Jump to content
  • MMM³ - MoDaCo Mod for MOJO now available


    We're prepping our review of the MadCatz MOJO review (details / buy), but the tweaks have already started flowing. :)

    The MoDaCo Mod for MOJO, which adds root and increased Play Store app availability to the MadCatz MOJO, is now available!

    The mod takes the form of a Superboot image (as used on many devices previously), with additional features to resolve the Play Store lack-of-apps issue caused by the lack of a touchscreen feature XML file.

    What is this?

    Superboot is a boot.img that when booted, will root your device the first time you boot (installing su and the superuser APK). No need to flash any partitions, no messing with the contents of your data partition, no overwriting the shipped ROM on your device, just boot the boot image using the instructions below and you're done!

    What are the pre-requisites?

    You need a MOJO (duh) and a USB Male A-A cable to carry out this process. And a computer I suppose (Windows, Mac or Linux).

    Any caveats?

    You should note that while rooting may affect your ability to receive future OTAs, reverting back to stock is easy enough. We'll cross that bridge when we come to it. ;)



    • Superboot MMM³ - DOWNLOAD (ROMraid) - MD5: 835de32dd795d2825ade1ed1be422abf

      • Download the Superboot zip file above and extract to a directory
      • Put your device in bootloader mode - Unplug the power cable and any USB cables (the dongle can stay in), insert the USB Male A-A cable in the port labelled '2.0', then insert the power cable. 'Key driver not found.. Booting OS' will appear on screen.
      • WINDOWS - install the device drivers from the directory you extracted above if required, then run 'superboot-windows.bat' as Administrator
      • MAC - Open a terminal window to the directory containing the files, and type 'chmod +x superboot-mac.sh' followed by 'sudo ./superboot-mac.sh'
      • LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x superboot-linux.sh' followed by 'sudo ./superboot-linux.sh'
      • You will see 'Booting downloaded image' and a black screen, then the screen will return to 'Key driver not found.. Booting OS'. At this point, unplug the USB cable and the power cable, wait a few moments, then reconnect the power cable to boot as normal.
      • For all the missing apps to show up on the Play Store, you may need to clear data on the Play Store in 'Settings -> Applications' and reboot, then run the Play Store again.

        Enjoy! :)


        PS If you find this useful, please consider supporting MoDaCo by signing up for a MoDaCo subscription! Visit the store for further details!


    User Feedback

    Recommended Comments

    Now updated to the 3rd release - MMM³ - which offers even more Play Store compatibility.

    The MOJO will now effectively masquerade as a Nexus 10 from a hardware perspective, so everything should really be available. Certainly apps like Facebook now appear properly.

    This can be safely used over the top of the previous releases.


    Share this comment

    Link to comment
    Share on other sites

    UHHH, Please help!!! I have tried a million different things here and on other websites, but the file will not download. Please check if it has been removed to an inactive page or email me; preferably both. My email is [email protected]

    Share this comment

    Link to comment
    Share on other sites

    Hi Paul,

    I downloaded the superboot r3-mojo file from the following link


    and followed instructions from YouTube video to root my M.O.J.O.

    However, I am getting following error:



    C:\mojosuperboot>fastboot-windows.exe -i 0x0738 boot boot.superboot.img
    downloading 'boot.img'...

    FAILED (data transfer failure (Too many links))
    finished. total time: 16.260s


    Thanks in advance for your / community members help!!


    Share this comment

    Link to comment
    Share on other sites

    Hi there,

    I've just recently bought a Mad Catz MOJO. 

    I'm having great difficulty trying to root the device. The links I've tried, don't work.  

    Does any one have any ideas please?



    Share this comment

    Link to comment
    Share on other sites

    Hi there,

    Sorry for the delay in getting back to you. 

    Thank you for your help, much appreciated. 





    Share this comment

    Link to comment
    Share on other sites


    In need of some help please,

    Every time i try the download link it just opens another window and displays this screen. 

    The link provided in the comments takes me to a screen to enter a revel code. I do this and click on download and I get a page with the following error:


    Not Found

    The requested URL /files/r3-mojo-superboot-mmm.zip was not found on this server.

    Apache/2.4.18 (Ubuntu) Server at wright.modaco.net Port 80


    Thanks in advance.



    Share this comment

    Link to comment
    Share on other sites

    My issue is that I keep on getting this message over and over when rooting my Mojo "WINDOWS FOUND DRIVER FOR YOUR DEVICE BUT ENCOUNTERED AN ERROR WHILE ATTEMPTING TO INSTALL IT, ACCESS DENIED" how to do I get it fixed? I'm using Windows 10.

    Share this comment

    Link to comment
    Share on other sites

    I am using windows 10, and it says the drivers encountered a problem 

    dealing with hash?


    I am trying to root the device to be able to upgrade the android version

    Share this comment

    Link to comment
    Share on other sites

    Tried to install the drivers on my PC with Mad Catz box connected (Key driver not found....Booting OS).

    Used the link from protivakid (Sep 30, 2017)

    Received the following message: See attached.


