Guest Amphoras Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) When I try to install this in clockworkmod 5.0.2.0 it sais "can't open <file> (bad)" I've checked the md5. Any ideas? what versions of clockworkmod has it worked on? It worked for me on Clockwork 5.0.2.0. About the wifi, in the logcat I get errors like this: E/WifiHW ( 157): Supplicant not running, cannot connect and E/wpa_supplicant( 831): Unsupported driver 'awext'. Does that mean the driver for the wpa supplicant isn't there/isn't correct, so it can't run meaning the hardware can't connect? Is this one of the this you took out KonstaT or does it just need fixing. Edit: about the sdcard, I get this in the logcat: I/Vold ( 94): Filesystem check completed OK I/Vold ( 94): Device /dev/block/vold/179:1, target /mnt/sdcard mounted @ /mnt/secure/staging E/Vold ( 94): Failed to move mount /mnt/secure/staging -> /mnt/sdcard (No such file or directory) E/Vold ( 94): Failed to move mount (No such file or directory) D/Vold ( 94): Volume sdcard state changing 3 (Checking) -> 1 (Idle-Unmounted) D/MountService( 157): volume state changed for /mnt/sdcard (checking -> unmounted) E/MountService( 157): Boot-time mount failed (-1) Edited November 26, 2011 by Amphoras Link to comment Share on other sites More sharing options...
Guest t0mm13b Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) wireless-tools is missing from AOSP... copy it from CM7's repo into AOSP and compile it? Edit: wpa_supplicant driver needs to be patched up to include awext driver support... in external/wpa_supplicant. Edit 2: Have added the necessary files to the ics4blade github repo, in external/wpa_supplicant :) Edited November 26, 2011 by t0mm13b Link to comment Share on other sites More sharing options...
Guest Amphoras Posted November 26, 2011 Report Share Posted November 26, 2011 The alarm works ok, just no sound. It vibrates though. Link to comment Share on other sites More sharing options...
Guest Racerboy Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) @t0mm13b the vold in bin folder is part of mounting system for sdcard along with kernal? we had problem with racer mounting sdcard a while ago with newer builds of cyanogen for blade, the vold file was ammended and fixed the issue, just a thought :) Edited November 26, 2011 by Racerboy Link to comment Share on other sites More sharing options...
Guest t0mm13b Posted November 26, 2011 Report Share Posted November 26, 2011 I have set up an irc channel on freenode.net for this if you need instant responses. Check it out @ #ics4blade on freenode.net :D :) Link to comment Share on other sites More sharing options...
Guest KonstaT Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) Does that mean the driver for the wpa supplicant isn't there/isn't correct, so it can't run meaning the hardware can't connect? Is this one of the this you took out KonstaT or does it just need fixing. Edit: about the sdcard, I get this in the logcat: So for some reason /mnt/sdcard doesn't exist. I haven't removed any wifi related stuff from my ICS source. What I have removed is: libaudio completely, from blade device tree and from hardware/msm7k/Android.mk common_msm_dirs := libcopybit liblights libopencorehw librpc libstagefrighthw msm7k_dirs := $(common_msm_dirs) boot libgralloc # libaudio qsd8k_dirs := $(common_msm_dirs) libgralloc-qsd8k libaudio-qsd8k dspcrashd msm7x30_dirs := liblights libgralloc-qsd8k librpc libaudio-qdsp5v2 [/code] webrtc, removed whole /external/webrtc folder audiopreprocessing, renamed Android.mk in frameworks/base/media/libeffects/preprocessing/ libril is removed from my zte blade device tree edit. removed something stupid... Edited November 26, 2011 by KonstaT Link to comment Share on other sites More sharing options...
Guest t0mm13b Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) Just a FYI on something... (have recompiled the wpa_supplicant) but failed... Went into adb shell 255|root@android:/system/wifi # insmod /system/wifi/ar6000.ko insmod: init_module '/system/wifi/ar6000.ko' failed (Exec format error) 255|root@android:/system/wifi # :huh: (Kernel/modules from CM7 nightly 255 build, anyone explain that?) Edited November 26, 2011 by t0mm13b Link to comment Share on other sites More sharing options...
Guest KonstaT Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) wireless-tools is missing from AOSP... copy it from CM7's repo into AOSP and compile it? Edit: wpa_supplicant driver needs to be patched up to include awext driver support... in external/wpa_supplicant. Edit 2: Have added the necessary files to the ics4blade github repo, in external/wpa_supplicant :) Wifi is working! :D Attached patched wpa_supplicant. Unzip and replace the one in /system/bin/.wpa_supplicant.zip Edited November 26, 2011 by KonstaT Link to comment Share on other sites More sharing options...
Guest smg22rus Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) Maybe what you need either of these patches to the success of cellular communications:http://review.cyanog...+branch:ics,n,z (just try to help) and this, but this patches alredy in testing http://review.cyanogenmod.com/#q,status:open+project:CyanogenMod/android_frameworks_base+branch:ics,n,z Edited November 26, 2011 by smg22rus Link to comment Share on other sites More sharing options...
Guest Amphoras Posted November 26, 2011 Report Share Posted November 26, 2011 Wifi is working! :D Attached patched wpa_supplicant. Unzip and replace the one in /system/bin/. Pushed it to system using adb push wpa_supplicant /system/bin/wpa_supplicant Its definitely there as I get the same file back it I then do adb pull. However wifi still isn't working. When I turn it on, it just sits at "Turning WiFi on..." Tried a full wipe before pushing the file and I get the same. Is that the right command to put it there or do I need to do anything else like permissions? Logcat still gives E/WifiStateMachine( 139): Failed to start supplicant! Link to comment Share on other sites More sharing options...
