Jump to content

CM9 for Lg Optimus L3 (E400)


Guest tony_secreto

Recommended Posts

Guest sparhawk76

What network are you on and what country?

Fido (Rogers), Canada.

Just to try and see if it would downgrade the baseband, I tried flashing a few of the europe-open v10 releases. All the ones I tried would just cycle the lg boot animation, with a period of white screen at the end before restarting the animation. Gave up for now and through back the stock fido firmware. More attempts will be made later, happy to test anything that might work. I'm guessing it needs new RIL libraries for my phones newer baseband.

Sparhawk

Edited by sparhawk76
Link to comment
Share on other sites

Guest hecatae

Fido (Rogers), Canada.

Just to try and see if it would downgrade the baseband, I tried flashing a few of the europe-open v10 releases. All the ones I tried would just cycle the lg boot animation, with a period of white screen at the end before restarting the animation. Gave up for now and through back the stock fido firmware. More attempts will be made later, happy to test anything that might work. I'm guessing it needs new RIL libraries for my phones newer baseband.

Sparhawk

I'm glad the baseband change failed, you would have lost 3G, as the e400r supports 3g/hspa 850/1900 and the european version supports 3g/hspa 900/2100

Link to comment
Share on other sites

Guest hecatae

which improvements of this recovery??

latest cm9 recovery, should be cwm6, I just need to know if it works, if so I'll release a proper update.zip to replace recovery, at the moment it fake flash hot replaces for people to try without losing a working recovery

Link to comment
Share on other sites

Guest chelseartb

I'm glad the baseband change failed, you would have lost 3G, as the e400r supports 3g/hspa 850/1900 and the european version supports 3g/hspa 900/2100

will the v10n baseband work on the latest cm9?

Link to comment
Share on other sites

Guest Manoel Conde

latest cm9 recovery, should be cwm6, I just need to know if it works, if so I'll release a proper update.zip to replace recovery, at the moment it fake flash hot replaces for people to try without losing a working recovery

then install so that it

but when I restart it goes back to version 5

Link to comment
Share on other sites

Guest sparhawk76

Gave up on switching baseband and have been digging more into the problem from other approaches.

On my stock rom, rild opens: /dev/oncrpc/30000000:9cac4f71

On the CM9 rom, rild is trying to open: /dev/oncrpc/30000000:dbe9dfa1

When viewing the directory listing of /dev/oncrpc/ on the cm9 rom, there is no /dev/oncrpc/30000000:dbe9dfa1, however there is a /dev/oncrpc/30000000:9cac4f71.

hI'm guessing is that somehow rild is getting the wrong ONC RPC port when trying to connect to the baseband. Tried to create a hard link between the 2 files in /dev/oncrpc/ but that didn't help rild to start up.

ON the stock firmware when run from the shell, rild gives the following output:

ONCRPC Opened device: /dev/oncrpc/30000000:9cac4f71

ONCRPC Opened device: /dev/oncrpc/30000012:00040000

ONCRPC Opened device: /dev/oncrpc/30000003:febcbbaf

ONCRPC Opened device: /dev/oncrpc/30000095:f227e1e3

ONCRPC Opened device: /dev/oncrpc/3000000e:00090000

ONCRPC Opened device: /dev/oncrpc/3000000e:00090000
On the latest CM9 nightly, running rild from the shell gives:
Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = 0  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../m

odem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 145:ARG1 805306368

:ARG2 -605429855:ARG3 0:

ONCRPC Opened device: /dev/oncrpc/30000012:00040000

ONCRPC Opened device: /dev/oncrpc/30000003:febcbbaf

ONCRPC Opened device: /dev/oncrpc/30000095:f227e1e3

ONCRPC Opened device: /dev/oncrpc/3000000e:00090000

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 ERR :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, tout

 = -1  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../../

modem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 6079:ARG1 8053063

68:ARG2 -605429855:ARG3 -1:

ONCRPC Opened device: /dev/oncrpc/3000000e:00090000

Unable to open router port: No such file or directory

ONCRPC Failed to open device: /dev/oncrpc/30000000:dbe9dfa1

 ERR :MSG Open handle failed, unable to open program 30000000 ver dbe9dfa1 NOT F

OUND

  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/oncrpc_cb.c:LINE 232:ARG1 80530636

8:ARG2 -605429855:ARG3 0:

 ERR :MSG Couldn't setup RPC call  :FILE vendor/qcom/proprietary/oncrpc/oncrpc/o

ncrpc_cb.c:LINE 277:ARG1 0:ARG2 0:ARG3 0:

 FATAL :MSG Failed to lookup RPC client. prog = 805306368, vers = -605429855, to

ut = -1  :FILE vendor/qcom/proprietary/common/build/remote_api_makefiles/../../.

./modem-apis/msm7627a/api/libs/remote_apis/cm/src/cm_clnt.c:LINE 12725:ARG1 8053

06368:ARG2 -605429855:ARG3 -1:

Link to comment
Share on other sites

Guest kerberos2001

Hi \o,

Recently i've installed the CM9 for E400, and worked successfully. But, I have some issues with this rom, as follow:

Radio FM missing (not exactly a issue, due the lack for support at this momment, I know =p);

The Google Play (Market), it's falling into ERROR 921, and I can't download any apps to my Android.

However, I have "googled" about error 921, and I've found some workarounds, like wipe cache, restart play application, and others, but, no one of these has worked. Have you a another solution for this problem?

