201 replies to this topic

[gusthy]

kallt_kaffe, on Nov 26 2010, 12:53, said:

Could someone please the attached kernel on hungarian blade. It will swap Red and Blue on my OSF so if it works on a hungarian (lcd) blade then I think I know how to make kernel that will work on both phones.

I installed it.
Colors are correct.

Edit:
Swap work well, too. Hungarian Blade became usable

Edited by gusthy, 26 November 2010 - 01:50 PM.

[kallt_kaffe]

gusthy, on Nov 26 2010, 14:48, said:

I installed it.
Colors are correct.

Edit:
Swap work well, too. Hungarian Blade became usable

Just one final test. This version should automaticly swap red and blue only on LCD devices so that it will work on both OLED and LCD blades.

Attached Files

•  Hungarian_Hedgehog_custom_kernel_test.zip   2.51MB   15 downloads

[gusthy]

kallt_kaffe, on Nov 26 2010, 13:57, said:

Just one final test. This version should automaticly swap red and blue only on LCD devices so that it will work on both OLED and LCD blades.

Works correctly too.
BTW since it is GPL, you should publish your kernel modifications

[kallt_kaffe]

gusthy, on Nov 26 2010, 15:01, said:

Works correctly too.
BTW since it is GPL, you should publish your kernel modifications

Hehe... you're absolutely right. I will...

Will start uploading RLS2. No more original kernel, custom one should work for everyone now. Also I think I may have managed to fix the wifi issue.

Edited by kallt_kaffe, 26 November 2010 - 02:06 PM.

[gusthy]

kallt_kaffe, on Nov 26 2010, 14:06, said:

Hehe... you're absolutely right. I will...

Will start uploading RLS2. No more original kernel, custom one should work for everyone now. Also I think I may have managed to fix the wifi issue.

Yiiip

[kallt_kaffe]

RLS2 in first post. Let me know if you find any issues with the custom kernel and I'll make an addon with the original one. Also I'd like feedback on if the wifi issue is gone now. It has worked perfectly for me today but I haven't had very much time to test it.

[paraselene]

I really like the overclocking
Even I updated to RLS1b, I use the overclock add-on in RLS1 too
However, seems there are more updates in kernel on RLS2.  Could you add it back as addons?

Edited by paraselene, 26 November 2010 - 03:12 PM.

[kallt_kaffe]

paraselene, on Nov 26 2010, 16:10, said:

I really like the overclocking, Could you add it back as addons?

I could but it slows 3D graphics (and perhaps also 2D) down. Propably due to some bus speed mismatch or something when not using one of the built in PLL clocks. What speed did you use?

[paraselene]

kallt_kaffe, on Nov 26 2010, 23:12, said:

I could but it slows 3D graphics (and perhaps also 2D) down. Propably due to some bus speed mismatch or something when not using one of the built in PLL clocks. What speed did you use?

It seems that when I overclock to 691200, My Angry Bird run smoother.
I prefer u offer all 5 overclock addons, I change the kernel from time to time if i think it's not stable. Thanks for your help.
It's really a Good ROM, I use your ROM since French Fries. One of the big reason is that you offer overclock addons

[PeTiNgA]

The portuguese version of SF (Optimus San Francisco - 189€) started selling today.

Can some one give me instructions on how to dump the ROM so I can ask someone to dump it? It may have some updated bits

Thanks in advance.

[asturel]

rls2 hw ui addon doesnt update build.prop (debug.sf.hw=0)
i just installed the rom, after boot i have only 20-25mb (w/ stock rom ~70) free ram :S and the phone is very sluggish :/ (maybe cause the vm heapsize?)
but the touchscreen driver is good

p.s.: i did not do a wipe

Edited by asturel, 26 November 2010 - 05:19 PM.

[paraselene]

PeTiNgA, on Nov 27 2010, 00:08, said:

The portuguese version of SF (Optimus San Francisco - 189€) started selling today.

Can some one give me instructions on how to dump the ROM so I can ask someone to dump it? It may have some updated bits

Thanks in advance.

Hope you find this useful
http://android.modac...p...t&p=1422321

[PeTiNgA]

paraselene, on Nov 26 2010, 17:18, said:

Hope you find this useful
http://android.modac...p...t&p=1422321

Thanks, just asked in a Portuguese forum to see if someone could make a ROM dump

I'll keep you posted  

[paraselene]

In fact, what's the use of Hardware accelerated UI. I only feel different in using Rockplayer to play video using hardware decode. Is there any more place it has certain effect?

[paraselene]

I found that the touch screen could not detect the pressure of touch right now, have you made any change on the kernel of touch screen?

[kallt_kaffe]

asturel, on Nov 26 2010, 17:29, said:

rls2 hw ui addon doesnt update build.prop (debug.sf.hw=0)

I've updated the addons package with a fixed hardware ui addon, thanks for pointing that out.

Quote

i just installed the rom, after boot i have only 20-25mb (w/ stock rom ~70) free ram :S and the phone is very sluggish :/ (maybe cause the vm heapsize?)
but the touchscreen driver is good

p.s.: i did not do a wipe

Try changing the vm heapsize back to 24m to see if it makes a difference.

[kallt_kaffe]

paraselene, on Nov 26 2010, 19:06, said:

I found that the touch screen could not detect the pressure of touch right now, have you made any change on the kernel of touch screen?

ZTE gave us a new touchscreen driver with the 23/11 kernel source. It may work a bit different compared to the old one?

[paraselene]

kallt_kaffe, on Nov 27 2010, 02:21, said:

ZTE gave us a new touchscreen driver with the 23/11 kernel source. It may work a bit different compared to the old one?

http://www.the8pen.com/
I use this ime, it has a feature that allow user to switch to upper case characters when user press harder.
in the setting, it allow user to set the pressure threshold. However, after updating to RLS2. I can't set it and it jump to max when i press the screen.

[cobhc]

kallt_kaffe, on Nov 26 2010, 15:12, said:

I could but it slows 3D graphics (and perhaps also 2D) down. Propably due to some bus speed mismatch or something when not using one of the built in PLL clocks. What speed did you use?

Fancy having a gander at this?

http://forum.xda-dev...ad.php?t=710850

Might shed some light on the overclocking problem.

[cobhc]

kallt_kaffe, on Nov 26 2010, 15:12, said:

I could but it slows 3D graphics (and perhaps also 2D) down. Propably due to some bus speed mismatch or something when not using one of the built in PLL clocks. What speed did you use?

Fancy having a gander at this?

http://forum.xda-dev...ad.php?t=710850

Might shed some light on the overclocking problem.