130 replies to this topic

[Zatoikis]

Hello,

After many tries to re-soft my phone, ZTE-v880 china unicom, 160M, (had android 2.2), I managed to bricke my phone
I dont know, but i think is gen1 phone, maybe you could tell me.
My situation right now:

I have an zte v880 - flashed with Unicom Chinese retail version of blade(U X880) , running with 256 mb system ram.
Now, the phone just stucks in clockworkmod v3.0.2.4. Tried to install from it :
v880_conversion_recovery\YSPN_P729VV1.0.0B07-NO_RECOVERY-update_signed.zip
and
r12-update-modacocustomrom-blade-kitchen-unsigned.zip
and
Swedish_Spring_RLS5.zip

using  clockworkmod, says everything is ok, but after reboot, the system is back in clockwork mod.

E believe that I need Unicom Chinese retail version of blade for V880 but i didnt find it.

Could you, please give me some advices how to fix my phone?

Thank You,

Edited by Zatoikis, 08 July 2011 - 02:04 PM.

[hedgepigdaniel]

Zatoikis, on Jul 9 2011, 00:04, said:

Hello,

After many tries to re-soft my phone, ZTE-v880 china unicom, 160M, (had android 2.2), I managed to bricke my phone
I dont know, but i think is gen1 phone, maybe you could tell me.
My situation right now:

I have an zte v880 - flashed with Unicom Chinese retail version of blade(U X880) , running with 256 mb system ram.
Now, the phone just stucks in clockworkmod v3.0.2.4. Tried to install from it :
v880_conversion_recovery\YSPN_P729VV1.0.0B07-NO_RECOVERY-update_signed.zip
and
r12-update-modacocustomrom-blade-kitchen-unsigned.zip
and
Swedish_Spring_RLS5.zip

using  clockworkmod, says everything is ok, but after reboot, the system is back in clockwork mod.

E believe that I need Unicom Chinese retail version of blade for V880 but i didnt find it.

Could you, please give me some advices how to fix my phone?

Thank You,

your NV memory is corrupt. follow the instructions in the OP for restoring your IMEI.

download this, flash in clockworkmod. reboot into FTM mode and follow instructions.

what were you trying to do in the first place?

[burstlam]

Zatoikis, on Jul 8 2011, 22:04, said:

Hello,

After many tries to re-soft my phone, ZTE-v880 china unicom, 160M, (had android 2.2), I managed to bricke my phone
I dont know, but i think is gen1 phone, maybe you could tell me.
My situation right now:

I have an zte v880 - flashed with Unicom Chinese retail version of blade(U X880) , running with 256 mb system ram.
Now, the phone just stucks in clockworkmod v3.0.2.4. Tried to install from it :
v880_conversion_recovery\YSPN_P729VV1.0.0B07-NO_RECOVERY-update_signed.zip
and
r12-update-modacocustomrom-blade-kitchen-unsigned.zip
and
Swedish_Spring_RLS5.zip

using  clockworkmod, says everything is ok, but after reboot, the system is back in clockwork mod.

E believe that I need Unicom Chinese retail version of blade for V880 but i didnt find it.

Could you, please give me some advices how to fix my phone?

Thank You,

Chinese Unicom Version Blade are Gen2 base. don't flash any other gen2 firmware(they are 512mb base) on it.

[Zatoikis]

Ok, so:
I downloaded that pack, that brought my phone in FTM mode.
After this I've used :
blade_stock_froyo_firmware_china_unicom_11
but at 99% got an error:
NV cannot be backuped/restored without BSN
After pressing OK, says finished and after rebooting the phone, got the same mode FTM.
What can I do next?
Thank You,

[V5er]

hedgepigdaniel, on Jul 6 2011, 11:35, said:

@galorin:

put channel1.nvm in the folder with the exe, run it in restore NV mode with IMEI/BT/Unlock info selected

@V5er:

make sure you follow those instructions in the guide carefully and try to get it to work

Cheers mate it worked seamlessly this time! I owe you some beers!

