News + Articles
Sign In
Create Account
1
I tried to install CM 7 on my V9 with original 2.1. First I installed Clockwork Recovery and saved my image.
After that I read that the first step should have been to upgrade from Gen1 to Gen2 -> did that with TPT Gen1 to Gen2
Somethin must have failed here because the V9 didn´t boot anymore. There was only the text "build:" on the screen, 2/3 of the screen were black, the other part showed lines of different coloures.
Now the V9 seems to be really "dead": only black screen....
I took off the battery, pressed power on and teh volume-keys and plugged teh usb-cable into a pc -> nothing.
No FTM-mode or anything else. Just a black screen.
When I try to charge the battery the red light on the bottom blinks and it sounds like the V9 tries to make a restart on an on.
Any hints ??
After that I read that the first step should have been to upgrade from Gen1 to Gen2 -> did that with TPT Gen1 to Gen2
Somethin must have failed here because the V9 didn´t boot anymore. There was only the text "build:" on the screen, 2/3 of the screen were black, the other part showed lines of different coloures.
Now the V9 seems to be really "dead": only black screen....
I took off the battery, pressed power on and teh volume-keys and plugged teh usb-cable into a pc -> nothing.
No FTM-mode or anything else. Just a black screen.
When I try to charge the battery the red light on the bottom blinks and it sounds like the V9 tries to make a restart on an on.
Any hints ??
Edited by Norbert66, 11 November 2011 - 03:24 PM.
Back to top
