143 replies to this topic

[BooToo]

CSSL1212, on Aug 25 2010, 17:05, said:

Found the solution from xda!
http://forum.xda-dev...ad.php?t=752769
it fact, the error is caused by win7, i follow lufc's instruction and it works! and I got 2.1!  

Hello CSSL1212,

  
I have exactly this problem and the thread 752769 is no longer available...

Could you please give a description of how to solve this Streak driver detection/install problem on Win7/64 as each time I connect it, I get the "do do do" from death...
It seems that it search and cannot fnd the android 1.0 driver..
Hepl        

Edited by BooToo, 03 September 2010 - 10:35 PM.

[BooToo]

Well...
I managed to get my 2.1 update 1 installed on my O2 Streak via the official DELL Wifi download page.

I am VERY surprised by some people comments relative to how slow the 2.1 is coming from 1.6.
Personnaly, I find it MUCH faster...

One thing though... My SD card no longer appear under windows. I explored the settings menue unsucessfully.
Anybody got the same problem and found how to solve it by any chance?
Cheer,
BooToo

[CSSL1212]

BooToo, on Sep 4 2010, 07:10, said:

Well...
I managed to get my 2.1 update 1 installed on my O2 Streak via the official DELL Wifi download page.

I am VERY surprised by some people comments relative to how slow the 2.1 is coming from 1.6.
Personnaly, I find it MUCH faster...

One thing though... My SD card no longer appear under windows. I explored the settings menue unsucessfully.
Anybody got the same problem and found how to solve it by any chance?
Cheer,
BooToo

I just read your post, congratulations! I trust you found the way to sort out the problem, how can you do that?

One of the solution below in case someone get this problem

-device is not recognized by PC (win7) during Fastboot mode
-go to device manager > right click unknown device > properties > update driver > browse driver in computer > let me choose from computer's drive > choose Android Phone then it should be sorted!

[fards]

BooToo, on Sep 4 2010, 00:10, said:

Well...
I managed to get my 2.1 update 1 installed on my O2 Streak via the official DELL Wifi download page.

I am VERY surprised by some people comments relative to how slow the 2.1 is coming from 1.6.
Personnaly, I find it MUCH faster...

One thing though... My SD card no longer appear under windows. I explored the settings menue unsucessfully.
Anybody got the same problem and found how to solve it by any chance?
Cheer,
BooToo

Press the notification area at the top and pressed mount?
Maybe you have a duff USB cable..

[devilsiaosiao]

hi paul im using your guide to update my baseband 00 to 21 to use this 2.1 update. may i ask if im just a normal user. can i do without the SUPERBOOT and recovery images step after i updated to 2.1 using the first 2 step? please help

[vinokirk]

fards, on Sep 3 2010, 22:57, said:

kernel/baseband mismatch I think..

you need the same baseband as the boot.img

Mine is an O2 version and i presume the MCR is an O2 version. So the baseband+boot.img must match id say??

[Techneut]

CSSL1212, on Sep 4 2010, 02:35, said:

One of the solution below in case someone get this problem

-device is not recognized by PC (win7) during Fastboot mode
-go to device manager > right click unknown device > properties > update driver > browse driver in computer > let me choose from computer's drive > choose Android Phone then it should be sorted!

This did the trick for me on Windows XP! Thank you VERY much!!!

[vinokirk]

Finally the lock screen is back the 1.6 fastness!
There was a big of lag with the previous 2.1 versions, very annoying, especially when your screen timout is something like 30 secs!
But its definately back to the 1.6 speed now :-)

[mzsigler]

Does anyone have 8105 in zip form so it can be flashed from an aftermarket recovery? Stock recovery isn't working for me, and the modaco rom just hangs at boot screen.

[BooToo]

CSSL1212, on Sep 4 2010, 00:35, said:

I just read your post, congratulations! I trust you found the way to sort out the problem, how can you do that?

One of the solution below in case someone get this problem

-device is not recognized by PC (win7) during Fastboot mode
-go to device manager > right click unknown device > properties > update driver > browse driver in computer > let me choose from computer's drive > choose Android Phone then it should be sorted!

I went through wifi for the update so did not need to get the streak identified in recovery mode ;-)

Anyway, I followed your instructions by selecting the android driver manually and the Streak is now fully recognized so BIG THANKS ;-) (By the way, for the one who have this probel, be aware this needs to be done in both normal and recovery mode)

For the USB mount problem, I also found the solution.
It needs to be done manually by clicking the top menu bar on the right of the SIM one (the one where it shows the USB symbol) + click the USB connection and you will be proposed with an option to mount your card.

I guess, this is a difference with Froyo who automatically mount it on my Nexus.

Next stop for me is the 2.2 upgrade (I really miss flash on the sites) as soon as it is available + SIM FREE when the codes start to be distributed and I will have my Adroid dream terminal ;-))))

Edited by BooToo, 04 September 2010 - 10:05 AM.

[timbomfg]

Flashed, rebooted, now just getting the Dell Logo and the MCR logo flashing.

