• Announcements

    • Reminder - MoDaCo position on illegal content   07/30/15

      ILLEGAL CONTENT I'd like to just reaffirm MoDaCo's position regarding piracy and illegal content in the light of some recent questions / postings. Posts will be censored by myself or my moderation team if the contain or link to: Illegal / pirated / cracked software or sites that host such softwareNintendo emulators / ROMs or sites hosting them (in light of Nintendo's legal stance)CUSTOM ROMS You may discuss and post links to custom device ROMs on MoDaCo, provided the following rules are adhered to: ROMs must not contain any illegal 3rd party software (this includes trial versions included without permission)ROMs must give full credit to the original authorISSUES If you have any issues with this policy, please contact PaulOBrien directly via PM.
    • Reminder: Selling items on the forum directly is not allowed   07/30/15

      Please note that selling items on the forum directly is not allowed by the forum rules. There is a forum for eBay auctions whereby you can list the items on eBay and link to them there. This is the ONLY forum for this type of activity. You may also advertise links to the eBay forum in your signature. Please note that selling directly in contravention of these rules will result in a warning / suspension / ban.

Definitive guide to debranding your WM5 i600

20 posts in this topic

Posted (edited)

Ok folks, here's the definitive guide to debranding your Orange (or indeed any other carrier) moby to a shiny new generic version of WM5. After reading various posts floating around on the Web, it seemed most of them were a cut and paste job from the Samsung i600 Firmware Updates thread here that tends to gloss over the WM5 bit and misses out on a few key points for debranding. After having followed those instructions and come across a few anomalies, I decided to provide a more comprehensive step-by-step guide that explains the WM5 debranding process in detail and covers the different steps people need to take depending upon their existing setup.

Please note, this is a guide to debrand your existing WM5 moby to the generic WM5 firmware only. This guide does not contain instuctions on how to upgrade from WM5 to WM6, WM6 to WM5 or WM2003 to WM5. The usual disclaimers apply, any firmware upgrade is done at your own risk and flashing your handset will delete all existing data from the handset.

If it all goes pear shaped, please write an angry letter of complaint to Bottler Brown, 10 Downing Street, London, demanding he calls a general election so we can be rid of these tax grabbing cronies. I mean, what kind of idiot would sell off half the UK gold reserves at a knock down price and be stupid enough to tell the world beforehand so everyone else shorts gold, it really does ... (snip, Ed)

Ok, here we go.

WHAT YOU WILL NEED

  • A Samsung i600 handset with fully charged battery.
  • Samsung USB data cable for i600 (usually supplied with the handset).
  • A Windows XP PC with a spare USB port.
  • European WM5-Firmware i600XXGD1 "No-Brand" firmware that you can download from the MoDaCo i600 Wiki

    Note: ActiveSync is *NOT* needed for the firmware upgrade
    1. Before you do anything, it's worth checking your existing firmware version. On your i600, choose Start - Settings - More - More - Version to see your current build. The hideous Orange UK branded firmware that I had on mine was i600BVGD2.


    2. From the Modaco i600 Wiki, download the European WM5-Firmware i600XXGD1 "No-Brand" firmware and unpack the Firmware_i600XXGD1.rar file into a temporary directory. This contains the generic firmware along with the necessary Samsung mobile modem driver for the install.


    3. In the temporary directory, go to the Firmware i600XXGD1\BlackJack Modem Driver\SAMSUNG_MODEM\ directory and run the Setup.exe file there to install the Samsung mobile modem driver. Once complete, reboot your PC for good measure.


    4. Ensure your i600 battery is fully charged, the handset is switched off and also that the USB port you intend to use for the upgrade is working.


    5. If you do not have ActiveSync installed, skip this step and carry on with step 1 of DEBRAND below. If you have ActiveSync already installed, sync your device to copy across all your existing contacts and information as the upgrade will delete everything from your handset. When done, go to "Connection Settings" in ActiveSync and disable the USB connection.

      Note: ActiveSync is *NOT* needed for the firmware upgrade and does *NOT* need to be installed to upgrade your handset
    DEBRAND

[*] Double click the i600XXGD1_REV15.exe program that you unpacked into the temporary directory to start the debrand process. The following screen will display:

post-55546-1209981105_thumb.jpg

[*] Follow the instructions in the i600XXGD1_REV15.exe program by first connecting your i600 to the PC using the USB data cable and then switching on the handset in reflashing mode by pressing the power key, right hand soft key and side mounted (underneath the wheel) back key together. The MoDaCo i600 Wiki shows a picture of the keys you need to press to enter the reflashing mode. If you have switched on the handset in reflash mode, your i600 will display:

