Jump to content

Android on Omnia II - i8000 (18.04.2011)


Guest almar

Recommended Posts

Guest xudsa II USERT
The download link works, it is just slow and you have to keep trying. It took me a while to get a connection. I guess many people are trying to get there hands on the new Froyo to test it out. (My download says 4.5 hrs to go, and I am on ADSL2+ !!) Patience! :)

Hmm... I get about 240kbps here. Took about 10min?

Link to comment
Share on other sites

Guest y17dt

I downloaded file. Followed instrucktions on XDA-page step by step.

Everything works brilliant.

No freeze, no SOD, fast, no probs with login to Googlemail...

So just PLEASE follow the instructions step by step!

I LOVE THIS!!!!!

Link to comment
Share on other sites

Guest l3ong91
I downloaded file. Followed instrucktions on XDA-page step by step.

Everything works brilliant.

No freeze, no SOD, fast, no probs with login to Googlemail...

So just PLEASE follow the instructions step by step!

I LOVE THIS!!!!!

And please thumbs up if it helps.

Link to comment
Share on other sites

Guest mavado
at the begining, i installed the old 3/2D and got the same error as you do. but with the new 2/3d driver from http://www.filesonic.com/file/732622911/o2b3update.tar.gz, i successfully boot it up. so use this new 2/3D patch.

Thnx for the driver, solved the boot problem. Original 2d/3d drivers (from main page) are not working.

Dev's thanks for this update!

Link to comment
Share on other sites

Guest bofff
Can someone of the DEV team fix the Sd.cpio.gz for the problem on mmcplk0p5 and mounting external storage ......

please do the mmcblk0p5 to mmcblk0p1

please please because i cant open the sd.cpio.gz

with this file

http://code.google.com/p/omnia2droid/downl...mp;can=2&q=

AND WHIT RENAME THE EXT4 TO EXT2

I CAN INSTALL IT ONLY ON SD CARD BECAUSE I HAVE MMCBLK0P5 PROBLEM AGAIN

+1

Link to comment
Share on other sites

Guest n4m3less

i have problem in market...i do log-in with youtube application..but when open market return a error "impossible connect on market"! solution?

Link to comment
Share on other sites

Guest mrozek
Okay now there's another problem.

My phone hangs at

 init: /init.rc: 280: yser option requires a user id
_[/codebox]

What partition table you have on your MyStorage?

Where are you going to install FROYO: sdcard or MyStorage.

If you have MyStorage with only 2 partitions: 0p1 (WinMo) and 0p2 (ext4), then give a try to MANUAL install. Follow the steps below:

- [Linux] untar ext4.tar.gz to the ext4 partition (e.g. /media/disk_/)

- [Linux/Win] modify 'startup.txt':

[code]Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init"[/code]

- [Linux/Win] copy 3 files: haret.exe. startup.txt and zImage to your WinMo partition

- [b]Important note:[/b] [Linux] untar o2b3update.tar.gz to your ext4 partition (auto update didn't work for me!)

- go to WinMo, run haret.exe.

- Be patient... Have fun.

Worked for me from 2nd attempt (1st was with auto update from o2b3update)

Link to comment
Share on other sites

Guest ashburn
What partition table you have on your MyStorage?

Where are you going to install FROYO: sdcard or MyStorage.

If you have MyStorage with only 2 partitions: 0p1 (WinMo) and 0p2 (ext4), then give a try to MANUAL install. Follow the steps below:

- [Linux] untar ext4.tar.gz to the ext4 partition (e.g. /media/disk_/)

- [Linux/Win] modify 'startup.txt':

Set CMDLINE "rootdelay=2 root=/dev/mmcblk0p2 init=/init"

- [Linux/Win] copy 3 files: haret.exe. startup.txt and zImage to your WinMo partition

- Important note: [Linux] untar o2b3update.tar.gz to your ext4 partition (auto update didn't work for me!)

- go to WinMo, run haret.exe.

- Be patient... Have fun.

Worked for me from 2nd attempt (1st was with auto update from o2b3update)

I'm doing the same like you are doing it. Except i copy everything instead of copy 3 files... i will try to delete the file and see what i can do..

edit: i have the request_suspend_state: wakeup issue now. With new 3D drivers also it shows me that.

Edited by ashburn
Link to comment
Share on other sites

Guest xudsa II USERT
Try to untar 3D drivers manualy, then boot Froyo again.

Ok, thanks, trying now..

Edit: Still doesn't work, I'm using My Storage manual installation, any help? Thanks!

Edited by xudsa II USERT
Link to comment
Share on other sites

Guest mrozek
I'm doing the same like you are doing it. Except i copy everything instead of copy 3 files... i will try to delete the file and see what i can do..

edit: i have the request_suspend_state: wakeup issue now. With new 3D drivers also it shows me that.

I had the same msg and then untar new 3D drivers manualy. After that system booted up properly. Check if you have all the files in the /system folder on your ext4 partition. Good luck.

Link to comment
Share on other sites

Guest mavado
Ok, thanks, trying now..

Edit: Still doesn't work, I'm using My Storage manual installation, any help? Thanks!

I first installed the old 3d drivers...but didn't work, then installed the new 3d drivers and this worked for me using the sd card installation method. But untar should work also. Maybe try both the drivers ? don't know if the same files are used.

Link to comment
Share on other sites

Guest xudsa II USERT
I first installed the old 3d drivers...but didn't work, then installed the new 3d drivers and this worked for me using the sd card installation method. But untar should work also. Maybe try both the drivers ? don't know if the same files are used.

OK will try, thanks!

EDIT: Damn, still don't work! Thanks anyway...

Edited by xudsa II USERT
Link to comment
Share on other sites

Guest ashburn
I had the same msg and then untar new 3D drivers manualy. After that system booted up properly. Check if you have all the files in the /system folder on your ext4 partition. Good luck.

it's not working still.. :)

Link to comment
Share on other sites

Guest l3ong91

Anyone manage to find their SD card after rebbot back to Win Mo? Because I can't find my SD card directory after rebooted back to Win Mo...please someone try

Link to comment
Share on other sites

Guest dimon40001

Can't open ext4.tar.gz under Ubuntu Live 10.10.

It says

gzip: stdin: invalid compressed data, format violated

tar: unexpected EOF in archive

Archive is good, tested under WinMo with 7-Zip.

I guess, I should update tar/gzip version in Ubuntu? How?

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.