530 replies to this topic

[evanb3]

is it possible to over clock on stock rom ?

[gusper]

evanb3, on 01 November 2011 - 09:25 AM, said:

is it possible to over clock on stock rom ?

Of course


Root with the Z4root software, do a search.

Install Set CPU (need to buy this)

Really should ask this question in a new field.

[Gaz14]

gusper, on 02 November 2011 - 01:10 PM, said:

Of course


Root with the Z4root software, do a search.

Install Set CPU (need to buy this)

Really should ask this question in a new field.

you need to have a overclockable kernel installed first otherwise you will waste your money on set cpu

[pck.au]

New Liquid Metal, on 16 September 2011 - 09:25 AM, said:

Hi,
Anyone have this problem of not being able to wake the Tab up after going to sleep(eg.screen goes off)? I seem to encounter this problem twice now and each time I have to remove the battery and perform a cold boot. I am on the new 0819 ROM......if anyone encounter this problem and knows of a fix, pls let me(us) know here....

Thanks

I have the same problem. I am not sure if it is related to any firmware or hardware issue. This is the Australian version and had the same problem on 2011-08-15 and 2011-10-13. I needed to take the battery out to do cold boot too if it happened.

Today I found that it had the same problem when it was in wifi tethering mode. My other phone can connect to the wireless network but unable to connect to the internet. If the CPU hanged I think the wifi network from the tab should not work or am I wrong to think this way?

[bwk0]

Hello,

I'm trying to install CM7 on my Optus V9, but Clockwork always says
"can't mount /sdcard" when I click "choose zip from sdcard".


I've tried "mount /sdcard" (failed) and "reboot recovery" (didn't help)
from Clockwork.

Thanks for any help.  Details below in case it matters.


I've been following the instructions at
http://whirlpool.net...ablet_v9_optus.

I have no mswin box & had a friend upgrade it to android-2.2.

Didn't unlock it.

Fetched
      0) recovery-clockwork-4.0.1.5-v9-gen2.img
      1) OneClickRecoveryV9-4.0.0.8.apk
      2) update-cm-7.1.0-RC1-V9-KANG-signed-20110815.zip
      3) cm7_zte_v9_overclockable_kernel_ahb_20110808.zip
      4) gapps-gb-20110828-signed.zip
      5) z4root_blade_perm_root_v2.apk

(both versions of clockwork recovery tried below ...)

Installed AppInstaller from the market.

Had some trouble using AppInstaller to install z4root, so installed
z4root via adb instead.

Copied recovery-clockwork-4.0.1.5-v9-gen2.img to SD & ran
  flash_image recovery recovery-clockwork-4.0.1.5-v9-gen2.img

Installed ROM Manager from the market.

Copied cm7 & extra kernel & gapps to SD (2, 3, 4 above).

Ran clockwork recovery via ROM Manager, & got the "can't mount /sdcard"
mentioned.

So copied OneClickRecoveryV9-4.0.0.8.apk to SD & installed
with AppInstaller.  But still get "can't mount /sdcard".

------------------------------------------------------------------------

[Pradeep.vpk]

I have a optus ZTE V9 unlocked tablet running with android 2.2. can u please instruct me to upgrade it to the latest possible android version ( 2.3 or etc) ???

u can also reach me at [email protected] or pradeep.vpk in fb

thanks

kallt_kaffe, on 20 May 2011 - 06:39 PM, said:

Use Clockwork recovery v4.0.0.2 or later: http://android.podtw...y.php?device=v9
NOTE: This app installs Clockwork v4.0.0.8 for you: http://www.mediafire...mhueppg4idy7574

Description

• NOTE: Only for Gen2, ie devices that have been upgraded to 2.2 (If you want to upgrade to Gen2, repartition to a CM7 optimized layout and install CM7 at the same time, go here: http://android.modac...up-2011-08-15/)
• This is a build that corresponds to a "nightly" but it is highly unofficial!
• Use Google apps from here: http://goo-inside.me/gapps/
• Download 2011-07-11: http://www.mediafire...11v8jvnym999f7w
• Download 2011-07-15: http://www.mediafire...wmqhpcb98189ls9
• Download 2011-07-17: http://www.mediafire...06i64kbzc509vpp
• Download 2011-08-15: http://www.mediafire...a2lmasbzb4tjznq
  
• DO NOT FORGET TO WIPE!!!