* USB Downloader - Open v1.1


USB Initial: OK

Tx > USB_READY_COMMAND - 2


[Phone] Active OFF
[*] The i600XXGD1_REV15.exe program will say device found and the Start button will be enabled. If it does not say this and the Start button remains greyed out, exit the program and reinstall the modem drivers from PREPARATION step 3 above. [*] Click the Start button to begin the OS download. This takes approximately 5 minutes and the progress bar on both the i600 and i600XXGD1_REV15.exe program will show you how much of the process is complete. [*] After the OS download has finished, your PC will say that a new Samsung device has been found and the i600 handset will show a time counter in the bottom left hand corner with 3 numbers spinning rapidly. The i600XXGD1_REV15.exe program will say:
[PDA]OS image download complete.

[PHONE] Attempting to Open COM4...

[PHONE] 1. Opening COM4: id[0].
Note: your COM port may be different depending upon the USB port your i600 is connected to Now it is at this particular stage that many people have problems and I'll explain why. Up until now, all that has been done is that the OS has been downloaded to the i600. This next part requires that the existing firmware is deleted. However, it can only do this once the new Samsung device has been found by XP due to the upgrade. Therefore, the i600 hangs at this stage with the spinning numbers because once the OS is downloaded, the program is immediately looking for the new Samsung device to delete the existing firmware. As XP takes a few moments to install and recognise the necessary drivers for the new Samsung device, the program hangs and reports a COM port failure as it can't find the device. Other posts have reported that you simply pull the battery and restart your i600 as normal to complete the process. This will indeed restart your i600 with the new XXGD1 generic firmware but will not have completely removed the old firmware and you can see this by going to Start - Settings - More - More - Version on your i600 to see the current build that will still show your old firmware version in the "Phone" field. The way round this is to repeat the DEBRAND procedure as now that the new Samsung device has been successfully installed and recognised by XP, it won't hang after the OS download and will be able to immediately continue with the deletion of the old firmware. [*] Repeat DEBRAND procedure steps 1-4 above. [*] Once the OS download has finished, the process will move onto downloading the code and deleting your existing firmware. As before, a counter will appear in the bottom left hand corner of the i600 screen with spinning numbers. This download code and deletion bit takes approximately 5 minutes and the progress bar on both the i600 and i600XXGD1_REV15.exe program will show you how much of the process is complete. [*] Once complete, this concludes the update program and your i600 will now restart and go through the process of rebooting normally with the new unbranded XXGD1 firmware. You can check this by going to Start - Settings - More - More - Version on your i600 where you should see that PDA, PHONE and EBOOT now all report i600XXGD1 as the firmware. And yes, the new generic build does include Pocket MSN :D For reference, here is the complete output of the i600XXGD1_REV15.exe program from start to finish once it has been run the second time (from step 6 of the DEBRAND procedure)
[StartDownload => 0] StartDownload !!

[PDA] Connect and Power-on the Device.

[PDA-0]Driver Opened.

[PDA]Read Wait. = [0] 

[PDA]Read Done. = [0] 

[PDA]Device Found. = [0] 

[PDA]Eboot data length = <1100KB>

[PDA]EBoot data download ready.

[PDA] EBoot download complete.

OsImage data length = <65781KB>

[PDA]OsImage data download ready.

[PDA]OS image download complete.

[PHONE] Attempting to Open COM4...

[PHONE] 1. Opening COM4: id[0].

[PHONE] Opening COM 4 Succeed...id[0]

Param.nNumRegions = (7)dwWriteLen = <-1>[PHONE-0] [COM4]Wait for Erasing CODE area

[PHONE] [COM4]Erasing CODE area Complete.

[nTotalPkt = 10627] [COM4] Complete.

dwWriteLen = <16384>[PHONE-0] [COM4]Wait for Erasing BOOT area

[PHONE] [COM4]Erasing BOOT area Complete.

[nTotalPkt = 16] [COM4] Complete.

dwWriteLen = <16384>[PHONE-0] [COM4]Wait for Erasing QCSBLHD area

[PHONE] [COM4]Erasing QCSBLHD area Complete.

[nTotalPkt = 16] [COM4] Complete.

dwWriteLen = <65536>[PHONE-0] [COM4]Wait for Erasing QCSBL area

[PHONE] [COM4]Erasing QCSBL area Complete.

[nTotalPkt = 64] [COM4] Complete.

dwWriteLen = <196608>[PHONE-0] [COM4]Wait for Erasing OEMSBL area

[PHONE] [COM4]Erasing OEMSBL area Complete.