Update:

-----

Sorry for any inconveniece, I already solved the problem =):

Follow here to solve: http://forums.lenovo.com/t5/ThinkPad-slate-tablets-Knowledge/Fixing-Google-Play-Cache-Problem/ta-p/749935

Edited by kerberos2001
Link to comment
Share on other sites

Guest WhiteDeath25

Hi \o,

Recently i've installed the CM9 for E400, and worked successfully. But, I have some issues with this rom, as follow:

Radio FM missing (not exactly a issue, due the lack for support at this momment, I know =p);

The Google Play (Market), it's falling into ERROR 921, and I can't download any apps to my Android.

However, I have "googled" about error 921, and I've found some workarounds, like wipe cache, restart play application, and others, but, no one of these has worked. Have you a another solution for this problem?

Update:

-----

Sorry for any inconveniece, I already solved the problem =):

Follow here to solve: http://forums.lenovo...lem/ta-p/749935

Did you installed gapps?

Link to comment
Share on other sites

Guest kerberos2001

Yep, I had installed the GAPPS-ICS package... With the procedure in link, my Market was worked ok.

Now, the other problem, it's a problem with HSDPA/EDGE conectivity: The cellphone shows the H (or E) symbol, but it rarely opens the data access to EDGE/UMTS network. Could have a workaround for this issue?

Remember that, however, the Wi-fi access works ok!

Ah, could I help you with some log, or debug?

Did you installed gapps?

Edited by kerberos2001
Link to comment
Share on other sites

I keep having that "Defualt Message".

And notice, is " D e f u a l t "

Annoying.

Appart from that it boots faster.

Any idea how to get rid of that notification?

======UPDATE======

It just disappeared after a reboot.

Doing fine, so far.

====UPDATE====

Annoying notification disappeared after a pair of reboots.

gapps ok.

Camera stops failing in second run.

Problems at rebooting after having installed gapps. It seems failure at rebooting maybe related to reboot in power menu. Failure at booting is solved entering to CW menu and selecting "reboot now".

Past problems with mobile connection (3G) seems solved.

Camera ok, video ok, GPS ok, music ok, navigation in browser ok... calls and messaging with some minor issues.

So far everything is functional with only small issues described above.

My model is LG-E400g and using Claro Nicaragua.

Edited by joe74
Link to comment
Share on other sites

Guest chelseartb

I keep having that "Defualt Message".

And notice, is " D e f u a l t "

Annoying.

Appart from that it boots faster.

Any idea how to get rid of that notification?

======UPDATE======

It just disappeared after a reboot.

Doing fine, so far.

====UPDATE====

Annoying notification disappeared after a pair of reboots.

gapps ok.

Camera stops failing in second run.

Problems at rebooting after having installed gapps. It seems failure at rebooting maybe related to reboot in power menu. Failure at booting is solved entering to CW menu and selecting "reboot now".

Past problems with mobile connection (3G) seems solved.

Camera ok, video ok, GPS ok, music ok, navigation in browser ok... calls and messaging with some minor issues.

So far everything is functional with only small issues described above.

My model is LG-E400g and using Claro Nicaragua.

Wow the problem with 3g is solved!!! Wat version of cm9 did u use? May i have a link plz??? did u also have a the problem with the mobile network before ur current version of cm9? Did u use wifi to connect to internet on fone before tht?

Link to comment
Share on other sites

Wow the problem with 3g is solved!!! Wat version of cm9 did u use? May i have a link plz??? did u also have a the problem with the mobile network before ur current version of cm9? Did u use wifi to connect to internet on fone before tht?

Yes, indeed. I had some problems to connect via 3G before. It's ok now.

Here the link to the one I'm using>> http://get.cm/get/jenkins/14260/cm-9-20121202-NIGHTLY-e400.zip

Install, reboot... wait... enjoy.

I used wifi before. Now works wifi, 2G and 3G.

Hope for next monday all major bugs will be solved. Facebook app is honestly a s*** in CM9. It worked a bit better in my stock rom with Gingerbread.

This is my second day using it.

By the way, the one I used before was the cm-9-20121111.

Greetings.

Link to comment
Share on other sites

It didnt work!! I really cannot use my phone without network connection to 3g... Im back to stock now

You should report the band your provider uses. Why should it work with my model and not yours? Remember you have to setup your APN manually. It's what I did.

Link to comment
Share on other sites

Guest skunk_claudio

I'm on 20121202 nightly it works quite well. the phone keeps rebooting randomly when i turn on the wifi and still can't use the usb on linux!(it works in winzoz disabling debugmode.

thanks ;D

Link to comment
Share on other sites

I'm on 20121202 nightly it works quite well. the phone keeps rebooting randomly when i turn on the wifi and still can't use the usb on linux!(it works in winzoz disabling debugmode.

thanks ;D

Downloading now.

====UPDATE====

Installed.

Edited by joe74
Link to comment
Share on other sites

I installed the new 4.0.4 rom problem can not be anything to get uradim.ne usd card, manager fail, nothing to install with Google plaj says that it is already installed but I do not see it anywhere.

Link to comment
Share on other sites

I installed the new 4.0.4 rom problem can not be anything to get uradim.ne usd card, manager fail, nothing to install with Google plaj says that it is already installed but I do not see it anywhere.

How are you installing Google Play?

There is gapps >> http://wiki.cyanogenmod.org/wiki/Latest_Version/Google_Apps

and it should be installed via CW recovery.

Link to comment
Share on other sites

Tried latest build and Miui both cause the poor screen display issue for me on new E400 white came with stock V10K. Hoping a solution is found soon.

Even had the poor display when downgrading to V10I (i think it was) version as well.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.