Jump to content

jackylui

Members
  • Content Count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jackylui

  • Rank
    Newbie
  1. Thanks xippon In my case, after switching off the machine, I try to reset the machine by pressing "0 + 4-way navigation key UP + Power" simultaneously. After the phone prompts for reset, press 1 and then Y. The phone reset successfully. However, if I do the reset when I go to "Settings" -> "Security" -> "Reset" , and try to hard reset the machine, it fails. Besides, I find that there are three reset options under the "internal" menu, it failed to reset the machine as well. The problem is still here. Sorry for all.
  2. Thanks xippon I tried to re-flash the machine as you taught me but it did not work. The "Eboot" and "PDA" version were updated but the updating of "Phone" was suspended. When I go to "Settings" -> "Security" -> "Reset" , and try to hard reset the machine, it fails. What's problem with the reset function??? If you see my first post, I told you all that the screen showed the below message when doing update. [Phone] Active OFF -> Active OFF [Phone] Reset Pin -> Low : OFF *[PHONE] Phone Download Failed! Any idea?? Thank you very much!!
  3. Thanks for your advice! I know it must be the easiest way to fix the problem but unfortunately my machine is beyond the warranty of Samsung. I hope there is any solution I can do it myself.
  4. I tried to re-flash the machine with GD1. Although the update of "PDA" was completed, during the update of the "Phone" part, the screen showed: [Phone] Active OFF -> Active OFF [Phone] Reset Pin -> Low : OFF *[PHONE] Phone Download Failed! panateo's method as you mentioned was tried as well but it still failed to update the "Phone" part. Although the OS is updated to WM6, the phone function is absent right now. I check in the "Version" under "Settings", the phone version is blank. Any suggestion??
  5. Help!! Brothers I have tried "hepics" 's method to update my i600 to wm6. (please see the methods as below) For the first attempt, around the end of the process, it took a quite long time without any response. I then followed hepics's advice to unplug the battery for another reset... it does not help anymore. Then, I tried one more "flash" but the update hung up at the end also. I have no choice but try to re-flash it with the GD1 and GA2 roms. However, during the updating "Phone" part, the phone screen shows the following messages. [Phone] Active OFF -> Active OFF [Phone] Reset Pin -> Low : OFF *[PHONE] Phone Download Failed! My phone does not have the phone function right now. What can I do?? The phone can still get into the bootloader. Any remedy?? QUOTE(hepics @ Aug 3 2007, 21:27) The three extracted files and the flashing software (from previous i600XXGC6) is currently uploading to rapid share. Should take 30 more minutes to complete :) . Some points. I am disappointed in WM6 Update for many reasons. Including - No Pocket Office (I guess because after WM6 there is not enough space left in ROM) - No WM6 VoIP (One of the MAIN reasons for me to install WM6, I am still trying to see if its hidden somewhere inside) both the above features are official part of Microsoft Windows Mobile 6 Standard but have been removed from i600 version. Some instructions.. WARNING: Do this at your own risk. I had some trouble with the first update attempt. The update said its successful but the PHONE Component (GSM) of i600 was not working. I could not fix the problem on the same machine, but managed to fix it using another computer so I guess it was some driver issue on my machine. Start the I600_WCEDownloader_v1.1_Single.exe Application Select the three files Eboot = WM6Eboot2.nb0 PDA = WM6PDA.bin Phone = WM6Phone.bin Boot the phone in flash mode. Refer to http://wiki.modaco.com/index.php/Samsung_i...Into_Bootloader for entering boot mode. To enter flash mode / boot mode you must first turn off the device. Then press three keys "power" + "right soft key" + "camera key / back key" Click at the Start Button to start the flash. NOTE: The device takes a really long time to boot for ONLY the first time after update so be patient.
  6. Help!! Brothers I have tried "hepics" 's method to update my i600 to wm6. For the first attempt, around the end of the process, it took a quite long time without any response. I then followed hepics's advice to unplug the battery for another reset... it does not help anymore. Then, I tried one more "flash" but the update hung at the end also. I have no choice but to flash it with the GD1 and GA2 version. However, during the updating "Phone" part, the phone screen shows the following messages. [Phone] Active OFF -> Active OFF [Phone] Reset Pin -> Low : OFF *[PHONE] Phone Download Failed! My phone does not have the phone function right now. What can I do??
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.