10 replies to this topic

[mcnob]

http://developer.son.../...cc=gb&lc=en

Found the link over at XDA but thought it deserved highlighting over here in its own thread.

[bluenazgul]

mcnob, on Nov 20 2010, 12:45, said:

http://developer.son.../...cc=gb&lc=en

Found the link over at XDA but thought it deserved highlighting over here in its own thread.

Here is a mirror:
http://dl.dropbox.co...ew_SDK_v1.0.zip

[mcnob]

What with this and Rovex's DFU revelation, hopefully someone should be able to come up with some sort of fix....hopefully.......

[rovex]

Interestingly since is discovered the DFU menu my liveview has been almost perfect. It connects when it should, updates ok and the battery has lasted all day without the icon going down at all! Yesterday by this point in the day it was completely flat and the connection was dropping every few minutes or it was freezing. I did remove LiveWare completely and reinstall the liveview app as well.

If it stays like that it will be fine, although i hope someone makes screen protectors soon, mine is already scratched..

[bluenazgul]

mcnob, on Nov 20 2010, 14:40, said:

What with this and Rovex's DFU revelation, hopefully someone should be able to come up with some sort of fix....hopefully.......

Found this on XDA:

DFU Mode:
Switcht the LiveView off and than switch it with both hardware buttons on.
To leave the DFU Mode just hold the power button for about 10sec.

It shows a USB-Plug on the display and the letters DFU - but it doesn't gets detected on my mac...it would be too easy

Source:
http://forum.xda-dev...mp;postcount=40

on my Windows Laptop it detects as hardware, but idk if there are any drivers for it

I think it should be possible to update the FW

[mrshark]

mcnob, on Nov 20 2010, 11:45, said:

http://developer.son.../...cc=gb&lc=en

Found the link over at XDA but thought it deserved highlighting over here in its own thread.

also a small pdf tutorial: http://developer.son.../...cc=gb&lc=en

[Nicke]

bluenazgul, on Nov 20 2010, 18:33, said:

Found this on XDA:

DFU Mode:
Switcht the LiveView off and than switch it with both hardware buttons on.
To leave the DFU Mode just hold the power button for about 10sec.

It shows a USB-Plug on the display and the letters DFU - but it doesn't gets detected on my mac...it would be too easy

Source:
http://forum.xda-dev...mp;postcount=40

on my Windows Laptop it detects as hardware, but idk if there are any drivers for it

I think it should be possible to update the FW

Hmm. I cant get into that mode. LV starts but wants to pair with a new device..?

Edit: ah, worked now when connected via usb..

Edited by Nicke, 20 November 2010 - 05:14 PM.

[mcnob]

Connecting to a PC shows it as "Sony MN800" but no drivers available.

A quick search for mn800 drivers yields nothing useful.

[dezmo]

mcnob, on Nov 20 2010, 19:42, said:

Connecting to a PC shows it as "Sony MN800" but no drivers available.

A quick search for mn800 drivers yields nothing useful.

I had SE P1i phone, I think the drivers left in computer... So when I'm connected LiveView in DFU mode it has been recognized and driver installed. Windows 7 told the device is ready to use... see picture attached.

Edit: There is other SE device under USB controllers.

Attached Files

•  dfu.jpg   50.6K   33 downloads
•  SE.jpg   52.35K   27 downloads

Edited by dezmo, 20 November 2010 - 06:38 PM.

[Nicke]

dezmo, on Nov 20 2010, 21:33, said:

I had SE P1i phone, I think the drivers left in computer... So when I'm connected LiveView in DFU mode it has been recognized and driver installed. Windows 7 told the device is ready to use... see picture attached.

Edit: There is other SE device under USB controllers.

You have (or had) Update Service installed.
The driver for LV will install if you have this installed first:
http://www.sonyerics...o...cc=gb&lc=en

No support for LV yet but i'm sure it will come.

[gadgetgaz]

mcnob, on Nov 20 2010, 11:45, said:

http://developer.son.../...cc=gb&lc=en

Found the link over at XDA but thought it deserved highlighting over here in its own thread.

Hi, can anyone help me with this. I have successfully compiled and built the helloworldplugin.apk from the SDK. I have installed the .apk file on my phone but it is not listed in the liveView app.

I am looking in LiveView/Manage LiveView/Customise Tiles/Manage plug-ins

I see the sporty pal plugin but my helloworldplugin is not there.

There were no errors when I installed the .apk - is that the correct way to install a liveView plugin? I don't see any instructions in the SDK documents.

The LiveWare app only seems to search the Android Market for plugins so I don't think you install one that way.