Jump to content


Using SPV as a IR modem for a Pocket PC

- - - - -

  • Please log in to reply
7 replies to this topic

#1
sch

sch

    Newbie

  • Members
  • Pip
  • 43 posts
Anyone tried setting up the SPV as a modem for another Pocket PC (in my case a Jornada 545) using IR?

I know I can use the IR port from my laptop so I'm happy that the phone IR port is working, but I can't get a connection from the Pocket PC even through I've set up an IRDA modem.

Thanks


#2
tiita

tiita

    Regular

  • Members
  • PipPip
  • 54 posts
so far only over gprs and using

+cgdcont=1,"IP","orangeinternet","",0,0


#3
sch

sch

    Newbie

  • Members
  • Pip
  • 43 posts

"tiita" said:

so far only over gprs and using

+cgdcont=1,"IP","orangeinternet","",0,0

Tried that - I'm dialling *99# or *99***1# as per some of the documents I've seen around the web but no joy. There is a connection to the phone over IR since I can get it to call me by changing the number to my number but I can't get GPRS access  :cry:


#4
tiita

tiita

    Regular

  • Members
  • PipPip
  • 54 posts
Tap on Start
Tap on settings
Tap on the connection icon
Tap on Dialing location tab
Tap on  Dialing Patterns and make sure it has only the letter G in every field
Press Ok
Tap on the connection tab
Under the top drop down Menu Tap Modify
Tap on new
Give a name to the connection : i.e.
ORANGE  GPRS

On the modem drop down menu select Generic IRDA

your network requires DNS, but they are not necessary.
Anyhow
Tap Advanced and then the Name Servers tab
Select “Use specific server address” (this will activate the grid)
Enter according to your network provider the correct settings:
Orange DNS 195.035.131.194
Alt DNS 195.035.131.195
Press next
Fill ONLY the telephone number field with *99#
Press Next
Untick the “Wait for dial tone” checkbox
On the extra init string enter
+cgdcont=1,"IP","orangeinternet","",0,0
Press Finish
Press Ok

Activate IRDA modem on the phone and align it with your PDA
press connect on the ipaq

if you want enter
username: orange
password: multimedia
put a tick to save the password

cross your fingers
press ok/connect


#5
sch

sch

    Newbie

  • Members
  • Pip
  • 43 posts

"tiita" said:

Tap on Start
Tap on settings
Tap on the connection icon
Tap on Dialing location tab

...

cross your fingers
press ok/connect

Thanks very much - I've finally managed to make a connection :D
It seems to have a tendency to drop out after a few minutes but
that might be just down to the fact I seem to be getting a low signal
at the minute.

The only thing I hadn't done was add the DNS settings - seems to handle this fine on my laptop, but obviously the jornada has a problem or two in this area.

Thanks again


#6
tiita

tiita

    Regular

  • Members
  • PipPip
  • 54 posts
glad it helped.

make sure your irda speed on the ipaq is 56700 which seems to be working sligthly better.

dns are not always necessary anyway


#7
Pete

Pete

    One step further...

  • Members
  • PipPipPip
  • 274 posts
  • Location:Midlands, UK
  • Devices:HP iPaq HW 6915
Hi,

Been having problems, and it looked like a lack of init strings was the problem, so I tried it one last time, before adding them, and guess what? it worked fine.

This leaves me wondering, therefore, what init strings are for, what they do, and what problems I could run into by not having them??

Thanks.

Pete
Wireless - Why Wait

#8
tiita

tiita

    Regular

  • Members
  • PipPip
  • 54 posts
that particular init string tells the modem to look for the access point on orangeinternet, and to automatically search for the IP address and connection speed.

the access point is important because that's where all the data you download when connected to the internet comes from.
withouth it, you shouldn't be able to maintain the connection open or you shouldn't be able to download anything.

on same handset it is possible to enter the apn on the phone.
unfortunately, afawk, when you enter that string on the phone it doesn't seem to like that much.
we got it to work that way as well but it never worked reliably or maybe we just failed to understand what's the key setting that makes it work





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users