Jump to content

[RECOVERY] : ClockworkMod Recovery for ZTE Racer


Guest Sebastian404

Recommended Posts

Guest Sebastian404

Please find attached *MY* build of the latest version of Koush's ClockworkMod Recovery for the ZTE-Racer. It is not officially supported by Koush, please do not bother him with support questions for this build.

I have tested it as much as I can, but I'm always open to any more constructive feedback. Please see one post down for a change log for THIS build. Koush seems not to publish a change log (unless you know of one).

To install:

  • Recovery Manager
      Download the img file to your SD card, and then you can use the Recovery Manager application to install your recovery.

    • fastboot method
      • Unplug the USB cable, turn off your device and take out the battery
      • Replace the battery and turn the device on holding the 'volume up' key. The device will stay at the 'green android' screen.
      • Plug the device into the PC.
      • From a command prompt run 'fastboot flash recovery <filename>.img'
      • When this finishes, from the command prompt run 'fastboot reboot'

      • update.zip method
          If you have a previous version or another recovery install, install the update.zip and restart your device.

          • restart your device holding down the 'volume down' key
          • Use the Recovery Manager application to Reboot into Recovery
          • if you have ADB configured type 'adb reboot recovery' from the command line.
              The Latest version of Clockworkmod Recovery can found here

              • Older versions of Clockwork recovery can be found here.
              • Official release

                  [*]The offical version of ClockworkMod Recovery if available for this device can be found here

                  Which version:

                    [*]ClockworkMod Recovery now comes in 2 different versions for 1st and 2nd Generation devices, if your device originaly shipped with Android 2.1, it will usually be 1st generation, if it came with 2.2 it will usually be 2nd generation. Please note if you have used an officaly updater on a 1st generation device it will now be a 2nd generation device.

                    Warning:

                      [*]Support for the old style update files that use the Amend scripting (update-script) method is no longer supported With ClockworkMod Recovery from v3 onwards, if you require support for the Amend scripting method, use v2.5.1.8.

                      Source

                        [*]The Device Config to build ClockworkMod Recovery as part of CyanogenMod can be found on my GitHub.

                        Kernel Information

                          [*]Information about the Kernel used in this ROM can be found on this thread.

Edited by Sebastian404
Link to comment
Share on other sites

Guest Sebastian404

Know issues:

USB support is not always initialized correctly, select the 'Reboot Recovery' option under 'advanced' menu option

Build Change Log:

2011-02-07 - v2.5.1.8 b1 - Initial release

2011-02-07 - v3.0.0.5 b1 - Initial release

2011-02-16 - v3.0.0.6 b1 - Initial release

2011-03-12 - v3.0.1.4 b1 - Initial release

2011-04-01 - v3.0.2.4 b1 - Initial release

2011-04-01 - v3.0.2.4 b1 - upgraded to 2.6.32 kernel for easy of deployment

2011-04-01 - v3.0.2.4 b1 - two versions of recovery image to support Generation 1 & 2 devices

2011-04-14 - v3.0.2.4 b2 - usb problem resolved

2011-04-25 - v3.0.2.8 b1 - Initial release

Edited by Sebastian404
Link to comment
Share on other sites

Guest atiatinini

Thanks, the v3.0.0.5 works great but the v2.5.1.8 doesn't...

It just stays in the android icon.

EDIT: Forget it, I've tried again and now it works.

Edited by atiatinini
Link to comment
Share on other sites

  • 2 weeks later...
Guest smg22rus

v2.5.1.8 recovery have error. Its not work correct. Please, upgrade it. Sorry for my bad english.

Part of logfile with error:

Starting recovery on Sat Feb 19 08:03:38 2011

framebuffer: fd 4 (240 x 320)

ClockworkMod Recovery v2.5.1.8

mount: mounting /dev/block/mtdblock3 on /cache failed: Invalid argument

E:Can't mount /dev/block/mtdblock3

(File exists)

E:Can't mount CACHE:recovery/command

I:Set boot command "boot-recovery"

Command: "/sbin/recovery"

Edited by smg22rus
Link to comment
Share on other sites

Guest Sebastian404
I rebuild you recovery of 2.5.1.8 version...