[nTotalPkt = 192] [COM4] Complete.

dwWriteLen = <262144>[PHONE-0] [COM4]Wait for Erasing SECDLOAD area

[PHONE] [COM4]Erasing SECDLOAD area Complete.

[nTotalPkt = 256] [COM4] Complete.

[COM4]PHONE Download complete.

And that's it, if anyone has any questions, queries, complaints, revolutionary ideas to get rid of Bottler Brown, please post here, will do my best to help.

Regards,

Dark Horse

Edited by Dark Horse
0

Share this post


Link to post
Share on other sites

Posted

I did all the steps and i currently have wm5 i600xxgd1 but when i tried to put a vodafone sim it tells me that this phone works with a specific operator...my question ist....did i made a mistake or is this normal? Thank you!

0

Share this post


Link to post
Share on other sites

Posted (edited)

I did all the steps and i currently have wm5 i600xxgd1 but when i tried to put a vodafone sim it tells me that this phone works with a specific operator...my question ist....did i made a mistake or is this normal? Thank you!

It sounds as if your original handset might have been SIM locked, where did you buy your i600 from and do you know if it was unlocked so you could use it with any operator?

Regards,

Dark Horse

Edited by Dark Horse
0

Share this post


Link to post
Share on other sites

Posted

I bouth it from an orange store in bucharest....wenn i type *#7465625* under Lock Status Information it tells me that it`s Network Locked....all the others are set to disable....so what`s the network code?(Orange, Romania)

0

Share this post


Link to post
Share on other sites

Posted

I bouth it from an orange store in bucharest....wenn i type *#7465625* under Lock Status Information it tells me that it`s Network Locked....all the others are set to disable....so what`s the network code?(Orange, Romania)

Well if you bought it from an Orange shop, it's most likely locked to Orange! If you call Orange, they should be able to unlock it for you but may charge a fee. Otherwise, there are plenty of online services offering cheap remote unlocking.

Regards,

Dark Horse

0

Share this post


Link to post
Share on other sites

Posted

Excellent post!! Am I right in assuming that once the Orange handset has been 'debranded' and a generic WM5 rom installed that the WM6 upgrade using the Samsung service can now be carried out?

0

Share this post


Link to post
Share on other sites

Posted

Excellent post!! Am I right in assuming that once the Orange handset has been 'debranded' and a generic WM5 rom installed that the WM6 upgrade using the Samsung service can now be carried out?

Yes, to upgrade an Orange handset to WM6, you first need to debrand it using the generic WM5 ROM as per above. See this thread here for instructions on how to update the generic WM5 firmware to WM6.

Regards,

Dark Horse

0

Share this post


Link to post
Share on other sites

Posted (edited)

Yes, to upgrade an Orange handset to WM6, you first need to debrand it using the generic WM5 ROM as per above. See this thread here for instructions on how to update the generic WM5 firmware to WM6.

Regards,

Dark Horse

Hi Dark Horse, i tried installing wm6 using the method above, and now the phone doesnt work. when i turn it on, the green windows screen comes on, and then the at&t logo shows up for a minute, and then turns off right after. ive tried debranding it by pushing the rsk power and side button again, but the screen shows "usb downloader - at &t"

any idea how to fix this?

thanks in advance

Edited by boow_03
0

Share this post


Link to post
Share on other sites

Posted

Hi Dark Horse, i tried installing wm6 using the method above, and now the phone doesnt work. when i turn it on, the green windows screen comes on, and then the at&t logo shows up for a minute, and then turns off right after. ive tried debranding it by pushing the rsk power and side button again, but the screen shows "usb downloader - at &t"

any idea how to fix this?

thanks in advance

Hi there,

Sorry, this thread is for debranding your i600 with a generic WM5 firmware only, it has nothing to do with WM6. If you've got any WM6 upgrade questions, post on the relevant thread here.

Regards,

Dark Horse

0

Share this post


Link to post
Share on other sites

Posted (edited)

Great step-by-step Guide! Very easy to follow.

Thank you so much, I've been looking for ages a serious post on how to debrand my i600 (i600BVGD2 as well).

Everything happens as it's described, even Debrand step 5 :D

And now I have a very nice looking WM5 that I will try to upgrade to WM6...

[edit : successful upgrade to WM6 following :]

Sorry, this thread is for debranding your i600 with a generic WM5 firmware only, it has nothing to do with WM6. If you've got any WM6 upgrade questions, post on the relevant thread here.

One error though : step 2 says to connect the phone and step 4 says to connect the phone too... you might just edit that Dark Horse^^

I was so stressed to brick my phone that I was a bit confused : "OMG! Did I miss anything?"

Again! Thanks!

