62 replies to this topic

[Sebastian404]

Hmm, that is interesting, it sounds like they have made some changes to the hardware for the AU market,,,

If you go into the advances menu theres a key test function, can you use that and let me know the values its reporting for all the physical keys on the device?

Have you dumped its rom?

[Racerboy]

ok heres the results of key test, my version 4.0.1.5 gen1 works great no probs and have never had keymapping problems at all, but i do update CWM whenever theirs an update....

green button 231

end call 107

vol+115

vol- 114

power button 142

Edited by Racerboy, 01 September 2011 - 07:25 PM.

[YoYo Kenny]

Sebastian404, on 01 September 2011 - 06:52 PM, said:

Hmm, that is interesting, it sounds like they have made some changes to the hardware for the AU market,,,

If you go into the advances menu theres a key test function, can you use that and let me know the values its reporting for all the physical keys on the device?

Have you dumped its rom?

It's not the physical keys that are the problem, it's the virtual keys. They just don't work in ClockworkMod Recovery.

EDIT: I'm using ClockworkMod v4.0.1.5

EDIT: Holding in the power key shows 116

Edited by YoYo Kenny, 02 September 2011 - 06:17 AM.

[Racerboy]

hi Sebastian404 did you want a rom dump for the rom i`ve got installed (4pda 2.3.5 #179) on 3uk Racer?

if so can you pm me a guide to use romdump on adb plz, i`ve tried the commands list you posted but no success
ADB is fully setup and working fine, adb devices : Racer

EDIT: I sorted it

Edited by Racerboy, 05 September 2011 - 02:29 PM.

[shiner69]

BobRoss23, on 30 August 2011 - 11:35 PM, said:

hey,
my device is the

telstra smart touch t3020 bought in australia

clockwork mod works fine BUT just to let everybody else know:
the key mapping is slightly different than stated in the mod
volume up and down works as expected but select doesnt work via the home key
to select use volume up and down until it suddenly says "back menu button enabled", that happens usually when you're at the first item in the menu and go one higher so it jumps to the last or vice versa (go to the last, one lower so it jumps to the first)
after you've done that, you can now select with the POWER BUTTON on the top of your phone!

havent found that information here so far, so if it helps somebody, you are welcome. if that bit of information is here already somewhere, i'm sorry but you are still welcome.

[Racerboy]

TO ALL Telstra T3020 USERS info needed so that Sebastian can maybe change the keymapping on CWM......

If you go into the advances menu theres a key test function, can you use that and post the values its reporting for all the physical keys on the device? thx

example:

green/call button 231

end call 107

vol+115

vol- 114

power button 142

[Vlatko25]

Racerboy, on 03 September 2011 - 08:57 AM, said:

TO ALL Telstra T3020 USERS info needed so that Sebastian can maybe change the keymapping on CWM......

If you go into the advances menu theres a key test function, can you use that and post the values its reporting for all the physical keys on the device? thx

example:

green/call button 231

end call 107

vol+115

vol- 114

power button 142

i also have problem with 4.0.1.5 recovery,doesnt work keys for me   why?

[Racerboy]

ok, post your original phone operator and do the test as mensioned above, post the results...then maybe sebastian can see and maybe change somethings......

a work around that has worked is to downgrade CWM to 4.0.1.4 then upgrade to 4.0.1.5.............i dont know if its a problem with 4.0.1.5 or not

HERE is gen1 4.0.1.4 update.zip file, to installed through CWM, reboot into recovery, check you have version 4.0.1.4 installed now, now install 4.0.1.5 HERE update .zip through CWM again, reboot into CWM again and check you have 4.0.1.5 installed and then check hardkey functions, hopefully thats fixed it for you..

Edited by Racerboy, 03 September 2011 - 01:49 PM.

[Vlatko25]

hey when i press back key enabled,it worked

[Racerboy]

Vlatko25, on 03 September 2011 - 03:08 PM, said:

hey when i press back key enabled,it worked

did what i said above work for you?


when you press the end call button, it changes the button config lol aswell.......    but rebooting CWM should reset the config back to normal.......

Edited by Racerboy, 03 September 2011 - 03:47 PM.

[shiner69]

BobRoss23, on 30 August 2011 - 11:35 PM, said:

hey,
my device is the

telstra smart touch t3020 bought in australia

clockwork mod works fine BUT just to let everybody else know:
the key mapping is slightly different than stated in the mod
volume up and down works as expected but select doesnt work via the home key
to select use volume up and down until it suddenly says "back menu button enabled", that happens usually when you're at the first item in the menu and go one higher so it jumps to the last or vice versa (go to the last, one lower so it jumps to the first)
after you've done that, you can now select with the POWER BUTTON on the top of your phone!

havent found that information here so far, so if it helps somebody, you are welcome. if that bit of information is here already somewhere, i'm sorry but you are still welcome.

[shiner69]

Also have an Aussie t3020.  Had same problem with home key but after doing what you suggested works okay.  Thanks

[BobRoss23]

Racerboy, on 03 September 2011 - 08:57 AM, said:

TO ALL Telstra T3020 USERS info needed so that Sebastian can maybe change the keymapping on CWM......

If you go into the advances menu theres a key test function, can you use that and post the values its reporting for all the physical keys on the device? thx

just tested it on my telstra t3020

the numbers in your example were completely right:

green/call button 231
end call 107
vol+115
vol- 114
power button 142

[NunoMGNunes]

My android is a TMN Soft Stone aka ZTE Racer

I need help to backup the data base

Brand: TMN (ZTE)
Model: Soft Stone (Racer)
Baseband version: ECLR_P726NV1.0.1B02
Kernel verson:
2.6.29
zte-kernel@Zdroid-SMT
Bluid number: ECLR_P726NV1.0.1B01

Thanks for help

[Racerboy]

NunoMGNunes, on 17 September 2011 - 08:23 AM, said:

My android is a TMN Soft Stone aka ZTE Racer

I need help to backup the data base

Brand: TMN (ZTE)
Model: Soft Stone (Racer)
Baseband version: ECLR_P726NV1.0.1B02
Kernel verson:
2.6.29
zte-kernel@Zdroid-SMT
Bluid number: ECLR_P726NV1.0.1B01

Thanks for help

you want help to backup your stock rom and install a custom rom or do you simply want to dump your ROM for future purposes?

Edited by Racerboy, 17 September 2011 - 10:13 AM.

[NunoMGNunes]

Work in TMN Soft Stone, i a new user

This a need backup this a rom e a not work help

Edited by NunoMGNunes, 17 September 2011 - 10:41 PM.

[NunoMGNunes]

Racerboy, on 17 September 2011 - 09:54 AM, said:

you want help to backup your stock rom and install a custom rom or do you simply want to dump your ROM for future purposes?

This install this a new rom e backup this a not worked

[Vlatko25]

NunoMGNunes, on 24 September 2011 - 12:02 AM, said:

This install this a new rom e backup this a not worked

On malshenzu.com they made recovery 5.0.2.3 Chinese Version very new and good  can you sebastian do that:D

[KapTmaH]

ZTE Racer - ClockWorkMOD-5.0.2.7

Edited by KapTmaH, 02 November 2011 - 04:50 PM.

[Vlatko25]

KapTmaH, on 02 November 2011 - 04:50 PM, said:

ZTE Racer - ClockWorkMOD-5.0.2.7

gen 1 or gen 2:D