Jump to content

mpx200 faults, freezing and messed up outer-LCD


Guest stu_lowe2003

Recommended Posts

Guest stu_lowe2003

Hi all

I haven't posted here in quite a while and unfortunately it's with a gripe I am having with my mpx200 (and Orange).

My mpx200 has started to crash to a black screen with a garbled display on the outer-lcd. When trying to switch it on it will sometimes get as far as the orange logo and then lock. Removal of the battery does not help. When left for about an hour it will magically start working again. The fault was not too inconvenient until it started doing it on a daily basis as it is now.

Enter Orange, the customer service gurus?!?, who have argued with me for a good few hours today about it. They have sent the fault to their technical department who couldn't work out what was wrong with it. Then when I asked for a replacement they have decided that my phone freezing for an hour at any random point in the day is not enough to be classed as a fault. It needs to lock for 7 or 8 hours of the day to be a fault. So their final line on it is that a fault is not a fault unless they say it is too inconvenient. The customer service coach gave me an example. If half the screen died, but you could still see enough to make calls then that is not faulty.

They also advised me that as a smartphone it has an in built feature to prevent damage to the phone, and this is what is happening. :P

So I have an ask of the good people here. If you have had a phone replaced by Orange as faulty (any phone, not just mpx200s) for anything that wasn't as bad as it being dead for 7 hours a day then can you reply to this thread. I would like to see if Orange are true to their word in not replacing handsets that are not completely dead. I know from my experience they have as I had an spv replaced for dust.

I have the file open with my local trading standards who found it incredible that they would say this to me. So any other ammo anyone can offer would be nice.

Thanks for any help on this

Stu

Link to comment
Share on other sites

  • 3 months later...
Guest mylifesaver

The same thing started happening to me yesterday. ALL of a sudden the outer lcd is garbled with lines and the display is dark with slight tints showing. I can't see anything unless it is pitch dark in the room and I hold it at an angle. Even like this it is messed up. Haven't dropped the thing or anything. ANYONE OUT THERE know of a solution??? THANK YOU IN ADVANCE> running 2003 on it. it is on tmobile network.

Link to comment
Share on other sites

Guest hotphil

Might be worth another call to OCS and speaking to someone else. Alternatively, 5-10 seconds in a microwave usually renders LCD's completely useless and you then wouldn't be able to use it to make calls. Not that I'd suggest you try it at all.

Link to comment
Share on other sites

Might be worth another call to OCS and speaking to someone else. Alternatively, 5-10 seconds in a microwave usually renders LCD's completely useless and you then wouldn't be able to use it to make calls. Not that I'd suggest you try it at all.

putting the phone in the microwave oven is not a right thing to do, for you to just avail of a replacement. all you have to do was to justify that the phone has faulty hardware and almost unusable, then that should be enough for you to get a replacement. ^_^

Link to comment
Share on other sites

  • 2 weeks later...

if it's out of warranty you might try to fix it, but if it's still under warranty, i would suggest you to just bring your phone to an authorized service center. trying to dismantle the phone voids your warranty.

Link to comment
Share on other sites

Guest lorismarcos

There is cable connecting to the marked place in the picture .I disconnected and connected the cable on my mpx200 and everything was working just fine

Link to comment
Share on other sites

Guest Belgarath Krall

well...i can't say that the phone was freezing on me but i did suffer the almost black screens and messed up external lcd...sent it back to motorola - i can post their service number here when i get back tonight if u like...then again they have had it for a while now - supposedly "waiting for parts" :roll:

Link to comment
Share on other sites

  • 2 weeks later...

Very slightly off topic but in the same basic vein - I keep getting a 'Sim Missing or Invalid' error on my phone. My first phone worked perfectly right up the day it was nicked out of my car. The replacement worked fine for about 24 hours and then the above errors started appearing up to 8 or 9 times a day. Orange replaced have repalced the phone twice and the sim once but I'm still getting the error message. Anyone got any ideas.

BTW I've tried cleaning the contacts both on the sim and the phone but to no effect.

Link to comment
Share on other sites

Very slightly off topic but in the same basic vein - I keep getting a 'Sim Missing or Invalid' error on my phone. My first phone worked perfectly right up the day it was nicked out of my car. The replacement worked fine for about 24 hours and then the above errors started appearing up to 8 or 9 times a day. Orange replaced have repalced the phone twice and the sim once but I'm still getting the error message. Anyone got any ideas.

BTW I've tried cleaning the contacts both on the sim and the phone but to no effect.

put a folded piece of paper between the battery and the sim. this should fix your problem. :wink:

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.