Guest kingmar Posted February 14, 2004 Report Share Posted February 14, 2004 Hey, I had my SPV unlocked for software and it worked fine. Then I runned the newest update and the SPV was application-locked again... I've tried to unlock it for many times, but with no result...... How can I unlock my SPV for applications with the newest update ?!? please help me...... (the update I'm talking about is the one which included "Task Manager") Link to comment Share on other sites More sharing options...
Guest Disco Stu Posted February 14, 2004 Report Share Posted February 14, 2004 There shouldn't be a problem. I've unlocked successfully twice with the OTA method after the 1.6 upgrade. Posted from my SmartPhone! Link to comment Share on other sites More sharing options...
Guest kingmar Posted February 14, 2004 Report Share Posted February 14, 2004 I've tried it again, but it doesn't work :) I've got rom version 1.6.3.11 does anyone know how to solve this problem? Link to comment Share on other sites More sharing options...
Guest awarner [MVP] Posted February 14, 2004 Report Share Posted February 14, 2004 When you say no result what is actually happening? If you are using a non Orange SIM or are outside the UK then you may need to decert using the passthrough connection instead of GPRS. Link to comment Share on other sites More sharing options...
Guest kingmar Posted February 14, 2004 Report Share Posted February 14, 2004 I have a orange SIM, and I live in the Netherlands (so it's outsite the UK :wink: ) With no result I mean it doesn't get unlocked Before I had runned the update I unlockt it (for applications) trough the Developers site (OTA way) and it worked fine... but with the update it doesn't work anymore :) Link to comment Share on other sites More sharing options...
Guest calvinlam Posted February 17, 2004 Report Share Posted February 17, 2004 When you say no result what is actually happening? If you are using a non Orange SIM or are outside the UK then you may need to decert using the passthrough connection instead of GPRS. Hello, can you be so kind to teach me how to decert plse. I've a Qtek 7070, and upgraded to the UK Orange 1.6 ROM. It works, but then I cannot install the Chinese interface that came with my local vendor, said model name is no correct when it configures the phone after installation. So no go. Would decert do the trick plse ? I then try putting the Qtek 1.50 ROM on it, but cannot, it keeps checking the device until Autosyn times out. Autosyn cannot recognise phone (icon turns grey from green) and said phone is not connnected although the USB connection is fine and available. Can any experts plse assist. Many thanks. Link to comment Share on other sites More sharing options...
Guest awarner [MVP] Posted February 17, 2004 Report Share Posted February 17, 2004 Try to decert using this method (first post in topic) it's written for users outside the UK and not on Orange. http://smartphone.modaco.com/viewtopic.php?t=25600 Link to comment Share on other sites More sharing options...
Guest calvinlam Posted February 18, 2004 Report Share Posted February 18, 2004 Try to decert using this method (first post in topic) it's written for users outside the UK and not on Orange.http://smartphone.MoDaCo.com/viewtopic.php?t=25600 By passthrough decerting, do you mean using the No Warez.exe and autosyn to the phone, then running Disable security on the phone? I did that and it let me install the program (previously it did not). But the problem is that after installation, the program seems to go and check the model name and said it is not correct, and abort. So still I have no Chinese interface. Would appreciate if you can shed some light here. Do I need to downgrade, and if so, How? The bootloader now shown after the 1.61 upgrade is 1.10 at Canary. And I could not put the Qtek 1.50 ROM on now, screen went blank/white and hung. Many thanks Link to comment Share on other sites More sharing options...
Guest calvinlam Posted February 18, 2004 Report Share Posted February 18, 2004 Try to decert using this method (first post in topic) it's written for users outside the UK and not on Orange.http://smartphone.MoDaCo.com/viewtopic.php?t=25600 Hi, I think what's preventing it to continue to configure the phone to have the new Chinese interface is probably a check in the xml file and tmp file which are included in the autoconfig directory of the MMC card. There are lines with parm or no parm = 0404. Is this the line I should change to something else to make it non-model specific. Plse assist, thanks. Link to comment Share on other sites More sharing options...
Guest calvinlam Posted February 18, 2004 Report Share Posted February 18, 2004 Hi, I think what's preventing it to continue to configure the phone to have the new Chinese interface is probably a check in the xml file and tmp file which are included in the autoconfig directory of the MMC card. There are lines with parm or no parm = 0404. Is this the line I should change to something else to make it non-model specific. Plse assist, thanks. Probed into it further, I found in the xml files, it marked the model to be "TAO MAGPIE". And even when the IA Manager was installed on the phone, when run, it said it works only on TAO MAGPIE phone ! I suspect that this is the conflict which prevent the installation of the Chinese interface as it checks the device to tally with the .exe files (for TAO MAGPIE). Please assist, how can I circumvent this. Or if I can't, do I then have no option but to downgrade ROM to Qtek 1.50 (and if so would it work??). As my bootloader after Orange 1.6 is now ver. 1.10, plse explain how can I downgrade (I tried many times without success). Would hard reset is the answer?? (some one said that it won't erase the orange defaults anyway, so would not help??). If so, how to go about it? Many thanks in advance to you all. Link to comment Share on other sites More sharing options...
Guest calvinlam Posted February 19, 2004 Report Share Posted February 19, 2004 Try to decert using this method (first post in topic) it's written for users outside the UK and not on Orange.http://smartphone.MoDaCo.com/viewtopic.php?t=25600 Hello My current status- Qtek 7070, Orange 1.6.1 ROM, decerted (successfully confirmed - by No Warez.exe as well as OTA via Orange devzone). Bootloader ver 1.10 at Canary 3 color screen Current problem- no MMS, can install the local dealer's Chinese interface software, but cannot be configured ("Model Name of Device is not Correct !). What should I do please ? -shall I downgrade to Qtek 1.50 or your iMate 1.50 ? - how do I do it with the newer bootloader 1.10, I tried and it hangs on a white screen while the ROM .exe checks the phone. What do I need to do in order to be able to run the downgrade software please ? Many thanks indeed. Link to comment Share on other sites More sharing options...
Guest rick Posted March 7, 2004 Report Share Posted March 7, 2004 hi, i am trying to install applications to my spv but no matter what i try this message appears "installation failed. the program cannot be installed because it does not have the adequate system permissions. Please contact your service provide for more information" cud anyone help me out with this one cheers rick Link to comment Share on other sites More sharing options...
Guest Disco Stu Posted March 8, 2004 Report Share Posted March 8, 2004 You need to application unlock the phone - click on --> OTA :) Link to comment Share on other sites More sharing options...
Guest xenolith Posted March 8, 2004 Report Share Posted March 8, 2004 I've followed the instructions for the OTA and i get nothing. I've tried it three times now, all i get is the 'it may take upto 5 mins' and nothig arrives. I have just updated to the new rom this morning. I have a Classic SPV, with orange SIM. Is there another way to app unlock other than the OTA? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now