same name of the SYS one and the put the SYS in \SYS and the MSXIPKernel in \ROM.

I hope it's clear :-)

bye

Then you change in \ROM\XIP\OEMXIPKernel\Boot.rgu both MUIs value with your MUI code.

To use the Da_G's initflashiles.dat you have to chenge only the first part of your initflashfiles.dat with the Da_G's one!

If you want to port a build from xbeta you have first to dump the flash.dio with the tool i posted and than you take only the SYS, not the OEM and you delete all lang files and DPI and .ROM .VM SimT_Kit, then you put your DPI and MUI, then you take the XIP.bin and you dump it and you take only the MSXIPKernel.

To dump the XIP you can create a batch file on your pc with this text:

cd rom

..\tools\dump xip.bin

cd xip

rd giisr.dll /Q /S

FOR  /f %%a IN ('DIR /a /b *.dsm') DO ..\..\tools\packagebuilder %%a

You put the xip.bin in \ROM and open the batch and it'll be dumped!

Maybe later i'll do a clear tutorial for build porting and located ROM creation, i have just to translate my italina tutorials in english...

I found this. Is it useful ?

DIO_Tools.rar

DIO_Tools.rar

Just use the tools i posted above it's quite the same...

Share this post


Link to post
Share on other sites

Thats very nice of you Smaury!!!Works great without adding thd dll inside the module folders as i paq kitchen that i used.

You forgot to add the file attached in your zip.Took it from another kitchen.So guys add it in Smaury zip and proceed.

Just rename it to .dll (i changed the ext for uploading)

cecompr_nt.cab

Edited by nikosxri

Share this post


Link to post
Share on other sites

I succeed cook ROM in my language 0405 / 041b. From DAG_s

Which file should I place in folder :

Kitchen\ROM\28002\LangDB\ ???

now in this folder bcc99e16-6581-56e6-4886-ea8f477c0fb6.dsm

Kitchen\ROM\XIP\LangDB

now in this folder bcc99e16-6581-56e6-4886-ea8f477c0fb6.dsm

this is right or another ?? where can I find it in my language ??

Thanks

Edited by DelBossco

Share this post


Link to post
Share on other sites

28002 SYS in this post and DAG_s SYS are different

Dag_s SYS included more folders :

BaseAppsModules

BronzeEA

CommonEA

COMPLEXSCRIPT_FONTS

gb18030

LockscreenEA

MediaOSModules

MSIMAR

MSIMAR_DPI_96

MSXIPKernel - copy or move to ROM\28002\ ????

MSXIPKernelLTK - copy or move to ROM\XIP\ ???

NetCF

NonPhone

OSModules

Perf

Riched20_CS

RIL710MUX

RMGR

SIM_TKit - you say erase

SipAR

Webview_CS

WidgetApps

WinCENLS_WWE

xip.bin - erase ?

Edited by DelBossco

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.