Jump to content
gauravv

[UPDATED]Performance Tweaks etc on Android!.

Recommended Posts

Finally i got android running. keyboard is working and i changed the settings for apn. But no internet.

anyone an idea?

Greetz,

I found the problem. The settings posted in the I8000 android faq are wrong. I checked the mobile provider site, and now its working. (hi.nl)

Edited by Bokun23

Share this post


Link to post
Share on other sites
hey i am startet first 02 haret and made the partitions okay!

and when i will install on sd card. i waitand wait more than 10 minutes and he dont will load he hang on...

0052354] (do_exit+0x0/0X634)

[79.632869] r5:0000000 r4:0000000

i know why :D i have use WM 6.1

when you use you must be upgrade to 6.5 and now i can install android.

so and now i will install the newest android but when i install i become a black screen for 30 sec. and my phone restart B)

i search for 2D/3D libs but i dont can find it.

And when i have the 2d/3d libs who í can the put in?

Edited by afrojam

Share this post


Link to post
Share on other sites

Okay now i have download this file

http://o2droid.phj.hu/kernel_19032011.zip (unrar it in root and start haret in o2 folder)

http://code.google.com/p/omnia2droid/downl...mp;can=2&q= (this i put too in the root folder)

http://dl.dropbox.com/u/11700560/o2b2update.tar.gz (and this to)

and now i started haret and wait i, say you what happend...

THX for first

Okay my phone freze now on Kernel panic not syncing: vfs: unable to mount root fs on unknown-block (179,10)

Edited by afrojam

Share this post


Link to post
Share on other sites
Okay now i have download this file

http://o2droid.phj.hu/kernel_19032011.zip (unrar it in root and start haret in o2 folder)

http://code.google.com/p/omnia2droid/downl...mp;can=2&q= (this i put too in the root folder)

http://dl.dropbox.com/u/11700560/o2b2update.tar.gz (and this to)

and now i started haret and wait i, say you what happend...

THX for first

You don't need the updates, just the B7610 kernel update

Share this post


Link to post
Share on other sites

ok 2 days and no SOD's re 46 rocks,, i think i sorted out the sod problem by using the gesture control lock, from the time i have put lock no sod's cans anyone else try it?

Share this post


Link to post
Share on other sites
ok 2 days and no SOD's re 46 rocks,, i think i sorted out the sod problem by using the gesture control lock, from the time i have put lock no sod's cans anyone else try it?

yeah, same case here...

Share this post


Link to post
Share on other sites
No, from the project page go to 'Downloads' and look for the B7610 kernel rev 46

Hey i found your Tutorial for B7610 #

and i have do it

now i have the problem that i am not can using my googlemail because the wlan and my gprs on phone are not there

i`m trying now with the latest update Kernel-B7610-GC-REV46!

if i done it again i need your help :D

then you gotta explain me each step.

and i tell you what i ve tried all the time

THX and greetings

Edited by afrojam

Share this post


Link to post
Share on other sites
Hey i found your Tutorial for B7610 #

and i have do it

now i have the problem that i am not can using my googlemail because the wlan and my gprs on phone are not there

i`m trying now with the latest update Kernel-B7610-GC-REV46!

if i done it again i need your help :D

then you gotta explain me each step.

and i tell you what i ve tried all the time

THX and greetings

Afrojam,

WLAN is not fuctional on B7610 on this moment.

For GPRS set APN. Go to settings, Wireless & networks choose Mobile Network Settings. Then choose Acces Point Names.

Now you see a black screen. Use homekey (between/above call / endcall button) for menu. Choose "Add APN".

Use google to find your provider settings. After putting settings, push homekey again and choose save APN.

You should be on GPRS within a minute.

grtz Erik

Edited by erikcas

Share this post


Link to post
Share on other sites
Afrojack,

WLAN is not fuctional on B7610 on this moment.

For GPRS set APN. Go to settings, Wireless & networks choose Mobile Network Settings. Then choose Acces Point Names.

Now you see a black screen. Use homekey (between/above call / endcall button) for menu. Choose "Add APN".

Use google to find your provider settings. After putting settings, push homekey again and choose save APN.

You should be on GPRS within a minute.

grtz Erik

okay now I have the latest updates and android running ;) Cool THX!!! OKTHX

and now I must go to Settings for configure the GPRS. what do youe mean with APN? OK FOUND IT :D

and how I get to the settings? OKAY!!!

Oh sorry i found it B) but i have a new question

when i am shutdown my phone who can i start android???

and where the key for go back?

i have problems;)

what do you think it will over time give a perfect android for B7610?

Edited by afrojam

Share this post


Link to post
Share on other sites
okay now I have the latest updates and android running ;) Cool THX!!!

and now I must go to Settings for configure the GPRS. what do youe mean with APN?

and how I get to the settings?

Oh sorry i foound it B) but i have a new question

when i am shutdown my phone who can i start android???

After shutdown, the phone will startup in WinMo again. Start android again by going to "My Storage" and run haret.exe :D

Edited by erikcas

Share this post


Link to post
Share on other sites

I installed again with a total clean condition but I don't know why I continue to have freeze or NO wake up condition!!!

Someone can help me?