[Zatoikis]

Hello,

After I've put channel1.nvm from the site, worked like a charm

Thank you guys,

[shmizan]

hedgepigdaniel you must have the best karma on earth.
you saved the lives of so many Blades and their users

[burstlam]

Zatoikis, on Jul 8 2011, 23:40, said:

Ok, so:
I downloaded that pack, that brought my phone in FTM mode.
After this I've used :
blade_stock_froyo_firmware_china_unicom_11
but at 99% got an error:
NV cannot be backuped/restored without BSN
After pressing OK, says finished and after rebooting the phone, got the same mode FTM.
What can I do next?
Thank You,

I am soory that I am not sure what went wrong, I think there is something missing rather than IMEI only.
The only thing I can tell is BSN means Board Serial Number.  
I will post a request in the Chinese Forum and I hope I could get a backup copy of Unicom Blade and hopes it may help.

[Merinalle]

Many thanks for your advice. My phone is already running, I can use WiFi and play music. The final main issue remaining:
My imei for the Gen2 phone cannot be updated fully to make the phone register with normal sim to network.

With the help of the programs described on this page I managed to make a copy of my Channel1.nvm. I edited the file with
a hex editor, but succeeding only partly. I have only the 5 first digits of imei visible after the check *#06#

<imei> 3 xx xx 00 40 80 xx xx - the first 3 needing the A (3A) - > 3A xx xx 0A 04 08 xx xx what about the rest...

[calza]

Hey guys

I accidently put the wrong clockwork recovery on my blade and it is messed up. I have tried fastboot and it doesn't seem to do anything.

I have tried this method but I get this.



Is there anything I can do?

[hedgepigdaniel]

@calza

you need to do what I said in post 20 of your thread

• Download the custom Gen2 v7 packages from here
  
• extract the files folder and put it in the v880 conversion recovery folder from this guide, and select it under the SW directory
  
• boot phone into DFU mode, tick "download cefs", "no backup/restore", and "download"
  
• after it finishes your phone should be in FTM mode (if not, reboot with volume down held)
  
• Follow the instructions in the OP here to restore your IMEI. you can back it up from the phone, edit it, and then restore it and your IMEI/network should work.

If your phone is not broken physically, you can definitely fix it this way.

[calza]

hedgepigdaniel, on Jul 10 2011, 00:08, said:

@calza

you need to do what I said in post 20 of your thread

• Download the custom Gen2 v7 packages from here
  
• extract the files folder and put it in the v880 conversion recovery folder from this guide, and select it under the SW directory
  
• boot phone into DFU mode, tick "download cefs", "no backup/restore", and "download"
  
• after it finishes your phone should be in FTM mode (if not, reboot with volume down held)
  
• Follow the instructions in the OP here to restore your IMEI. you can back it up from the phone, edit it, and then restore it and your IMEI/network should work.

If your phone is not broken physically, you can definitely fix it this way.

It is still not working, this is what I get. In DFU mode is the blade supposed to stay at the green android? Because I can't get it to at all.

[hedgepigdaniel]

calza, on Jul 10 2011, 21:08, said:

It is still not working, this is what I get. In DFU mode is the blade supposed to stay at the green android? Because I can't get it to at all.

No, read the first post of this thread carefully.
In DFU mode the screen will be black. Turn the phone on with BOTH volume buttons held down. the notification LED will flash red. and then there will be no sign of life. that is DFU mode.

EDIT:

Oh I see...

your screenshot looks like it was in DFU mode, and the downloader can see it alright. Were there any error messages not in the screenshot? Did it fail immediately or did it do something for a while? If so, how far did it get? Does your phone act differently when you turn it on normally after this?
I don't know what the problem would be now - I'm beginning to think your phone is bricked.

Edited by hedgepigdaniel, 10 July 2011 - 12:13 PM.

[burstlam]

Merinalle, on Jul 10 2011, 01:34, said:

Many thanks for your advice. My phone is already running, I can use WiFi and play music. The final main issue remaining:
My imei for the Gen2 phone cannot be updated fully to make the phone register with normal sim to network.

