Guest keyboard c Posted February 22, 2011 Report Share Posted February 22, 2011 (edited) hey guys i found this awesome programme i dont know the developers if you know them thank them!! :huh: instruction: 1.install it on main memory!! 2.run "Set S3Clock" 3.tap "FPU enabler" 4.now tap "patch" 5.you'll see these: 6.tap "ok" and tap "FPU enabler" and "patch" and ok again!! 7.tap ok and now choose one of cpu speeds and tap "s3 clock" 8. as you see your cpu speed have changed: Be careful: in part 6 do not close program until you see this: i tested 1ghz and suggest you not to use it 'cause your devise will crash!! but 980 & 954 are ok! have fun with speed!! :)Daskalos_20Easy_20Set_20S3Clock_20v1.6.20.cab Edited February 22, 2011 by keyboard c Link to comment Share on other sites More sharing options...
Guest ahmet__01 Posted February 24, 2011 Report Share Posted February 24, 2011 thanks. good share. Link to comment Share on other sites More sharing options...
Guest RochoLaRoca Posted February 24, 2011 Report Share Posted February 24, 2011 Works on Omnia i900??? Link to comment Share on other sites More sharing options...
Guest giellibon Posted February 24, 2011 Report Share Posted February 24, 2011 Thx for this upload, it really works! There is one thing, when I overclock my omnia lite, the vibrating function is very low. Is there a solution for this? Link to comment Share on other sites More sharing options...
Guest keyboard c Posted February 24, 2011 Report Share Posted February 24, 2011 Thx for this upload, it really works! There is one thing, when I overclock my omnia lite, the vibrating function is very low. Is there a solution for this? i dont have this problem so i dont have a solution ! sorry!! :huh: Link to comment Share on other sites More sharing options...
Guest keyboard c Posted February 24, 2011 Report Share Posted February 24, 2011 Works on Omnia i900??? i'm not sure! but i know that it works on omnia 2 just try it!! Thx for this upload, it really works! There is one thing, when I overclock my omnia lite, the vibrating function is very low. Is there a solution for this? i dont have this problem so i dont have the solution ! sorry :) :huh: Link to comment Share on other sites More sharing options...
Guest (eDDy) Posted February 25, 2011 Report Share Posted February 25, 2011 Works on Omnia i900??? No, it doesn't. Omnia i900 hasn't the same cpu of the OLite one. If you run it, you may damage your phone! Link to comment Share on other sites More sharing options...
Guest keyboard c Posted February 25, 2011 Report Share Posted February 25, 2011 (edited) No, it doesn't. Omnia i900 hasn't the same cpu of the OLite one. If you run it, you may damage your phone! tnx eddy for your info I Do Not Take Any Responsibility About Any Kind Of Damage! by the way some guy tested it on omnia he didn't got any result but no damage! :huh: Edited February 25, 2011 by keyboard c Link to comment Share on other sites More sharing options...
Guest zhuchella Posted May 3, 2011 Report Share Posted May 3, 2011 ToALL Can anybody refresh the pictures in the instruction on the top of this page ? On my browser there are no pictures :mellow: Link to comment Share on other sites More sharing options...
Guest keyboard c Posted May 4, 2011 Report Share Posted May 4, 2011 ToALL Can anybody refresh the pictures in the instruction on the top of this page ? On my browser there are no pictures :D sorry! i don't have the pictures! but if you follow the written instructions you won't need the picture good luck! :o by the way i don't have my cell phone any more! :mellow: Link to comment Share on other sites More sharing options...
Guest zhuchella Posted May 4, 2011 Report Share Posted May 4, 2011 by the way i don't have my cell phone any more! :mellow: why? because of this instruction ? Link to comment Share on other sites More sharing options...
Guest ak_apex Posted November 13, 2011 Report Share Posted November 13, 2011 hey after part 8 do we have to tap "QUIT" or "HIDE" ?????? Link to comment Share on other sites More sharing options...
Guest s6602 Posted November 25, 2011 Report Share Posted November 25, 2011 Thank.<BR closure_uid_s3mzq6="561">I try. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now