I formatted SD memory (8GB) as FAT32

Internal memory is divided in the next way:

- 512 MB as default hidden partition with WMO (Louvre) files

- 512 MB FAT32 partition (MyMemory with label "disk")

- 1 GB ext3 partition (with label "disk0")

In "disk" I copied "beta2_1024.zip" (o2bupdate folder, default.txt, ext2.tar.gz, o2bupdate.tar.gz, haret.exe, zImage)

With ubuntu I installed ext2.tar.gz and o2bupdate.tar.gz (2D/3D driver) in "disk0"

First start up, configuration time then switch off.

I added o2b2update.tar.gz and overwrite zImage (last update Kernel-B7610-GC-REV46)

With ubuntu I extracted o2b2update and then I start up again

I added the next market tools:

- advanced task killer (aggressive and killer frequency --> when screen off)

- CPUboost

- call light

Every time I leave off for about 10 min it doen't wake up

If I can connect to charge , i can have freeze (maximum 3/4 times without problem)

i am not able to understand the problem :D

thank you all

Share this post


Link to post
Share on other sites
I installed again with a total clean condition but I don't know why I continue to have freeze or NO wake up condition!!!

Someone can help me?

I formatted SD memory (8GB) as FAT32

Internal memory is divided in the next way:

- 512 MB as default hidden partition with WMO (Louvre) files

- 512 MB FAT32 partition (MyMemory with label "disk")

- 1 GB ext3 partition (with label "disk0")

In "disk" I copied "beta2_1024.zip" (o2bupdate folder, default.txt, ext2.tar.gz, o2bupdate.tar.gz, haret.exe, zImage)

With ubuntu I installed ext2.tar.gz and o2bupdate.tar.gz (2D/3D driver) in "disk0"

First start up, configuration time then switch off.

I added o2b2update.tar.gz and overwrite zImage (last update Kernel-B7610-GC-REV46)

With ubuntu I extracted o2b2update and then I start up again

I added the next market tools:

- advanced task killer (aggressive and killer frequency --> when screen off)

- CPUboost

- call light

Every time I leave off for about 10 min it doen't wake up

If I can connect to charge , i can have freeze (maximum 3/4 times without problem)

i am not able to understand the problem :D

thank you all

try turning on gesture lock and see if it makes a difference, it seem to work for me, I dunno why..

Share this post


Link to post
Share on other sites

sorry guys, ther's something to update in the guide at the first post or it's all ok and updated ? such as links, methods ecc ... because i want to try to install it but the latest and best version :D !

Share this post


Link to post
Share on other sites
try turning on gesture lock and see if it makes a difference, it seem to work for me, I dunno why..

I forgot to say...the problems are present with "gesture lock" already on...

Share this post


Link to post
Share on other sites
I forgot to say...the problems are present with "gesture lock" already on...

I suspected you will say that. :D However, that just mean I have nothing to offer you, as I just took the gamble and SODs just disappeared.. My setup is almost like yours, except no CPU boost.

Share this post


Link to post
Share on other sites
I suspected you will say that. :D However, that just mean I have nothing to offer you, as I just took the gamble and SODs just disappeared.. My setup is almost like yours, except no CPU boost.

Double checked that you set winmo performance on 'high'? (When setting, you need to reboot the phone first before starting android)

Share this post


Link to post
Share on other sites
I suspected you will say that. :D However, that just mean I have nothing to offer you, as I just took the gamble and SODs just disappeared.. My setup is almost like yours, except no CPU boost.

Ok, thak you. These could be indications that may be colud solve my problem.

Now I will try to remove it.

In the next the exact tool list I have added:

3G Watchdog

Advanced task killer

APN on/off Widget

App List Backup

ASTRO

Battery Widget

Call Light

ClockSync

Data On Demand

Facebook

Get Altitude

Giornali FREE (translated newspapers FREE, for italian news)

Google Traslate

International Settings

Jewels

LiveHome

Livella

Maps

Quick Settings

Voice Search

ringtone

Silent on Charge

SMS Backup+

Street view

TTS Service Extended

Zedge

Now I will try to use without CPU Boost.

For the moment I had twice switch off no forced and it waked up normally, but in general I force sleep.

In every case thank you for your suggestions.

Bye

Giorgio

Share this post


Link to post
Share on other sites

Ive perfrormed another clean install with the latest Rev46. With the unlock gesture enabled, the phone seems to be pretty stable. Ive beeb using it for 24 hours with no SOD.

I guess my previous experience with rev40 wasnt so good probably because the SD card partition went bogus on me (i guess).

Phone is very stable even after installing programs and changing settings and playing with the phone for hours.

Keep it up

Share this post


Link to post
Share on other sites
Ive perfrormed another clean install with the latest Rev46. With the unlock gesture enabled, the phone seems to be pretty stable. Ive beeb using it for 24 hours with no SOD.

I guess my previous experience with rev40 wasnt so good probably because the SD card partition went bogus on me (i guess).

Phone is very stable even after installing programs and changing settings and playing with the phone for hours.

Keep it up

what was your procedure ? so maybe I can found solution for my problems

I cannot use it more than 3 hours before to have SOD...terribly stressing and not sure for important callings (who calls believe my phone is ringing free, but it doesn't ring during freeze status)

Edited by centodue

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.