Jump to content

minty1978

Contributor Team
  • Content Count

    214
  • Joined

  • Last visited

Everything posted by minty1978

  1. minty1978

    Pixel 3 XL 64gb - White

    Selling my Pixel 3 XL 64gb in white. Purchased new in December. Comes with all original accessories including unused headphones. Genuine Google fabric case and DBrand Grip. It is in immaculate condition, no scratches, marks or dents. Looking for £500 inc RMSD to the UK only. Also have the Google wireless charger for £50.
  2. A house alarm review on MoDaCo? What's going on? Hold on though... this alarm is different, it's a smart alarm! The miGuard range of house alarms are made by Response Electronics, based in the UK. They were formed in 1990, and are now the UK's leading supplier of self installed intruder alarms. So let's open the boxes and see what makes this alarm so smart! What's in the box? The unit supplied comes in two boxes, one contains the external siren, the smaller box contains the control unit, one door/window sensor, one pet friendly movement sensor, two remotes and RFID tags. The first thing I noticed when removing the different parts of the kit is that the control panel is really nice to look at and touch, it's very modern looking. Installation and Setup It is necessary to read the instructions, but the ‘step by step’ order of the instructions are easy to follow and walk you through the setup in a sensible fashion. For this review, I used the supplied sticky pads to attach the door sensor to my front door, with a 45 second delay. This will allow enough time for me to turn the alarm off when entering the house. The IR movement sensor is positioned in the lounge on an immediate alarm. The supplied sensors come pre-paired to the control panel, however the external siren will need pairing. This was a simple enough process of pressing a button on the back of the siren, then the arm button on the control panel, the panel will then beep to confirm the pairing is complete. At this point I would recommend downloading the app from either the Apple app store, or Google Play for Android (sorry Windows phone users, no love for you). The control panel can be programmed without the app by text message (you will need to supply a SIM card for the unit regardless), but the app makes the process much easier. I was able to get the whole system set up within 30 mins, excluding fitment of the sensors and siren. Using the app, I was able to carry out all of the required steps to personalise the system including: • Rename the RFID tag users • Change the access delay time • Add numbers to notify on alarm trigger • Arm/Disarm the alarm • Record a voice memo As you can see from the messages above, I was being notified when the alarm was disarmed using the RFID tags. The system is armed by pressing the lock button on the control panel, or texting ‘1’ to the mobile number of your alarm panel. If you choose to arm via the app/SMS you will get an SMS reply to confirm the system has been armed. To disarm, hold your RFID tag in the circle of the control panel, or press unlock and enter your PIN code. When the alarm is triggered, as you would hope, it is pretty loud. You certainly wouldn’t be able to stay next to the control panel for too long before it became uncomfortable. Similarly, the external siren is certain to alert the local area that it has been activated. How pet friendly is it? Actually, pretty friendly. The instructions for the PIR sensor suggest if you are using it in a room where pets are permitted, you should mount the sensor vertical to the wall, and not tilt it. This basically means the sensor won’t be pointing down at your pet. In testing it worked well. I hid by the back door whilst the unit was in test mode, whilst Milo (our dog) walked around. The alarm was not triggered. As soon as I emerged from my hiding place, the sensor was triggered. Pros and Cons We like…. Simple to activate RFID and Remote keyfobs Smart controls through app/SMS Easy to set up SMS for low battery alerts of sensors and siren SMS alerts when deactivated by RFID Listen in or talk back to control panel Optional extras: Water/Flood detector, Smoke detector, Mini strobe siren and an IP camera We don’t like… You will need to supply your own SIM, and ensure you get reception in the location of your control panel (3 network is not compatible) No Windows phone App available Verdict A good looking, simple to setup home alarm system; it has the added benefit of SMS/App controls. In comparison to my current self-install home alarm system, the miGuard gives me the same security and peace of mind, but with the added benefits of remote control, and SMS alerts. I love the RFID tags. Imagine having family to stay at your house, and trying to explain the arm and disarm procedure. With the miGuard all they need to do is press the lock button when leaving, and flash the RFID tag at the control unit when they get back. Simple! I would suggest you count up the amount of door/window and PIR sensors you will need in advance of ordering. This kit came with one of each, however my current system has five window/door sensors and three PIR sensors. The additional sensors, and optional extras can be ordered from the Response website.
