Guest mannas Posted March 6, 2011 Report Share Posted March 6, 2011 I know I maybe asking too much but would it be possible to port the htc marvel rom to blade there are lots of good features in gingerbread sense features: ROM dump: http://www.morninglion.com/tp2martin/Marvel_Dump.zip Link to comment Share on other sites More sharing options...
Guest hecatae Posted March 6, 2011 Report Share Posted March 6, 2011 I know I maybe asking too much but would it be possible to port the htc marvel rom to blade there are lots of good features in gingerbread sense features: ROM dump: http://www.morninglion.com/tp2martin/Marvel_Dump.zip so whats in the rom dump? Link to comment Share on other sites More sharing options...
Guest Pelemane Posted March 6, 2011 Report Share Posted March 6, 2011 What is HTC Marvel? Is it HTC Wildfire S? Or Desire S? I think that phone in the video is Desire S. I guess that rom dump is HTC Marvels stock rom. (whatever Marvel is :() Link to comment Share on other sites More sharing options...
Guest hecatae Posted March 6, 2011 Report Share Posted March 6, 2011 wildfire s Display;Resolution: 320 x 480 which is MDPI, not HDPI like blade Link to comment Share on other sites More sharing options...
Guest mannas Posted March 6, 2011 Report Share Posted March 6, 2011 (edited) wildfire s Display;Resolution: 320 x 480 which is MDPI, not HDPI like blade it is wildfire s would it be to difficult to resise? I thought it was already done a resise of a rom from the original wildfire to a nexus one I thought a port from this htc device would be easier then the others since it has the same cpu as blade Edited March 6, 2011 by mannas Link to comment Share on other sites More sharing options...
Guest ololizoz Posted March 6, 2011 Report Share Posted March 6, 2011 What about the HTC Desire rom's? The Desire is HDPI and it's resolution is 800x480. Link to comment Share on other sites More sharing options...
Guest mannas Posted March 6, 2011 Report Share Posted March 6, 2011 What about the HTC Desire rom's? The Desire is HDPI and it's resolution is 800x480. is it AMRv6? Link to comment Share on other sites More sharing options...
Guest Pelemane Posted March 6, 2011 Report Share Posted March 6, 2011 is it AMRv6? No. It's ARMv7. Link to comment Share on other sites More sharing options...
Guest mannas Posted March 6, 2011 Report Share Posted March 6, 2011 No. It's ARMv7. correct me if i am wrong but i think it isn't possible to port a rom from AMRv7 to AMRv6 Link to comment Share on other sites More sharing options...
Guest Victor von Zeppelin Posted March 6, 2011 Report Share Posted March 6, 2011 No. It's ARMv7. Not that the bits aren't standard java executables or something? I thought Sense was only some framework tweaks and small programs Link to comment Share on other sites More sharing options...
Guest FelixL Posted March 6, 2011 Report Share Posted March 6, 2011 What I was told: Take the binaries from an armV6-device, and the framework and apps from a device with the same resolution, and hope that they work together. http://www.cronosproject.org/forum/viewtop...mp;t=768#p27372 Link to comment Share on other sites More sharing options...
Guest mannas Posted March 6, 2011 Report Share Posted March 6, 2011 What I was told: Take the binaries from an armV6-device, and the framework and apps from a device with the same resolution, and hope that they work together. http://www.cronosproject.org/forum/viewtop...mp;t=768#p27372 did you have any luck with your port? Link to comment Share on other sites More sharing options...
Guest curl66 Posted March 6, 2011 Report Share Posted March 6, 2011 for what reason this should be done ? there is a working cyanomod...and lot of different launchers? may be the community should start an own UI. but thats an other topic there are so many issuse beside the porting ...udates.. bugfixes... testing.. also copyright stuff , sense is owned by htc. if you love sense so much just buy a desire Link to comment Share on other sites More sharing options...
