I had the same problem with the Samsung Omnia. The only way to solve the problem was to install
That creates a virtual Com port that works with TomTom.
Instruction that i have got from another post:
1.Samsung Omnia Configuration:
1.2- Go to your samsung omnia MainMenu and then click on configuration icon.
1.3-Click on System tab on Configuration page(it is located at the bottom of page).
1.4-Click on the External GPS icon.
1.5-Click the programma's tab(if not chosen already).
1.6-Choose COM4 from GPS-Programmaport ( from drop down menu).
1.7-Click on Hardware tab(at the bottom of page).
1.8-Set the GPS-Hardwareport to COM9 ( if not already set to COM9).
1.9-Set the Baudrate to 4800 ( if not already set to 4800).
1.10-Go to the next tab and choose the GPS automatically administer ( if not already chosen).
1.11-Click on the OK button on the top of your configuration page.
2-GpsGate 2.6 installation:
2.1-Download and install GpsGate 2.6 in your samsung omnia mobile
from here (http://franson.com/g...;platform=winxp
2.2-Go to your programs on your samsung omnia and click on the
GpsGate 2.6 . You will be presented with configurations page(if a popup
menu opens click on settings).
2.3-Click on the wizard button on the bottom right side of your gps configuration page.
2.4-Choose only Wired or built in GPS fromt he Search Options list.
2.5- Click on > button(sign). Now your samsung omnia will search
for a valid gps port. and will present you with a pop up menu telling
that it finds a COM4 ... do you want to use it. Click on OK
button.You will be presented with Select OUT PUT page.
2.6-Choose Share with NMEA applications from OUT PUT list.( if not already selected).
2.7-Click the > button (sign). You will be presented with pop up info page.
2.8-Click on ok button on the popup info page.
2.9-Now click on the Finish button on Summary page.
Now your GpsGate 2.6 program is configured to receive Gps signals.
2.11-Click on OK button to exit GpsGate 2.6 configuration page.
3.1-Open your TomTom6 mobile navigation program.
3.2-Tap on the page to go to Main Menu of TomTom6.
3.3-Click on Chanage preferences.
3.4-Click on Show GPS status iocn.
3.5-Click on Configure button.
3.6-Choose "Other NMEA GPS receiver" from the list.
3.7-Click on Select button.
3.8-Set the "GPS baud rate" to 4800.
3.9-Click on "Done" button.
3.10-Choose the "Franson COM1" from the GPS is connected to: list . You will be back to GPS status page.
3.11-Click on Done button.
Hope that this solve your problem.
Hello Guys from germany.
Since few days I have the new Eten dx900.
A short review from my side before i ask for my problem.
Its great, all feature works fine..a long list of topics with positiv items...really great.
Three things i donot like.
1) very small screen QWERTZ touch field...impossible for me to use only without pen
2)Kamera is very slow...and very often the cam hang up for 10-20 sek.
3) The Operating System WM 6.1 hang up like a pc Windows....sometimes it takes a while ....the screen is frozen....I think the issue is linked to the "mobile system"
Every time when the mobile done a update of the Provider signal ...the operating system make a short "break"
Feel free to ask me , when you have a question.
Ok.Let tell me my Problem.
TomTom v7 dont find the internal gps signal.
I try in the TomTom software the option built in gps and other nimea gps reciever.
Buad and com i try very much..from 9600-57600
WM6.1 under external Gps i variat the com also , but i take the same values on the tomtom software.
At the moment the setting are:
other Imea Baud 38400 @gps c0m 3
Gps setting :
Hardware com5 38400
Everytime when i start tomtom and try to configure the gps status the status goes from No gps hardware to Very weak signal do your are inseide a building?
On this point also the small Led for GPS is on.
I also try a tip ,that you should switch WIFI or Blutooth on , because the mobile device could think that we are in plane and the gps will switch off.
But it doesn't work
Gps viewer works well
Have somebody a solution for me
Please help me.
Thanks in advance