394 replies to this topic

[ULJ]

MeX_DK, on Jul 1 2011, 11:24, said:

No thats not it. When I flash that file with CWM it says its 602 RIL >_<

That is just some text written in the flashable zip. The text could be anything and does necessarily resemble the content of the zip. I believe it is the correct RIL file.

[Jay-V]

MeX_DK, on Jul 1 2011, 11:24, said:

No thats not it. When I flash that file with CWM it says its 602 RIL >_<

There was another one in inside the big ROM thread: PushMe

Dunno if it is the same you already tried.

[Squide]

Still there's a problem with the buletooth driver I guess..

when listening music via bluetooth and surfing web the same time..
need a battery pull sometime.

I never experienced this when I was using 0405baseband..
my bluetooth device is Sony Ericssion MW600
anyone have similar issue?

Edited by Squide, 01 July 2011 - 12:52 PM.

[jon.m.knight]

Has anyone noticed a degradation in 3g performance with 622BB & RIL? ... I'm struggling to get my handset to load pages which would otherwise load reasonably fast with earlier revisions of the BB. Was happening yesterday, which I just put down to my network having issues or something, but is like it today again too. Is fine in most areas, however not at work (when it used to work fine before)

ta

[zebbe77]

Thanks for the tutorial Paul, flashed the latest baseband whitout problems.

[maniacdave]

Hi,

what about NVflash images? After all, that's the only supported and appropriate tool for nVidia-based HW like Optimus 2X. NVflash is also multiplatform, many people don't use/have Windows...

Please, provide a plain BIN flash image for use with nvflash too. Thank you!

[defectivereject]

Anyway to install this on a Mac?

[globulerouge]

Thank you Paul, you're GREAT !!!

[PaulOBrien]

Updated with a Gingerbread 0622 baseband. ONLY install if you are having problems with the Gingerbread release.

P

[mauaus]

Paul, on 18 July 2011 - 02:23 PM, said:

Updated with a Gingerbread 0622 baseband. ONLY install if you are having problems with the Gingerbread release.

P

Do we need a new 622 Ril with the gingerbread release? Or should we use the old 622 RIL

[PaulOBrien]

The Gingerbread build is ONLY for the Gingerbread leak, not CM etc.

P

[mauaus]

Paul, on 18 July 2011 - 04:45 PM, said:

The Gingerbread build is ONLY for the Gingerbread leak, not CM etc.

P

Just tried it on CM7 and its working fine

Edit: Ouch, i tried to push the ril in the gb rom and i get no network hhahaha old 622 Ril works just fine though

Edit #2: Ever get tired of being right?

Edited by mauaus, 18 July 2011 - 05:42 PM.

[NiTroZiK]

Paul, on 18 July 2011 - 04:45 PM, said:

The Gingerbread build is ONLY for the Gingerbread leak, not CM etc.

P

Sorry Paul,just tryed with latest cm7 #81 and work all good , battery life is Fantastic...best modem ever tryed until now.

[dolby58]

Hi,




I was going to try to flash new BB to my O2x, but the warning "Installing this file WILL fully wipe your device, including the Internal SD. Back up!" is confusing.

Does this mean that after flashing the new BB, I also need to flash the rom again or not?

Now I have stock 10C, and would like to stay with that.

Edited by dolby58, 19 July 2011 - 11:15 AM.

[mauaus]

NiTroZiK, on 19 July 2011 - 05:46 AM, said:

Sorry Paul,just tryed with latest cm7 #81 and work all good , battery life is Fantastic...best modem ever tryed until now.

What Ril did you pair it up with?
Weird when i installed it it worked fine for a while until i tried to flash the new 622 ril i extracted from Pauls leaked GB rom, then it went batshit crazy and wouldnt connect to network. Tried to flash the old 622 but no luck :S

[Stefing]

Does the Gingerbread baseband 622 require the same RIL as the standard 622 baseband?

EDIT: sorry, I've seen your earlier comment, I understand the RIL is already baked into the recent alpha and not available separately / suitable for anything else?

Edited by Stefing, 20 July 2011 - 08:41 AM.

[kuronow]

Hi i just came here to see if you can tell me if there is a diference from this FW with the baseband and RIL  of the firmware in this post
http://forum.xda-dev...15&postcount=17
this is the firmware for a P990H wich is the device i have, and is from Latin America,  so as some of you can know phones from america and europe have diferent chips
i currently have on my phone 1035.21_20110602 as baseband, and have the RIL 622 , my 3G is not working so well as i wish...  i hope you can help me, or help another O2x from america in general . Thanks in advance

[gaww1]

Paul, on 25 March 2011 - 03:18 PM, said:

I'm please to make the latest (*at time of writing) LG 2X baseband release available for your use in SmartFlash format. You can check your current baseband in your device's 'About' page.

Please note that you use this at your own risk!

Installing this file WILL fully wipe your device, including the Internal SD. Back up!

SmartFlash for P990 is for use on Windows PCs.

To use P990 flash to flash this baseband:

• Download the utility file below
• Download the driver file below
• Download the baseband file below
• Run the SmartFlashTool_P990.exe application on your PC
• Turn device off, remove battery, plug device in while holding volume down - you should see a software update message on screen and the COM port should be filled automatically in the flash application below after installing the drivers if required.
• Select the 'ROM Copy D/L' tab
• Ensure 'Normal Mode' is selected
• Ensure 'Erase CAL' is NOT selected
• Click the browse button next to 'CP Bin:' and select the baseband (FLS) file
• Click 'Start' and wait for the flash to complete

The all important files...

Paul - when I try to flash ROM with SmartFlash, it starts up but errors with "can't read magic number".

What is it looking for?

[flyingdog77]

Guys,
I installed GR2, works great, smoth and fast.. the only big big issue... battery drain is back and I can't hook on H network anymore, only 3G with a continuous flap G-3G (I believe the reason for the draining)... I tried both basebands, 622 and 622v20a (gb) ... same story.. I'll try to ask for a new sim car and in the while I must go back to 622 with fr19. do you have any clue?

[flyingdog77]

flyingdog77, on 29 July 2011 - 07:52 AM, said:

Guys,
I installed GR2, works great, smoth and fast.. the only big big issue... battery drain is back and I can't hook on H network anymore, only 3G with a continuous flap G-3G (I believe the reason for the draining)... I tried both basebands, 622 and 622v20a (gb) ... same story.. I'll try to ask for a new sim car and in the while I must go back to 622 with fr19. do you have any clue?

sorry wrong place to post, going to post to the right thread