Guest mannas Posted March 6, 2011 Report Share Posted March 6, 2011 (edited) for what reason this should be done ? there is a working cyanomod...and lot of different launchers? may be the community should start an own UI. but thats an other topic there are so many issuse beside the porting ...udates.. bugfixes... testing.. also copyright stuff , sense is owned by htc. if you love sense so much just buy a desire can you give me the money to buy it please? I was the owner of htc tattoo because it was the only htc phone i could afford but it was very limited in hardware Edited March 6, 2011 by mannas Link to comment Share on other sites More sharing options...
Guest FelixL Posted March 6, 2011 Report Share Posted March 6, 2011 did you have any luck with your port? No, had only a small test with an automatic porting tool. Link to comment Share on other sites More sharing options...
Guest hecatae Posted March 7, 2011 Report Share Posted March 7, 2011 (edited) it is wildfire s would it be to difficult to resise? I thought it was already done a resise of a rom from the original wildfire to a nexus one I thought a port from this htc device would be easier then the others since it has the same cpu as blade grab the boot.img from the honeycomb sdk port, combine it with the system dump and report back you will need the keylayout for the blade, and to rotate the display 180 degrees in surfaceflinger Edited March 7, 2011 by hecatae Link to comment Share on other sites More sharing options...
Guest mannas Posted March 7, 2011 Report Share Posted March 7, 2011 (edited) grab the boot.img from the honeycomb sdk port, combine it with the system dump and report back you will need the keylayout for the blade, and to rotate the display 180 degrees in surfaceflinger I will try to learn how to do those things and then do that on wednesday because it's when i go back home where i have the conditions to do that thanks Edited March 7, 2011 by mannas Link to comment Share on other sites More sharing options...
Guest fonix232 Posted March 7, 2011 Report Share Posted March 7, 2011 Indeed best solution is to get binaries from that dump (and add blade-specific stuff like surfaceflinger, camera, sound, hw, etc) and add java parts to that from a Desire or Desire HD ROM. I will NOT try it though. Link to comment Share on other sites More sharing options...
Guest mannas Posted March 8, 2011 Report Share Posted March 8, 2011 Indeed best solution is to get binaries from that dump (and add blade-specific stuff like surfaceflinger, camera, sound, hw, etc) and add java parts to that from a Desire or Desire HD ROM. I will NOT try it though. can this be made with the htc kitchen? sorry if this is a noob question to do but this is the first time i try to make a custom rom and i dont know anything about it Link to comment Share on other sites More sharing options...
Guest mannas Posted March 8, 2011 Report Share Posted March 8, 2011 grab the boot.img from the honeycomb sdk port, combine it with the system dump and report back you will need the keylayout for the blade, and to rotate the display 180 degrees in surfaceflinger I have done that and it stays on the green droid and after a while it reboots to recovery. any ideias? Link to comment Share on other sites More sharing options...
Guest hecatae Posted March 8, 2011 Report Share Posted March 8, 2011 I have done that and it stays on the green droid and after a while it reboots to recovery. any ideias? what does ADB say? Link to comment Share on other sites More sharing options...
Guest mannas Posted March 8, 2011 Report Share Posted March 8, 2011 what does ADB say? It isnt working as sayed before this is my. first. experience with making a custom ROM so. i dont know how to fix this things but i will try Link to comment Share on other sites More sharing options...
Guest HCDR.Jacob Posted March 8, 2011 Report Share Posted March 8, 2011 I tried porting this but it didn't boot. No adb so no logcat and kmsg was useless. Given up for now, I might take another look sometime. Link to comment Share on other sites More sharing options...
Guest mannas Posted March 8, 2011 Report Share Posted March 8, 2011 I tried porting this but it didn't boot. No adb so no logcat and kmsg was useless. Given up for now, I might take another look sometime. I remember that you also tried to port 2.2 sense from wildfire to tattoo but you didn't completed it Link to comment Share on other sites More sharing options...
Guest hecatae Posted March 10, 2011 Report Share Posted March 10, 2011 same dump and huashan leak have been used to create a Sense 2.1 rom for the HTC Vision http://www.villainrom.co.uk/forum/content....-1.0-HTC-Vision might give a clue of what's needed Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now