Kind regards,

$killeyes

Edited by Skilleyes
0

Share this post


Link to post
Share on other sites

Posted

One error though : step 2 says to connect the phone and step 4 says to connect the phone too... you might just edit that Dark Horse^^

Welcome to the forums and thanks for the heads-up Skilleyes, I've amended the instructions as requested.

Kind Regards,

Dark Horse

0

Share this post


Link to post
Share on other sites

Posted

Hello,

I did the debranding and at the end i get a error:

[Phone] Active OFF -> Active OFF

[Phone] Reset Pin -> Low : OFF

*[PHONE] Phone Download Failed!

Now the phone module is not working. In rest is ok,but no signal, no operator, nothing. Is like the device dosen't have the phone function.

Any idea?

Here is the log of reflash:

[startDownload => 0] StartDownload !!

[PDA] Connect and Power-on the Device.

[PDA-0]Driver Opened.

[PDA]Read Wait. = [0]

[PDA]Read Done. = [0]

[PDA]Device Found. = [0]

[PDA]Eboot data length = <1100KB>

[PDA]EBoot data download ready.

[PDA] EBoot download complete.

OsImage data length = <73460KB>

[PDA]OsImage data download ready.

[PDA]OS image download complete.

[PHONE] Attempting to Open COM13...

[PHONE] 1. Opening \\.\COM13 id[0].

[PHONE] Opening COM 13 Succeed...id[0]

Param.nNumRegions = (7)dwWriteLen = <-1>[PHONE-0] [COM13]Wait for Erasing CODE area

[PHONE] [COM13]Erasing CODE area Complete.

[nTotalPkt = 10651] [COM13] Complete.

This is the log when i try to put the WM6 ROM, but i have the same problem at WM5 debranding ROM.

Please help!

0

Share this post


Link to post
Share on other sites

Posted

Hello,

I did the debranding and at the end i get a error:

[Phone] Active OFF -> Active OFF

[Phone] Reset Pin -> Low : OFF

*[PHONE] Phone Download Failed!

Now the phone module is not working. In rest is ok,but no signal, no operator, nothing. Is like the device dosen't have the phone function.

Any idea?

Here is the log of reflash:

[startDownload => 0] StartDownload !!

[PDA] Connect and Power-on the Device.

[PDA-0]Driver Opened.

[PDA]Read Wait. = [0]

[PDA]Read Done. = [0]

[PDA]Device Found. = [0]

[PDA]Eboot data length = <1100KB>

[PDA]EBoot data download ready.

[PDA] EBoot download complete.

OsImage data length = <73460KB>

[PDA]OsImage data download ready.

[PDA]OS image download complete.

[PHONE] Attempting to Open COM13...

[PHONE] 1. Opening \\.\COM13 id[0].

[PHONE] Opening COM 13 Succeed...id[0]

Param.nNumRegions = (7)dwWriteLen = <-1>[PHONE-0] [COM13]Wait for Erasing CODE area

[PHONE] [COM13]Erasing CODE area Complete.

[nTotalPkt = 10651] [COM13] Complete.

This is the log when i try to put the WM6 ROM, but i have the same problem at WM5 debranding ROM.

Please help!

Not sure about this, is your handset an i600? Have you tried reflashing?

0

Share this post


Link to post
Share on other sites

Posted

Not sure about this, is your handset an i600? Have you tried reflashing?

Yes, it is a i600. And i try to reflash many times but the same. The same result is with a WM6 ROM.

The PDA part is working but no phone part, he can see the SIM and ther's no operator to select.

At the version info at Phone is not show anything.

Here is a treat about this problem http://www.modaco.com/content-page/257857/...0-help/page/20/ but no solution 'till today.

What can i do?

0

Share this post


Link to post
Share on other sites

Posted

Hello,

I did the debranding and at the end i get a error:

[Phone] Active OFF -> Active OFF

[Phone] Reset Pin -> Low : OFF

*[PHONE] Phone Download Failed!

Now the phone module is not working. In rest is ok,but no signal, no operator, nothing. Is like the device dosen't have the phone function.

Any idea?

Here is the log of reflash:

[startDownload => 0] StartDownload !!

[PDA] Connect and Power-on the Device.

[PDA-0]Driver Opened.

[PDA]Read Wait. = [0]

[PDA]Read Done. = [0]

[PDA]Device Found. = [0]

[PDA]Eboot data length = <1100KB>

[PDA]EBoot data download ready.

[PDA] EBoot download complete.

OsImage data length = <73460KB>

[PDA]OsImage data download ready.

[PDA]OS image download complete.

[PHONE] Attempting to Open COM13...

[PHONE] 1. Opening \\.\COM13 id[0].

