Jump to content

Dieca

Members
  • Content Count

    4
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Dieca

  • Rank
    Newbie

Profile Information

  • Your Current Device(s)
    ZTE BLADE - Orange SF - 2.2
  1. I had a hard way. But this informations I have collected: Q: All *.bin are down. How can I find (extract) the bin file A: Download the build you are searching for from the acerside (its a zip-file with an exe in it) , install it. Don't close the setup wizard open: C:\Program Files\Acer Inc\Acer LiquidMT Tool\acer_EuuDownload_Tool\acer_MergedOSFile that is the bin file you are looking for. My MT120S was bricked and I have installed the only bin a could find, with was an GEN2 (for Asia), now am not able to flash a other bin, because it doesn´t except a GEN1.bin. USB istn´t responding (so no ADB, AcerDownloadTool and no updateingtool is working) I only can use SD Card-mode. In SD Card Mode the S120 -checks the language (Gen1 or Gen2) so if you have already installed one of them>no chance -If you use a downgrade (4.001 installed, back to eg. 3.00x) you get an invalid file massage -If you use an upgrade (4.001 installed, up to 4.013) you get: "wrong MD5 checksum...are you a hacker" So. If YOU only see the "Acer"-logo and you aren´t able to boot or get into the recovery. Go to "SD Card mode" (Vol- and Cam and Power) Insert a SD Card and copy the !right! "...Gen1.bin" for Europe/US (or "....Gen2.bin") for Asia to the following folder (SdCard:\)acer_ug/acer_xx
  2. I had a hard way. But this informations I have collected: Q: All *.bin are down. How can I find (extract) the bin file A: Download the build you are searching for from the acerside (its a zip-file with an exe in it) , install it. Don't close the setup wizard open: C:\Program Files\Acer Inc\Acer LiquidMT Tool\acer_EuuDownload_Tool\acer_MergedOSFile that is the bin file you are looking for. My MT120S was bricked and I have installed the only bin a could find, with was an GEN2 (for Asia), now am not able to flash a other bin, because it doesn´t except a GEN1.bin. USB istn´t responding (so no ADB, AcerDownloadTool and no updateingtool is working) I only can use SD Card-mode. In SD Card Mode the S120 -checks the language (Gen1 or Gen2) so if you have already installed one of them>no chance -If you use a downgrade (4.001 installed, back to eg. 3.00x) you get an invalid file massage -If you use an upgrade (4.001 installed, up to 4.013) you get: "wrong MD5 checksum...are you a hacker" So. If YOU only see the "Acer"-logo and you aren´t able to boot or get into the recovery. Go to "SD Card mode" (Vol- and Cam and Power) Insert a SD Card and copy the !right! "...Gen1.bin" for Europe/US (or "....Gen2.bin") for Asia to the following folder (SdCard:\)acer_ug/acer_xx
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.