[d3v]

New to this and I just followed this procedure and am stuck in the Dell Logo....and all three buttons are lit up

I had a direct purchased Dell Streak - and got applied 6267 yesterday and since then was having issues - so I thought I would follow this and see where it got to

My device was not rooted and I followed the instruction in first screen
fast boot and applied update.pkg
now stuck in dell logo for 30 minutes r so - should I continue to wait ????

please help

[CSSL1212]

d3v, on Sep 4 2010, 20:46, said:

New to this and I just followed this procedure and am stuck in the Dell Logo....and all three buttons are lit up

I had a direct purchased Dell Streak - and got applied 6267 yesterday and since then was having issues - so I thought I would follow this and see where it got to

My device was not rooted and I followed the instruction in first screen
fast boot and applied update.pkg
now stuck in dell logo for 30 minutes r so - should I continue to wait ????

please help

I had such problem yesterday when i flashed the 8105, finally i went thru it after took out the battery. However, the 3 leds are blinking 3 times every few minutes... very annoying... i will try reflashing tonight.

Edited by CSSL1212, 04 September 2010 - 01:35 PM.

[CSSL1212]

CSSL1212, on Sep 4 2010, 21:34, said:

I had such problem yesterday when i flashed the 8105, finally i went thru it after took out the battery. However, the 3 leds are blinking 3 times every few minutes... very annoying... i will try reflashing tonight.

The phone seems working very good so far followed with Paul's procedure: copy the 8105 update.pkg to SD card then reflashing > done! The LEDs do not blink anymore, I am so happy.  

Thanks Paul.  

Edited by CSSL1212, 04 September 2010 - 05:40 PM.

[vinokirk]

CSSL1212, on Sep 4 2010, 18:39, said:

The phone seems working very good so far followed with Paul's procedure: copy the 8105 update.pkg to SD card then reflashing > done! The LEDs do not blink anymore, I am so happy.  

Thanks Paul.  

Re flashed 2.1 mcr but still got flashing leds!grrrr

[BooToo]

jannism, on Aug 31 2010, 13:03, said:

adb-windows shell (or adb-linux shell or adb-mac shell)
su
mount -o remount,rw /dev/block/mtdblock6 /system && rm /system/etc/install-recovery.sh && mount -o remount,ro /dev/block/mtdblock6 /system
exit
exit

I tried the above but I just get "device not found" error following the first bit which means it doesn't understand the mount command. I guess I'm missing something somthing fundamental (a clue!) but I'm in over my head already. Have I missed something simple?

I'm currently on a rooted 7546 build.

Hehehe...
I am now sucessfully on 2.1 official on my O2. So far so good  

Now, I am trying to install the custom recovery image and am also running through the same issue as above.
My drivers did not get installed automatically under windows and I had to select Android 1.0 manually and it seems that everything got install correctly ( I can connect to the phone using ADB shell when booted or in recovery mode connected to my W7 pc).

However, when I follow the instructions above and try to connect to the phone via the "adb-windows" from the recovery image folder directly (instead of sdk/tools), I get a "Device not found".
How weird is that??????

I have tried the procedure from my sdk/tools folder and all command seemed to work, then I double clicked the "install-recovery-windows.bat" who also seemed sucessfull.

Unfortunately, when I boot pressing the volume buttons, I get the Dell/O2   logos and get back to my 2.1 home screen  

Not sure what i am doing wrong here so any input is welcome  
Thanks in advance.
BooToo

Edited by BooToo, 04 September 2010 - 11:14 PM.

[BooToo]

I managed to solve the problem of Device not found by making a copy of ADB for SDK/Tools in the recovery folder (Low tech but it works...)

But now.. Well, have a look to the erro message I get and hopefully, you won't have to tell me I am not a morron who doesn't know how copy a command line  


mount -o remount,rw /dev/block/mtdblock6 /system && rm /system/etc/install-recovery.sh && mount -o remount,ro /dev/block/mtdblock6 /system rm failed for /system/etc/install-recovery.sh, No such file or directory

Input more than welcome!!!
BooToo

Edited by BooToo, 04 September 2010 - 11:36 PM.

[peekofai]

If you are using koush's recovery, you need to go into partitions to mount system. This may be easier

[BooToo]

peekofai, on Sep 5 2010, 07:10, said:

If you are using koush's recovery, you need to go into partitions to mount system. This may be easier

Hi,
Not sure I understand, could you please ellaborate?
The only Streak partition I see in windows is the SD card. I do not see the system partition...
Thanks,
BooToo

Edited by BooToo, 05 September 2010 - 10:44 AM.

[andystarks]

Hi,

Newbie here.

I have a Dell direct Streak, 00-EU baseband. I updated with the Dell update on Friday and now have the flashing Menu and Home buttons. My screen is hyper sensitive (making texting impossible).

I have tried to follow the instructions at the top of this topic but my PC (Win7 and XP) cannot find drivers to run the Streak in the Fastboot mode so therefore wont allow me to access the device.

Someone please help me. This unit cost me over £450 and I am totally pee'd off now.

Looking forward to some idiot proof responses, I am not that technically minded and have never had to do this sort of stuff before.

Cheers folks

Andy