Guest Hjanos Posted November 26, 2011 Report Share Posted November 26, 2011 Wifi is working! :D Attached patched wpa_supplicant. Unzip and replace the one in /system/bin/. Not working for me. Did you modify any other file? Link to comment Share on other sites More sharing options...
Guest Racerboy Posted November 26, 2011 Report Share Posted November 26, 2011 Wifi is working! :D comfirmed working here on Racer, thx :) Link to comment Share on other sites More sharing options...
Guest skywave Posted November 26, 2011 Report Share Posted November 26, 2011 Adb push didn't work, so i replace the file in the flashable zip and flashed again. Confirm it sees my network :) Link to comment Share on other sites More sharing options...
Guest dream smile Posted November 26, 2011 Report Share Posted November 26, 2011 sry for late reply: with the latest hero alpha4 i have full screen without the virtual soft keys imposed on the main screen, sound works (had to modify the vold.fstab to mount sdcard to play music) also changed the build.prop slightly and changed the libhtc_ril.so no network but i kinda expected that.... This is tested on Racer not Blade ä½ å¥½~~~~~~~~~~ Link to comment Share on other sites More sharing options...
Guest Racerboy Posted November 26, 2011 Report Share Posted November 26, 2011 ä½ å¥½~~~~~~~~~~ best place would be to ask in the Racer forum as this thread is for the devs that are working on ICS for the Blade Link to comment Share on other sites More sharing options...
Guest LordMeltdown Posted November 26, 2011 Report Share Posted November 26, 2011 Wifi is working! :D Attached patched wpa_supplicant. Unzip and replace the one in /system/bin/. it worked for me! thanks Link to comment Share on other sites More sharing options...
Guest t0mm13b Posted November 26, 2011 Report Share Posted November 26, 2011 Wifi is working! :D Attached patched wpa_supplicant. Unzip and replace the one in /system/bin/. To confirm, that was from the repo pushed earlier? :) Link to comment Share on other sites More sharing options...
Guest KonstaT Posted November 26, 2011 Report Share Posted November 26, 2011 To confirm, that was from the repo pushed earlier? :) Yep, patch from your github. :) Link to comment Share on other sites More sharing options...
Guest skywave Posted November 26, 2011 Report Share Posted November 26, 2011 On a sidenote, i had to wifi turn off and on again before it saw my network. But it works :) Great progress Link to comment Share on other sites More sharing options...
Guest Amphoras Posted November 26, 2011 Report Share Posted November 26, 2011 Pushed it to system using adb push wpa_supplicant /system/bin/wpa_supplicant Its definitely there as I get the same file back it I then do adb pull. However wifi still isn't working. When I turn it on, it just sits at "Turning WiFi on..." Tried a full wipe before pushing the file and I get the same. Is that the right command to put it there or do I need to do anything else like permissions? Logcat still gives E/WifiStateMachine( 139): Failed to start supplicant! Unzipped the rom and put it in there then flashed it and now it works. Link to comment Share on other sites More sharing options...
Guest hedgepigdaniel Posted November 26, 2011 Report Share Posted November 26, 2011 pulled latest code from https://github.com/t0mm13b/ics4blade and AOSP master and this is what happens when I compile: Link to comment Share on other sites More sharing options...
Guest Hjanos Posted November 26, 2011 Report Share Posted November 26, 2011 pulled latest code from https://github.com/t0mm13b/ics4blade and AOSP master and this is what happens when I compile: Rename device/zte/blade/overlay directory Link to comment Share on other sites More sharing options...
Guest KonstaT Posted November 26, 2011 Report Share Posted November 26, 2011 pulled latest code from https://github.com/t0mm13b/ics4blade and AOSP master and this is what happens when I compile: You still need to add resources to config.xml. <!-- Regex array of allowable upstream ifaces for tethering - for example if you want tethering on a new interface called "foo2" add <item>"foo\\d"</item> to the array --> <add-resource type="string" name="config_tether_upstream_regexs"> <string-array translatable="false" name="config_tether_upstream_regexs"> <item>"rmnet\\d"</item> <item>"wlan\\d"</item> </string-array> </add-resource> <!-- List of regexpressions describing the interface (if any) that represent tetherable Wifi interfaces. If the device doesn't want to support tethering over Wifi this should be empty. An example would be "softap.*" --> <string-array translatable="false" name="config_tether_wifi_regexs"> <item>"athap0"</item> </string-array> <!-- Boolean indicating if we require the use of DUN on mobile for tethering --> <add-resource type="bool" name="config_tether_dun_required"> <bool translatable="false" name="config_tether_dun_required">false</bool> </add-resource> <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> <integer-array name="config_keyboardTapVibePattern"> <item>30</item> </integer-array> </resources> [/code] Link to comment Share on other sites More sharing options...
Guest FezzFest Posted November 26, 2011 Report Share Posted November 26, 2011 No, not yet. Why don't you try it yourself? Link to comment Share on other sites More sharing options...
Guest hecatae Posted November 26, 2011 Report Share Posted November 26, 2011 hey any1 fixed the network issue? I thought you were? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now