With the help of the programs described on this page I managed to make a copy of my Channel1.nvm. I edited the file with
a hex editor, but succeeding only partly. I have only the 5 first digits of imei visible after the check *#06#

<imei> 3 xx xx 00 40 80 xx xx - the first 3 needing the A (3A) - > 3A xx xx 0A 04 08 xx xx what about the rest...

except the first set that the "0" should change to an "A"
all other sets should remain in dec format. so. it should be 3A XX XX 00 04 08 XX XX

[calza]

hedgepigdaniel, on Jul 10 2011, 13:07, said:

No, read the first post of this thread carefully.
In DFU mode the screen will be black. Turn the phone on with BOTH volume buttons held down. the notification LED will flash red. and then there will be no sign of life. that is DFU mode.

EDIT:

Oh I see...

your screenshot looks like it was in DFU mode, and the downloader can see it alright. Were there any error messages not in the screenshot? Did it fail immediately or did it do something for a while? If so, how far did it get? Does your phone act differently when you turn it on normally after this?
I don't know what the problem would be now - I'm beginning to think your phone is bricked.

Yeah I have tried that and it just doesn't do that.

I get this error message about a second in.

[burstlam]

calza, on Jul 10 2011, 20:28, said:

Yeah I have tried that and it just doesn't do that.

I get this error message about a second in.

try to connect the phone with another set of usb cable and usb port,
if error prevails, probably there is physical damage (or a damaged small bootloader that controls dfu mode, tpt etc..) with the motherboard of your phone.

I am using the OLED B01 version. when my phone boot into  DFU mode.
It is a black screen and no LED lights up, just barely a notification sound of windows.

[hedgepigdaniel]

calza, on Jul 10 2011, 22:28, said:

Yeah I have tried that and it just doesn't do that.
I get this error message about a second in.

hmm... I'm pretty sure that's not English or Chinese

Are you sure you have set the SW directory to the files from the custom v7b package? I can't see if its just been cut off in the box or if you've forgotten to set it.

Failing that, you can experiment with the armprg file (that's a bootloader that is downloaded to the phone for the purposes of flashing firmware) - if you look in the root folder of the custom v7b package you will find such a file, but I don't know what difference it will make.

If you haven't tried it, you can convert the stock gen2 package from my guide into a image.bin using fonix232s converter. Put the image.bin file into the root of your SD card and power on holding menu and volume up. It's meant to work like a TPT.

I don't really know what else to do. If none of the above works, then I'm afraid I'm lost.

[calza]

hedgepigdaniel, on Jul 10 2011, 13:52, said:

hmm... I'm pretty sure that's not English or Chinese

Are you sure you have set the SW directory to the files from the custom v7b package? I can't see if its just been cut off in the box or if you've forgotten to set it.

Failing that, you can experiment with the armprg file (that's a bootloader that is downloaded to the phone for the purposes of flashing firmware) - if you look in the root folder of the custom v7b package you will find such a file, but I don't know what difference it will make.

If you haven't tried it, you can convert the stock gen2 package from my guide into a image.bin using fonix232s converter. Put the image.bin file into the root of your SD card and power on holding menu and volume up. It's meant to work like a TPT.

I don't really know what else to do. If none of the above works, then I'm afraid I'm lost.

Ok I will try that.

Is my phone worth anything in this state? I need a working smartphone for friday for work but I don't really have enough money to not be able to sell this one if I can't get it to work.

I tried the image.bin thing, it didn't work. It just feels like the blade will only boot into or try to boot into clockwork (which is messed up anyway).

Edited by calza, 10 July 2011 - 01:29 PM.

[hedgepigdaniel]

calza, on Jul 10 2011, 23:09, said:

Ok I will try that.

Is my phone worth anything in this state? I need a working smartphone for friday for work but I don't really have enough money to not be able to sell this one if I can't get it to work.

I tried the image.bin thing, it didn't work. It just feels like the blade will only boot into or try to boot into clockwork (which is messed up anyway).

You can advertise a bricked blade on ebay and see if you get any takers I guess. Good luck...

[Vvorth]

Hi, my friend got bricked blade(china v880), so please tell me which ROM to use to restore it with this tool?