  3. A house alarm review on MoDaCo? What's going on? Hold on though... this alarm is different, it's a smart alarm! The miGuard range of house alarms are made by Response Electronics, based in the UK. They were formed in 1990, and are now the UK's leading supplier of self installed intruder alarms. So let's open the boxes and see what makes this alarm so smart! What's in the box? The unit supplied comes in two boxes, one contains the external siren, the smaller box contains the control unit, one door/window sensor, one pet friendly movement sensor, two remotes and RFID tags. The first thing I noticed when removing the different parts of the kit is that the control panel is really nice to look at and touch, it's very modern looking. Installation and Setup It is necessary to read the instructions, but the ‘step by step’ order of the instructions are easy to follow and walk you through the setup in a sensible fashion. For this review, I used the supplied sticky pads to attach the door sensor to my front door, with a 45 second delay. This will allow enough time for me to turn the alarm off when entering the house. The IR movement sensor is positioned in the lounge on an immediate alarm. The supplied sensors come pre-paired to the control panel, however the external siren will need pairing. This was a simple enough process of pressing a button on the back of the siren, then the arm button on the control panel, the panel will then beep to confirm the pairing is complete. At this point I would recommend downloading the app from either the Apple app store, or Google Play for Android (sorry Windows phone users, no love for you). The control panel can be programmed without the app by text message (you will need to supply a SIM card for the unit regardless), but the app makes the process much easier. I was able to get the whole system set up within 30 mins, excluding fitment of the sensors and siren. Using the app, I was able to carry out all of the required steps to personalise the system including: • Rename the RFID tag users • Change the access delay time • Add numbers to notify on alarm trigger • Arm/Disarm the alarm • Record a voice memo As you can see from the messages above, I was being notified when the alarm was disarmed using the RFID tags. The system is armed by pressing the lock button on the control panel, or texting ‘1’ to the mobile number of your alarm panel. If you choose to arm via the app/SMS you will get an SMS reply to confirm the system has been armed. To disarm, hold your RFID tag in the circle of the control panel, or press unlock and enter your PIN code. When the alarm is triggered, as you would hope, it is pretty loud. You certainly wouldn’t be able to stay next to the control panel for too long before it became uncomfortable. Similarly, the external siren is certain to alert the local area that it has been activated. How pet friendly is it? Actually, pretty friendly. The instructions for the PIR sensor suggest if you are using it in a room where pets are permitted, you should mount the sensor vertical to the wall, and not tilt it. This basically means the sensor won’t be pointing down at your pet. In testing it worked well. I hid by the back door whilst the unit was in test mode, whilst Milo (our dog) walked around. The alarm was not triggered. As soon as I emerged from my hiding place, the sensor was triggered. Pros and Cons We like…. Simple to activate RFID and Remote keyfobs Smart controls through app/SMS Easy to set up SMS for low battery alerts of sensors and siren SMS alerts when deactivated by RFID Listen in or talk back to control panel Optional extras: Water/Flood detector, Smoke detector, Mini strobe siren and an IP camera We don’t like… You will need to supply your own SIM, and ensure you get reception in the location of your control panel (3 network is not compatible) No Windows phone App available Verdict A good looking, simple to setup home alarm system; it has the added benefit of SMS/App controls. In comparison to my current self-install home alarm system, the miGuard gives me the same security and peace of mind, but with the added benefits of remote control, and SMS alerts. I love the RFID tags. Imagine having family to stay at your house, and trying to explain the arm and disarm procedure. With the miGuard all they need to do is press the lock button when leaving, and flash the RFID tag at the control unit when they get back. Simple! I would suggest you count up the amount of door/window and PIR sensors you will need in advance of ordering. This kit came with one of each, however my current system has five window/door sensors and three PIR sensors. The additional sensors, and optional extras can be ordered from the Response website. View full item
  4. minty1978

