Guest shreyas1234 Posted May 26, 2012 Report Share Posted May 26, 2012 guys pls help me,i was using liquid next 1.9.2 rom when i flashed the official 2.2 rom with acer download tool.Now my cell works with every button combo but it only vibrates and does not show any on-screen responses I tried and flashed 2 or 3 different bins for my device but each time i boot my phone, it keeps on vibrating and all the three notification led's blink at the same time Plaese Help A.S.A.P >> No Flashing dinfo.bin. >> .bin Class is : A1 >> Read MgFl Header Ok!! >> AMSS FileFlag : 63 >> OS FileFlag : 95 >> Please do Not remove USB cable, unless the program indicates you can do it. >> Download Process Started at AMSS mode. >> Hex file Start >> Hex file Succ !! >> AMSS Start >> AMSS Succ !! >> Cmd [AMSS => Fastboot] >> Wait UsbEvent [AMSS => Fastboot] >> No UsbEvent [AMSS => Fastboot], Now quit process... >> Process finished. [Not Succ] >> Process Result : Download Process was failed... >> Process finished, USB cable can be removed now. Link to comment Share on other sites More sharing options...
Guest cliclicli Posted May 26, 2012 Report Share Posted May 26, 2012 (edited) you must only recharge your battery....when you plug an ac adapter...the screen is in withe color loop for few seconds? Edited May 26, 2012 by cliclicli Link to comment Share on other sites More sharing options...
Guest shreyas1234 Posted May 27, 2012 Report Share Posted May 27, 2012 tried but it just vibrates once and after a few seconds it starts vibrating continuously and the three led'd at top all blink at the same time and no screen response Link to comment Share on other sites More sharing options...
Guest vosal Posted May 27, 2012 Report Share Posted May 27, 2012 Try to put him in download mode, start ith putt off the battery and the usb cable first than put the battery in and try to start the liquid with the kay combo volume up, photocamera key and power. Now you can put the usb cable and your liquid should be recognized by acer tools, reflash the bin and your phone will came to normaly Link to comment Share on other sites More sharing options...
Guest shreyas1234 Posted May 27, 2012 Report Share Posted May 27, 2012 i can flash the bin perfectly but after flashing my cell does not boot up and starts vibrating like hell and the three led's at top keep blinking Link to comment Share on other sites More sharing options...
Guest shreyas1234 Posted May 27, 2012 Report Share Posted May 27, 2012 here is the latest log ================================================================= ===================== Debug Log Start !! ======================== ================================================================= Program version is : acer Download Tool [RD] v1.282 (20110214) -- Edit By Ma Process Starting Time is : 20 : 13 : 48 [FileChecking] : [info] : dinfo.bin full path : D:\A1_DL_Tool_[intra][single]_v3.100_20091027\DevInfo.bin [VerInfo] : [Error] : MergedFile is not A4. [VerInfo] : [info] : merged os file is : Acer_LiquidE_4.005.05_AAP-GEN2 [MergedOSFileClass] : [info] : MergedOSFile Class is : A1 [FM] : [info] : FM not Ok. [FM] : [info] : FM not Ok. [FM] : [info] : FM Ok!! [ReadFlHd] : [info] : File for Read is : D:\A1_DL_Tool_[intra][single]_v3.100_20091027\ACER_A1_Bin\acer_MergedOSFile.bin [FF] : [info] : AMSS : 63 [FF] : [info] : OS : 127 [Mode] : [info] : Download Process started at AMSS mode [serialPort] : [info] : TryTimes is : 0 [serialPort] : [info] : Port open ! [serialPort] : [info] : Discard in, out Buf ! [GetPhVer@DMSS] : [Warning] : AMSSVer, buf[0], buf[1] Not Recognized [GetPhVer@DMSS] : [Warning] : AMSSVer, buf[0], buf[1] Not Recognized [GetPhVer@DMSS] : [Warning] : AMSSVer, buf[0], buf[1] Not Recognized [GetPhVer@DMSS] : [Warning] : OSVer, buf[0], buf[1] Not Recognized [GetPhVer@DMSS] : [Warning] : OSVer, buf[0], buf[1] Not Recognized [GetPhVer@DMSS] : [Warning] : OSVer, buf[0], buf[1] Not Recognized [userSelect] : [info] : User select A1 [Hex] : [info] : Connect COM Port. [Hex] : [info] : Connect --- Port Open Ok ! [Hex] : [info] : Connect --- Discard in and out buffer Ok ! [serialPort] : [info] : ConnCOMPort Rst : False ----------------------------------------------------------------- ----------------- [info] : Hex file Start ----------------------- ----------------------------------------------------------------- [HexFile] : [info] : .hex for using is : C:\Users\SAM\Desktop\acer liquid download tool\A1_NPRG8650.hex [Hex] : [info] : Hex's Rx thread is ready ! [Hex] : [info] : Hex's Tx thread is ready ! [Hex] : [info] : Reset UsbEvent_Hex [Hex] : [info] : HexData Tx is finished. [Hex] : [info] : Send Cmd before USB dis-connected. [Hex] : [info] : and ten, USB is going to be dis-connected. [Hex] : [info] : USB dis-connected - OK!! [Hex] : [info] : Now, wait UsbEvent [Hex] : [info] : Re-get AMSS Com Port is : COM37 [Hex] : [info] : We are goint to Re-connect COM Port. [Hex] : [info] : Connect COM Port. [Hex] : [info] : Connect --- Port Open Ok ! [Hex] : [info] : Connect --- Discard in and out buffer Ok ! ----------------------------------------------------------------- ----------------- [info] : Hex file Finished -------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- -------------------- [info] : AMSS Start ----------------------- ----------------------------------------------------------------- [AMSS] : [info] : AMSS's Rx thread is ready ! [AMSS] : [info] : AMSS's Tx thread is ready ! [AMSS] : [info] : @ PartitionTable [AMSS] : [info] : @ PartitionTable_Rsp [AMSS] : [info] : PT Same [Time] : [info] : Start : 20 : 14 : 15 [AMSS] : [info] : Timeout setting is : 20000 [AMSS] : [info] : DBL OK [AMSS] : [info] : Timeout setting is : 20000 [AMSS] : [info] : FSBL OK [AMSS] : [info] : Timeout setting is : 20000 [AMSS] : [info] : OSBL OK [AMSS] : [info] : Timeout setting is : 43000 [AMSS] : [info] : AMSS OK [AMSS] : [info] : Timeout setting is : 20000 [AMSS] : [info] : APPSBOOT OK [AMSS] : [info] : Timeout setting is : 34000 [AMSS] : [info] : DSP1 OK [Time] : [info] : End : 20 : 16 : 36 [AMSS] : [info] : AMSS All OK. [AMSS] : [info] : goint to Close and Dispose COM Port. [AMSS] : [info] : AMSS Succ!! ----------------------------------------------------------------- -------------------- [info] : AMSS Finished --------------------- ----------------------------------------------------------------- [ChangeMode] : [info] : Change mode Start !! [AMSS => Fastboot or Restart] [serialPort] : [info] : TryTimes is : 0 [serialPort] : [info] : Port open ! [Rx_getpk] : [Warning] : This Exp is not an Error. [Rx] : [Warning] : RxData Length <= 0 [Rx] : [Warning] : SpFlag_PoolValueIndicator : 15 [serialPort] : [info] : Discard in, out Buf ! [ChangeMode] : [info] : Port is Disposed [usbEvent] : [info] : Wait UsbEvent [AMSS => Fastboot] [usbEvent] : [Error] : No UsbEvent [AMSS => Fastboot], timeout... [FinalResult] : [info] : one of Flag_Process is failed... Link to comment Share on other sites More sharing options...
Guest shreyas1234 Posted June 5, 2012 Report Share Posted June 5, 2012 thanx for your fast replies i've got my cell back repaired from the acer care centre Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now