Jump to content

[STOCK] GEM10313BK-rev2 090513-1400 ROM


Guest gemini-frank

Recommended Posts

Guest gemini-frank

In this topic you'll find the utility and ROM to restore your Gemini Devices 10313BK-rev2 tablet to the latest software release.

Before you begin, please run the 'Updater' application and ensure your device is listed as a 10313BK-rev2. This ROM is NOT suitable for the original 10313BK.

Requirements

  • Windows PC
  • miniUSB cable
    Note that updating the ROM will wipe the device!

    Downloads

    In order to prepare for installation download the following files:
    • 090513-1400 ROM - DOWNLOAD - MD5: e0e56bace2919e7fb492f30a86ea0d0a
    • RockChip Batch Tool - DOWNLOAD

    Installation

    To install the ROM on your device, carry out the following steps:

    [*]Unzip the two zip files you downloaded

    [*]Power off your tablet

    [*]Launch the RockChip Batch Tool

    [*]Click the '3 dots' (...) button to select an update image - choose the 'gem10313bk-rev2.20130509-1400.uk.img' image you just extracted

    [*]With your tablet still off, plug in the USB cable while holding the 'Vol -' button

    [*]In the 'Connected Devices' panel, a green '1' should appear, as shown below. At this point Windows may prompt you for drivers - these can be found in the Rockchip Batch Tool directory.

    rkupdate.jpg

    [*]Click the 'Restore' button (3rd from the left) and the device will be flashed. Do not unplug the device until this process is complete (indicated by 'Restore Done Success' in the status window as shown below.

    rkupdate2.jpg

    [*]Your device is now upgraded!

    If you have any questions feel free to post below! :)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.