    Xiaomi Xiao Yi Smart camera review

    I've tried both QR and normal options on both Android and iPhone. Nothing happens, just a flashing orange light on the front. Any ideas?
  5. minty1978

    Xiaomi Xiao Yi Smart camera review

    I am getting the same problem currently @theShire hopefully it is just a temporary issue with the server. I'll try again in the morning..
  6. minty1978

    A quick specs poll...

    Great news...no HoneyComb...but there will be ice cream :P @AndyPadUK @mintymurray We're holding off HC in favour of Ice Cream Sandwich in a few months ;)
  7. minty1978

    A quick specs poll...

    hmmm it is a dilemma. I want a tablet, i'd like it to have honeycomb. But I really like what AndyPad is doing. Is there any chance it would run HC? If not that could be a deal breaker for me...but the price is damn attractive....
  8. thought i'd enter, but i never win anything.... :D
  9. minty1978

    3 Free HTC Unlock codes

    so i am guessing nothing ever came of this then? did anyone get their unlock code....did it work....does your phone still work?
  10. minty1978

    the flipclock

    i might tweet them...see what happens :D edit: tweet sent to @htc retweet if you are following me @mintymurray
  11. minty1978

    the flipclock

    great work kendon! Just hope it can be made to work in 2.1 roms eventually...that'd be nice :D
  12. minty1978

    [Bootscreen] MCR 1.2 (Updated 13/02/2010)

    that'd be a nice touch ;)
  13. minty1978

    3 Free HTC Unlock codes

    i dont think many people will be willing to post there IMEI for all the world to see....
  14. nice work paul! took a while to bake, but working great :) top work...can't wait for my nexus one to arrive...get bakin!
  15. minty1978

    Ordered!

    just ordered in the uk too! removed the UK adaptor....I dont use wall plugs :) not @ $20 anyway....
  16. minty1978

    How to unlock the bootloader on your Nexus One

    wowsers, google have listened!!! well done paul for finding this and bringing it to the masses :)
  17. minty1978

    The official T-Mobile G2 Touch 'Ask Paul' thread

    Hi Loz, Yes you will be able to update to the official T-mo rom, however you will lose ROOT and all of the extra functions that will give you.
  18. minty1978

    The official T-Mobile G2 Touch 'Ask Paul' thread

    Hi quatershade, The answer is.. maybe. Currently there is a flaw in the HBOOT on the hero that allows you to install a custom recovery img, and in turn load rooted roms. i think the latest Orange/HTC RUU already made an attempt to patch the problem, but there is already a way to defeat it. In future ROM updates, they might patch it completely. For what it is worth, I would root now..as Paul and other ROM modders will always buld new roms using the latest official/un-official rom available.
  19. minty1978

    Peep broken by Twitpocalypse

    wish mine was! I didn't realise i checked it so much.
  20. minty1978

    The official T-Mobile G2 Touch 'Ask Paul' thread

    why wait that long, my t-mobile g2 stayed unmodded for 45 mins...then on to MoDaCo Custom ROM.
  21. minty1978

    The official T-Mobile G2 Touch 'Ask Paul' thread

    110/405 does relate to the operator...
  22. hello, if you are using the 'peep' application, it will be down to that. Peep is suffering twitapocolypse...HTC are working with Twitter for a fix.
  23. good work paul. I cant wait to upgrade to hero in september. this willbe the first thing to do when the battery is charged :)
  24. minty1978

    Vodafone to buy out T-Mobile UK?

    I am fairly sure the monopolies and mergers people would block this.
  25. minty1978

    HTC launch HTC Hero with 'Sense' UI

    Woohoo, my contract is up start of september!!! sorry dream, your ditched for the Hero!!
×

Important Information

By using this site, you agree to our Terms of Use.