    Share this comment

    Link to comment
    Share on other sites

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Social

  • Topics

  • Posts

    • Hey!Any fellow motorcycle riders here? I just watched this video about Big Ear filtered custom motorcycle earplugs and I want to know if any of you here tried their products. I'd love to get myself a pair but I want to know if they're great first. Any other recommendation? Thanks! https://www.youtube.com/watch?v=74-CvPzyW48&t=5s
    • Hello! This is my first post here. Glad to finally join this community.
    • I dabble in pretty much every bit of tech out there, but there are two bits of tech that really interest me and I’ve never yet got involved with. The first is 3D printing (I still haven’t gone there, but I feel the time is coming) and the second is laser engraving and cutting. I’m not sure what the fascination is with the latter for me (maybe it’s the ‘freaking laser!’ factor), I’m not particularly craft or artistic, but I’ve always just thought the ability to engrave artwork onto stuff is fascinating. With this in mind, when I was asked if I wanted to review the Flux beamo, a new Kickstarter project looking to democratise laser engraving and cutting, I just couldn’t say no! Flux? Who? It’s probably worth starting with a few words on Flux themselves. Of course, when backing a Kickstarter project, the first concern is often ‘am I going to see the product I’m backing’? Thankfully, Flux has a solid pedigree in this regard so for once this is a Kickstarter you can enter with confidence. Taiwan based Flux was founded in 2014 with the goal of making 3D printing accessible to all. $1.6m of Kickstarter funding later saw the release of the critically acclaimed Flux Delta, a modular 3D printer that combined laser engraving and drawing. So what is the beamo? The beamo laser cutter and engraver packs a powerful 30W CO2 laser into an impressively small footprint that’s barely bigger than 4 sheets of A4 paper. It weighs in at 22Kg and it’ll fit in nicely with the most compact of homes or offices, not least because of its smart industrial design. Utilising the classic Flux approach, the design blends cutting-edge technology (pun intended) with impressive approachability, quality and functionality. While it might look like a well thought out consumer product, Beamo actually includes features only normally found in industrial-grade laser cutters including closed-loop, maintenance free water-cooling, a 1,000 DPI laser that is smaller than the width of a human hair with 0.05mm layer depth, an optional rotary add-on for engraving curved objects and even an optional diode laser and CO2 laser for improved cutting speed and efficiency. But what’s it like? By far the best way for me to review the beamo is to talk about my experience as a complete engraving / cutting / 3D printing novice. Honestly, it couldn’t have been any more straightforward. The machine comes well packed in a huge box with everything you need to get started included. Take the beamo out of the box, plug in the Wi-Fi adaptor if required, affix the extraction hose to the back with a jubilee clip (it’s just like a tumble dryer hose), plug it into the mains and turn it on. It really is as simple as that to set up. At this point the huge display on the right of the device (which looks to be Raspberry Pi powered by the way!) springs into life and you’ll quickly arrive at a straightforward touchscreen UI for controlling the machine. From here you can configure Wi-Fi details or view the Ethernet connection details, which will provide you with an IP address you’ll use to connect from your PC. On your PC or Mac you’ll need to download the Beam Studio application which connects to the beamo using the IP address displayed on your machine. A standard sample print is included (together with a small piece of wood in the box, a lovely touch!) to let you quickly and easily see the machine in action. It’s rather impressive! The sample project loads up and has a beamo logo set to engrave and a circle around it set to cut. When kicking it off for the first time and seeing the engraving in action, it’s incredibly cool and exciting, but when it cuts – wow, that’s when it really gets taken to the next level. This thing is AWESOME! After trying the demo project, setting up your own is incredibly easy. The Beam Studio app can import all types of files (including bitmaps, not just vectors), it can convert to monochrome or grayscale and it includes a wide range of presets for different types of materials. After starting the job, the display on the machine itself helps you keep track of progress and there’s a handy ‘abort’ option on the touchscreen display should things go awry. The beamo can engrave and cut cardboard, wood, bamboo, leather and acrylic and engrave fabric, rubber, cement (!), glass, stone, anode metal or stainless steel (with the diode laser). I’ve been a bit of a maniac and shoved all sorts of things in the machine from phone cases to Moleskine diaries to wallets and its handled everything with aplomb. It’s so easy to use and fun, you won’t be able to help yourself.  By far my favourite beamo feature is its built in camera. This allows you to take a picture of the bed with your material in place to allow you to perfectly align your image and ensure that things get engraved or cut in the correctly place. The only other action that needs to be completed before kicking off the job is focusing the laser, which is as simple as raising / lowering the laser unit against an acrylic guide (an autofocus mod is available for an additional cost). The reviewers guide for beamo suggested keeping a fire extinguisher nearby was a good idea, which makes sense, but on the whole beamo is designed to be as safe as possible. All fumes are vented out the back by a powerful fan and the machine pauses immediately if the lid is opened.  Should I buy a beamo? The $849 cost of entry for beamo is no small chunk of change, but my word, what a machine you get for your money. You’ll quickly find yourself inundated with requests from friends to engrave things and you’ll find yourself looking at everything in a new way with a ‘does it engrave’ thought in your mind. Flux have done an astonishingly good job of making laser tooling available to everyone and I wouldn’t hesitate to recommend adding the beamo to your arsenal. Head on across to Kickstarter to back the campaign! View full item
    • Sold to me - payment sent
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.