Changelog

• 2011-08-15 - BT & Wifi can now coexist (stop both and start BT first if you have problems). Calibration is now controlled by kernel. Should make it work fine with capacitive screens again. New app for calibration and gesture emulation tweaking. It can also be used to turn on and off USB charging. Two finger rotation emulation can now also be done. Done just like the pinch-zoom emulation but on the other axis.
• 2011-07-17 - CM7 now has PAN support (bluetooth tethering) so I think it was worth syncing and compiling a new version.
• 2011-07-15 - Merged FM radio fixes (fixes battery drain) and camera fixes from the Blade project (Thansk TomG). More tweaking to the "slide-zoom".
• 2011-07-11 - Changed the pinch-zoom hack to work a bit different. Gives better control but isn't exaclty pinch-zoom anymore. Slide two fingers in parallell up or down like this:
• 
• 2011-07-08 - Added experimental pinch-zoom support. Far from perfect but should be good enough to make Angry Birds zoomin work.
• 2011-07-03 - Custom kernel with overclocking and extra scaling governors (interactive & smartass). Also both kernel and CM are now compiled for VMSPLIT_3G. This means that old kernels (pre 2011-07-03) is NOT compatible and must not be used
• 2011-06-27 - FM Radio & USB tethering (all thanks to the development on CM7 for the ZTE Blade), updated proprietary libs with new versions from TeliaSonera official 2.2 upgrade.
• 2011-06-15 - "Recent apps" now makes use of the full resolution of the screen.
• 2011-06-06 - Backgrounds are now highres. Rotary lockscreen correct size (and turned on by default). Android keyboard height increased. (Been reusing stuff invented for the Nook color CM7 port)
• 2011-05-31 - Install works fine (at least for me) but it needed some more /tmp space in Clockwork (se above).
• 2011-05-29 - This version really should work to install without running out of space on /tmp in Clockwork.
• 2011-05-28 - Fixed the installscript that was broken i the last version.
• 2011-05-27 - Removed hdpi graphics. Telephone audio should now always be routed to external speaker.
• 2011-05-25 - Touchscreen calibration support and also added ldpi and hdpi bitmaps (for those who experiment with different LCD densities)
• 2011-05-21 - Better autobrightness levels and lockscreen disabled by default.
• 2011-05-20 - Inital version

Tips & Tricks

• Go into Settings and CyanogenMod Settings and turn on the 180 degree rotation.

Sources: https://github.com/kalltkaffe

For AHB overclocking install this update! (Do NOT use this with previous (pre 2011-08-15) versions): http://www.mediafire...gnzrr154xw3xk8e NOTE: This is an optional update that overclocks the AHB bus with 50% (increases the memory access speed but can cause instability) and should be installed AFTER installing CM7.

Edited by Pradeep.vpk, 01 March 2012 - 07:40 AM.

[NZ Dunc]

Here is a link to swedroids cm7.2. I dont know if KK has linked to it yet. Sorry if he has.
http://translate.goo...ead.php?t=42958

Sent from my V9

[clutch3200]

hi there im new to flashing, can you teach me the steps on installing the overclock zip file on my v9 with 2.3.4 cm7 installed, coz i bricked my phone once while doing this alone but managed to restore it thru factory firmware.
ty in advance....

Edited by clutch3200, 04 May 2012 - 10:05 AM.

[draco01]

Model Number: light
Android version: 2.3.4
Baseband version: V9B01
Kernel: 2.6.35.7-perf+zte-kernel@Zdroid-SMT
build number: GB_V9_GENERIC1.0.0B06

Is there any way to root this device? i tried z4/zergrush/doomlord/unlockroot/superoneclick all latest versions but no luck....
when you go inside build.prop the ro.build.type = user
    ro.build.user = xuzhenxuan
any help?

[Yorvan]

I am so glad I was able to find this forum. I used to hang out at XDA since it help me flash my HTC magician to cotula's rom.

I have a 'virgin' ZTE v9 light that I was hoping to upgrade to gingerbread

Is it possible with the following specs?

Android version:
2.2

Baseband version:
V9B011

Kernel version:
2.6.32.9-perf

Build number:
V9_GENERICV1.0.0B02

I was planning on using CYANOGEN's build but I'm not sure if it will work on it. Btw, my ZTE's still lock to my phone network tho I don't use it much coz I have home internet.

Thanks much

[dzoni2zr]

just a quick reply to this topick.....
First of all greetings to all of u developers around the globe from Serbia
yeap the samall country with a lot of bulshit  hahahahaha

Regarding this topic...i am a proud owner of one ZTE Lite v9   and i must say since
i found this rom and topick and help  i have transformed my device to something i like
even more now.......It's working like a charm  

very good work and keep up,didn't have a single error since the flashing and update,and it's
working faster smoother i don't know i am impressed

Full strike for this one and wooww   did a tons of flashes mods all sorts of things on different devices
but never smooth like this and without error...excelente


Now i have a Zte Light v9  with this cynogen rom working extra

Edited by dzoni2zr, 03 November 2012 - 04:58 PM.