Guest h00pyfr00d Posted February 3, 2003 Report Share Posted February 3, 2003 Hi all. I know this has been pretty much covered, but here's a guide I got straight from Orange (From the horses mouth as it were): Setting up Orange GPRS on Pocket PC 2002 via Infrared with the SPV On the SPV From the Home screen, press Programs Scroll to Accessories and press Action (depending on how your Programs menu is configured you may need to press More a number of times) Scroll to Modem Link and press Action You will be displayed an information message warning that ActiveSync may not function properly if Modem Link is active. Press OK Set the Connection option to IrCOMM Press Menu Scroll to Activate and press Action Press Home On the Pocket PC Place the infrared port on the SPV in line with the infrared port on the Pocket PC Tap on Start and then Settings Tap on the Connections tab at the bottom of the screen Tap on the Connections icon Tap on the Dialing Locations tab Tap on Dialing Patterns Ensure that all three fields are set to G only Tap OK Tap on the Connections tab Drop down the Internet Settings menu and select New Enter a name for the connection Tap on the Modems tab Tap on New Enter a name for the connection here also Ensure that the connection device is set to Generic IrDA Modem Set the speed to 19200 Tap Next Ensure that the Country Code and Area Code fields are blank Enter *99# in the Phone Number field Tap Next Untick the option to Wait for dial tone before dialing In the Extra dial string modem commands box enter the following: +CGDCONT=1,”IP”,”orangeinternet”,””,0,0 Tap Finish Tap OK Establishing the connection Tap on Start and then Settings Tap on the Connections tab at the bottom of the screen Tap on the Connections icon From the Internet Settings drop-down menu select the connection you created above Tap on Connect You will be prompted for a user name and password, leave all fields blank and tap Connect Link to comment Share on other sites More sharing options...
Guest Lojt Posted February 5, 2003 Report Share Posted February 5, 2003 It sits at the Ipaq connection screen, saying: "Status: Dialing 'T*99#'" for a while, then it says: No carrier detected. Verify phone number and then try again. Link to comment Share on other sites More sharing options...
Guest h00pyfr00d Posted February 5, 2003 Report Share Posted February 5, 2003 Where's the T coming from?? That shouldn't be in there. The number dialed should just be the *99# Link to comment Share on other sites More sharing options...
Guest Lojt Posted February 5, 2003 Report Share Posted February 5, 2003 I have no idea... :roll: btw, if i remove the country code and area code fields, the next time i go to the settings, they are back... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now