ERROR: Can't mount /dev/block/mtdblock3 - it is for system NO CACHE/ for cache mtdblock4 :huh: =*

I am fairly sure that mtd3 is /cache

looking at my device right now...

dev:	size   erasesize  name
mtd0: 00480000 00020000 "recovery"
mtd1: 00480000 00020000 "boot"
mtd2: 00060000 00020000 "misc"
mtd3: 00c80000 00020000 "cache"
mtd4: 09600000 00020000 "system"
mtd5: 127e0000 00020000 "userdata"
mtd6: 00180000 00020000 "persist"[/code]

I also checked the dump from the RS_VIPV1.0.0B01 device.. its the same layout...

Have you got a racer or a link? I've heard the ZTE Link is different....

Edited by Sebastian404
Link to comment
Share on other sites

Guest predo1306
Can someone explain how this is installed, thanks in advance

jaooo understand about I managed super thing and doing awesome! thanks and sorry I did not just skilled and English we neide very well, I'm from Serbia

Link to comment
Share on other sites

  • 2 weeks later...
Guest Ang3l0912
Sorry!

Is the shuaidi :3.0.0.5

Upgrade 3.0.1.4?2.2 support it?

google translation :D

new recovery as far as i can see has one extra feature which is power off

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
Guest Tarciso
(...)

To install:

  • Recovery Manager
    • Download the img file to your SD card, and then you can use the
    Recovery Manager application to install your recovery.

    (...)

Downloads:

[*]recovery-clockwork-3.0.2.4-mooncake-g1.img - MD5: 7877d843c3c7a75827fb01b9eb9e9796

[*]recovery-clockwork-3.0.2.4-mooncake-g1-update_signed.zip - MD5: e9ff2b55862bbeb1f009127e8747d1af

[*]recovery-clockwork-3.0.2.4-mooncake-g2.img - MD5: ff3f48d43080b31cd04d5b717e575adb

[*]recovery-clockwork-3.0.2.4-mooncake-g2-update_signed.zip - MD5: 431145cbcc06723e950d4bbbd9c7f111

Previous versions:

[*]Older versions of Clockwork recovery can be found here.

Sorry, but which file whould I download?

This is what I'm running here:

5608797288_d04fe643de.jpg

Captura de tela inteira 11042011 001922 by contato.tarciso, on Flickr

Link to comment
Share on other sites

Guest Sebastian404
Sorry, but which file whould I download?

This is what I'm running here:

5608797288_d04fe643de.jpg

Captura de tela inteira 11042011 001922 by contato.tarciso, on Flickr

First thing you need to do is use ROMDUMP http://android.podtwo.com/romdump/ to dump your rom and then upload it somewhere for me, we dont' have that version in the stock roms.

After that, you need to install the g1 version

Link to comment
Share on other sites

Guest Sebastian404
I try to apply the recovery image using Recovery Manager but it comes up as Unrecognised...

did you do an 'update database' ?

Link to comment
Share on other sites

Know issues:

USB support is not always initialized correctly, select the 'Reboot Recovery' option under 'advanced' menu option

Build Change Log:

2011-04-01 - v3.0.2.4 b1 - two versions of recovery image to support Generation 1 & 2 devices

2011-04-14 - v3.0.2.4 b2 - usb problem resolved

How should I find out what is my phone generation? Or plain simple: how to determine which one of these two updates to use?

Link to comment
Share on other sites

Guest baskin
How should I find out what is my phone generation? Or plain simple: how to determine which one of these two updates to use?

I have the exact same question.

Link to comment
Share on other sites

  • 2 weeks later...
Guest equiliym

hey sebastian, id like to ask about gen1 and gen2 too, whats the difference? tho installed and using newest mooncake recovery, thanks

Link to comment
Share on other sites

Guest Hoofprint

:mellow: forgive me, is there any chance your clockwork will support the aussie racer, i maybe a little slow and it already does.

but no matter how hard i try recovery-clockwork-3.0.2.4-mooncake-gen1.img is the only one that loads for me and the buttons dont work, 1/2 the screens missing.

its driving me crazy i need to get rid of the telstra bloatware =)

model - T3020

Firmware version: 2.1-update1

Baseband version: T3020 T01

Kernel version: 2.6.29 zte-kernel@Zdriod-SMT

Build No: T3020 T03

if you need a phone dump ill send one asap

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.