Jump to content

Recommended Posts

I'm using iGO8.3. I tried to rescan gps many times but no success. All gps/xtra settings are fine. I also tried to change the port but nothing.

In fact, after a softreset, the hack works perfectly. But after a short standby, iGO and *#1472365# doesn't recognize the gps anymore.

Share this post


Link to post
Share on other sites

I'm using iGO8.3. I tried to rescan gps many times but no success. All gps/xtra settings are fine. I also tried to change the port but nothing.

In fact, after a softreset, the hack works perfectly. But after a short standby, iGO and *#1472365# doesn't recognize the gps anymore.

you mean you type *#1472365# and no result ? nogarder is not appearing ? if igo is losing gps just check it's gps settings. deselect auto, then search for gps module and let it discover gps itself. you are sure you are using right settings on IGO ? i have read that sometimes faultry settigns on IGO lead gps not to be recognised, not lock or lose locking easily.

Share this post


Link to post
Share on other sites

you mean you type *#1472365# and no result ? nogarder is not appearing ? if igo is losing gps just check it's gps settings. deselect auto, then search for gps module and let it discover gps itself. you are sure you are using right settings on IGO ? i have read that sometimes faultry settigns on IGO lead gps not to be recognised, not lock or lose locking easily.

No, nogarder appearing, but no message. (SUPL Flow etc.). iGo is fine. In 'standalone' mode it works pretty well (just spend much more time to find my position).

To use the hack I have to do this: select 'standalone' -> boot -> go to nogarder -> select 'ms-based' -> select 'get position' -> ok (igo and nogarder). BUT, after a standby, igo can't find the gps (it doesn't mean track/find position; igo simply don't 'see' the gps on device) and nogarder don't find my position after 'get position'.

What really intrigues me is why igo can't find the gps on device after a standby, because nothing was changed. Also why nogarder stop to track my position.

I put nogarder running on background (so igo works fine). But it simply drain the battery in few hours.

Edited by Hiroshi.Rio

Share this post


Link to post
Share on other sites

No, nogarder appearing, but no message. (SUPL Flow etc.). iGo is fine. In 'standalone' mode it works pretty well (just spend much more time to find my position).

To use the hack I have to do this: select 'standalone' -> boot -> go to nogarder -> select 'ms-based' -> select 'get position' -> ok (igo and nogarder). BUT, after a standby, igo can't find the gps (it doesn't mean track/find position; igo simply don't 'see' the gps on device) and nogarder don't find my position after 'get position'.

What really intrigues me is why igo can't find the gps on device after a standby, because nothing was changed. Also why nogarder stop to track my position.

I put nogarder running on background (so igo works fine). But it simply drain the battery in few hours.

as far as i understand some problem occured with phone settings. it happened to me once. i just hard reset my phone and build it again with new improved gps settings

Share this post


Link to post
Share on other sites

my last shot: could you post what do you have on your settings at:

HKLM/system/CurrentControlSet/gps intermediate driver/driver/samsung gps hardware

Share this post


Link to post
Share on other sites

my last shot: could you post what do you have on your settings at:

HKLM/system/CurrentControlSet/gps intermediate driver/driver/samsung gps hardware

ok

default - (value not set)

baud - 57600

commPort - COM9:

friendlyName - Samsung GPS Card, version 1.0

inputbuffersize - (4096)

interfacetype - COMM

OUTPUTBUFFERSIZE - (4096)

retrywaitonerror - (10000)

sleeponnodata - (100)

i hope this can help you

Edited by argentinos

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.