[PHONE] Opening COM 13 Succeed...id[0]

Param.nNumRegions = (7)dwWriteLen = <-1>[PHONE-0] [COM13]Wait for Erasing CODE area

[PHONE] [COM13]Erasing CODE area Complete.

[nTotalPkt = 10651] [COM13] Complete.

This is the log when i try to put the WM6 ROM, but i have the same problem at WM5 debranding ROM.

Please help!

PROBLEM SOLVED!!!

Ok, i have solve the problem, with some help from here: http://www.modaco.com/content-page/257857/...0-help/page/20/

The drivers for my i600 was the problem.

It seems that Windows failed to found the drivers for the phone part of my device, without notice me about that, that was the reason why the device failed to download the phone part. The drivers from Modaco Samsung i600 wont work for me.

I have downloaded the Samsung Composite Drivers and it work.

The drivers can be found here http://forum.xda-developers.com/showthread...968&page=40, at post 400.

All the best to all and i will keep the connection!

0

Share this post


Link to post
Share on other sites

Posted

PROBLEM SOLVED!!!

Ok, i have solve the problem, with some help from here: http://www.modaco.com/content-page/257857/...0-help/page/20/

The drivers for my i600 was the problem.

It seems that Windows failed to found the drivers for the phone part of my device, without notice me about that, that was the reason why the device failed to download the phone part. The drivers from Modaco Samsung i600 wont work for me.

I have downloaded the Samsung Composite Drivers and it work.

The drivers can be found here http://forum.xda-developers.com/showthread...968&page=40, at post 400.

All the best to all and i will keep the connection!

Interesting, wonder why the Wiki drivers didn't work for you though B)

0

Share this post


Link to post
Share on other sites

Posted

Interesting, wonder why the Wiki drivers didn't work for you though B)

Yes, is strange, it works for many. But for those whit this problem i think this is the reason. At the point where the PDA download is finish and the old firmware is deleted and the device should start the download for the phone part, whit the drivers from modaco, windows has not detected a new hardware ("Samsung CDMA phone...???", or something like that), like it happed now, after i installed those drivers.

I'm happy that i solve this problem and i apperciate your help.

I still need one more thing. I searching the "Windows Basic Home Screen" from WM5 version, at the same theme from WM6 the colors is not the same and i dont like that combination. I will try to edit the .xml file for this theme when i will have time.

Thanks :(

0

Share this post


Link to post
Share on other sites

Posted

Interesting, wonder why the Wiki drivers didn't work for you though B)

One more thing:

At step 5 on your description:

"After the OS download has finished, your PC will say that a new Samsung device has been found and the i600 handset will show a time counter in the bottom left hand corner with 3 numbers spinning rapidly. The i600XXGD1_REV15.exe program will say:

CODE[PDA]OS image download complete.

[PHONE] Attempting to Open COM4...

[PHONE] 1. Opening COM4: id[0]."

I wait a while and i pull of the cable from the phone and then put'it back in and the program detected the phone and it start downloading WHILE AT THE PHONE SCREEN IS NOT SHOW ANYTHING UNTIL IS COMPLETED!

After that the phone restart and everything it was ok.

0

Share this post


Link to post
Share on other sites

Posted

Yes, is strange, it works for many. But for those whit this problem i think this is the reason. At the point where the PDA download is finish and the old firmware is deleted and the device should start the download for the phone part, whit the drivers from modaco, windows has not detected a new hardware ("Samsung CDMA phone...???", or something like that), like it happed now, after i installed those drivers.

I'm happy that i solve this problem and i apperciate your help.

I still need one more thing. I searching the "Windows Basic Home Screen" from WM5 version, at the same theme from WM6 the colors is not the same and i dont like that combination. I will try to edit the .xml file for this theme when i will have time.

Thanks B)

What version of Windows were you using to flash the i600 with? Seems like the drivers on the Wiki might not be fully compatible with Vista or versions of XP (I used XP with service pack 1 to flash).

Re: step 5, I recall trying this and it didn't work for me so again, perhaps it's specific to the composite driver you used?

0

Share this post


Link to post
Share on other sites

Posted

What version of Windows were you using to flash the i600 with? Seems like the drivers on the Wiki might not be fully compatible with Vista or versions of XP (I used XP with service pack 1 to flash).

Re: step 5, I recall trying this and it didn't work for me so again, perhaps it's specific to the composite driver you used?

Last night i flash' it on XP Professional SP3. Before i try on XP Professional SP3, SP1 and XP Home Edition SP2, without success with old drivers.

I don't know about the 5 step if this was a driver consequence.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2015. MoDaCo uses IntelliTxt technology.