25 replies to this topic

[barbarony62]

Hi,

does anybody know if Igo primo (8.5.9) works with Omnia. i.e. do I need a proper data.zip and sys.txt files?

and if so, where could I get them?

regards

[barbarony62]

barbarony62, on May 29 2010, 15:04, said:

Hi,

does anybody know if Igo primo (8.5.9) works with Omnia. i.e. do I need a proper data.zip and sys.txt files?

and if so, where could I get them?

regards

Problem solved - issue closed

[sabayanko]

barbarony62, on May 30 2010, 10:36, said:

Problem solved - issue closed

HOW?

[barbarony62]

sabayanko, on May 30 2010, 14:19, said:

HOW?

somebody gave me proper instructions to the specific problem I had... I am guessing that if he decided to to it via PM he had his reasons.

if anybody asks me something specific, and I know the answer, I will gladly help.

regards

[Davezil]

barbarony62, on May 30 2010, 12:09, said:

somebody gave me proper instructions to the specific problem I had... I am guessing that if he decided to to it via PM he had his reasons.

if anybody asks me something specific, and I know the answer, I will gladly help.

regards

Would you be so kind to give those info to me as well please ?
I've searched everywhere but nothing works .

Thanks in advance

[Crazy Dutch]

I am having issues myself aswell.

Primo starts up alright, but it does so in 800x480 mode.. I only get to see 1/4 of the screen with my poor old Omnia!

Someone's got an idea? I've been digging thru all files now.. still can't find out why it's reverting to 800x480 even tho the sys.cfg says 400x240..

EDIT:

When i rename the system file, and i let Primo start without it, it says " ERROR: User interface resolution [240x400] is not supported or compatible skin can not be found. Exiting application. "

Edited by Crazy Dutch, 07 June 2010 - 02:14 PM.

[caja]

you have to find data.zip wich supports the 400×240 resolution and put that into sys.txt

[Interface]
resolution_dir="400_240"
screen_x=400
screen_y=240

[Rawdisplay]
HighRes=0
screen_x=400
screen_y=240
class="landscape"


and before you launch primo,turn the screen to landscape and it should work

[mohamedfois]

Hi everyone,

I am a starter, just trying to use Primo on my Omnia i900. Doenloaded and installed the app, all working fine but i can't get a connection to any Satellites. It keeps telling Autodetecting GPS reciever but nothing happens. Here is a copy my sys.txt file

[device]
type="samsung_i900"

[Interface]
resolution_dir="400_240"
screen_x=400
screen_y=240

[Rawdisplay]
HighRes=0
screen_x=400
screen_y=240
class="landscape"

[gps]
port=4
baud=57600

[warning]
speedcam_warning="1"

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400


I would appreciate if any one can help with the external GPS settings in my mob too. I am in melbourne and I don't have data plan. Thanks a lot guys..(sorry  if this qus is not relevant to topic   )

[Pusheka]

Here for all to IGO Primo and Omnia i900!!!
Data.zip and Sys.txt:
Put the folder and start IGO.
Phone in landscape mode before you start.
Data.zip
Sys.txt

[xavierf]

My files : SYS.txt / data.zip

IGO Primo works on I900  

[cosminnn]

Hi,

My iGO Primo won´t get a lock. I am using the above files (sys and data), the display is fine, but it won´t get a lock. It is looking for my GPS receiver and after a while tells me: "Your GPS receiver has been turned off".

My Omnia settings are:

Gps Program port: com3
Gps harware port: com9
Baud rate:4800

I am using OCK´s roms, with all the GPS fixes built in. With the above setting I have no problem to get a lock with iGO 8.3 or google maps.

I tried different settings in the sys.txt file for the [gps] section but unsuccesfull so far. Please help me, Thanks

[xavierf]

In the SYS.txt, you have to change the port and the baud rate.
My configuration :

Quote

[gps]
port="2"
baud=9600
source="nmea"
set_messages=0

[cosminnn]

xavierf, on Jul 20 2010, 14:02, said:

In the SYS.txt, you have to change the port and the baud rate.
My configuration :

I did that with my own data with no luck. Nevertheless I found a more unorthodox solution to this: I started Google maps and waited to get a lock, then with Google maps running I went to HOME (showcase buton) and started iGO Primo as well. It got an instant lock Now working and locking on it´s own, without Google maps help. Maybe it was the cold start ...

[urphonesux]

are you guys using tts?
and do either of you experience slowdowns when navigating through the menus?

[spjaimito]

I find it impossible to make it work. I downloaded SYS.TXT an DATA file by "Pusheka and xavierf", but I always get the error: "Fatal error occurred in main thread.
Address. 0x0055c868 - Exception: 0xc0000005 ".

I'm desperate. Not that I can do.

Edited by spjaimito, 08 November 2010 - 09:13 PM.

[Dado...]

......

upps, my mistake....

Edited by Dado..., 08 November 2010 - 11:20 PM.

[barbarony62]

spjaimito, on Nov 8 2010, 23:13, said:

I find it impossible to make it work. I downloaded SYS.TXT an DATA file by "Pusheka and xavierf", but I always get the error: "Fatal error occurred in main thread.
Address. 0x0055c868 - Exception: 0xc0000005 ".

I'm desperate. Not that I can do.

go to http://www.modaco.co...mo-omnia-i-900/

follow the link in it to an Italian site.... use google translate to understand Italian site

got it all working in 5 minutes

[szaga]

barbarony62, on May 29 2010, 13:04, said:

Hi,

does anybody know if Igo primo (8.5.9) works with Omnia. i.e. do I need a proper data.zip and sys.txt files?

and if so, where could I get them?

regards

Here is my data.zip sys.txt with the data. Sys.txt of the tts file to search in English or your own language  because on my Hungarian setting. The rest of the file remain sys.txt! Oh, and this is the data.zip sys.txt Igo Primo 1.1 files to green routing is optimized for Samsung i900 Omnia!

 Igo_Primo_1.1.jpg   58.92K   330 downloads

sys.txt:    SYS.txt   8.44K   945 downloads

data.zip_400x240 :  data

Working 100% !!!

Good luck with your driving!  

[gheorghe vasile]

The first Igo primo functional on my omnia. THANKS

szaga, on Nov 9 2010, 11:44, said:

Here is my data.zip sys.txt with the data. Sys.txt of the tts file to search in English or your own language  because on my Hungarian setting. The rest of the file remain sys.txt! Oh, and this is the data.zip sys.txt Igo Primo 1.1 files to green routing is optimized for Samsung i900 Omnia!

Igo_Primo_1.1.jpg

sys.txt:   SYS.txt

data.zip_400x240 :  data

Working 100% !!!

Good luck with your driving!  

[Abdu_el]

hello

I want to know who to have the TMC on with primo because I have OmniaTMC beta 2 who were working very good with igo 8.3

but now I can't find any screen on primo that speak about TMC just a case to accept in option (setting / circulation / traffic receptor )


can anyone give me helps

tanks